RCBS
KOKOSUPISTAVAT HOLKKISARJAT

076683335012 749004630

Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.

Lisää...

RCBS FULL LENGHT holkkisarjat eri kaliipereille. Laadukas perusholkkisarja kokosupistusholkilla ja luodinasetusholkilla, saatavilla yli 70 kaliiperiin.

Lisää...

Asiakasarviot: RCBS FULL LENGTH 2-DIE SET 7.5MM SCHMIDT RUBIN

Arvioiden lukumäärä: 6
Arvostelut brownells.com sivustolla: 6
Arvioiden keskiarvo: 3,2

Problems (10.5.2015)

I collect and shoot old military rifles using cast bullets. I like to set up my dies permanently with Forster die lock rings so I don't have to adjust them each time. So, I bought this die set, and an identical seater die as the one in the kit. I usually use one to seat and the other with the seater stem removed to crimp. The crimp ring in both dies is too high up into the body. I can literally drop a full length sized case into it all the way to the case web and still not come close to the crimper. With it in the shell holder, it's even farther from it. The die body is obviously too long, and RCBS needs to address this.

Quality reloading dies (11.2.2016)

The RCBS 300 AAC Blackout full-length dies are a great choice for anyone that is just getting started into reloading all the way up to the advanced reloader. These dies are very well machined with the inside smooth, polished, and free of any burrs that could damage the rifle brass. The high quality craftsmanship used to machine of these dies make resizing brass smooth, simple, and very consistent. The 300 AAC Blackout sizing die is very easy to adjust for sizing brass to the proper specifications. The bullet seating die is also very easy to adjust the bullet seating depth and the seating stem does not leave any marks on the bullets. The seating die also has built in roll crimp that can be adjusted by the depth of the die in the reloading press. Overall these dies are another high quality product from RCBS.

Save Your Money for a Better Die Set (26.2.2011)

RCBS makes some great products however their full length die set is not one of them. I used this die set for approximately a year and swithched to Redding becuase the parts that go into this die are of poor quality. e.g. decapping assembly and the itty bitty lock nut.

Great Die Set (24.2.2013)

This is a Great Die Set, very well constructed, Great service if you ever have a Problem.

Don't waste your money (16.8.2015)

I picked up these dies for a cheaper remington 700 so i could shoot out the barrel to replace into something else. I found out on trying to reload 95 gr nosler ballistic tips. The bullets tips are what pushes the bullet down leaving different COL and bad loads. Don't waste money on the bullet seating die sizing die is good.

Very high quality dies (12.7.2014)

Absolutely wonderful product, it is a very well made die set, RCBS have an excellent reputation. These dies would have cost a small fortune here in NZ (we pay a lot for imported goods) so importing myself saved me a lot. Came well packaged and very quickly, thanks Brownells.

Works flawlessly, would highly recommend, I am sure that it will serve me for years to come.

Lue 6 arvostelua lisää brownells.com sivustolla

74.9 144.9 34 EUR

Tuotenro: 749004630
RCBS FULL LENGTH 2-DIE SET 7.5MM SCHMIDT RUBIN
Valmistajan tuotenumero: 33501 076683335012 RCBS FULL LENGHT holkkisarjat eri kaliipereille. Laadukas perusholkkisarja kokosupistusholkilla ja luodinasetusholkilla, saatavilla yli 70 kaliiperiin. RCBS FULL LENGHT holkkisarjat eri kaliipereille. Laadukas perusholkkisarja kokosupistusholkilla ja luodinasetusholkilla, saatavilla yli 70 kaliiperiin.

84.9 EUR 2 84,90 € *

Toimitusaika noin 2-4 viikkoa.
2 kpl. USA:n varastossa

Ominaisuudet: Holkin tyyppi: Full Length Sizing Dies Patruuna: 7.5 mm Schmidt Rubin

RCBS KOKOSUPISTAVAT HOLKKISARJAT

Asiakasarviot: RCBS FULL LENGTH 2-DIE SET 7.5MM SCHMIDT RUBIN

Ominaisuudet

Tuotekuvaus

Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Asiakasarviot: RCBS FULL LENGTH 2-DIE SET 7.5MM SCHMIDT RUBIN

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

RCBS
KOKOSUPISTAVAT HOLKKISARJAT