Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Kattava ratkaisu patruunoiden lataamiseen
FULL LENGTH DIE SETS, FULL LENGTH 2-DIE SET .300 AAC BLACKOUT -sarja on suunniteltu bottleneck-tyyppisille kiväärin ja pistoolin patruunoille. Se sisältää:
- Koko pituuden koossa oleva die: Tämä die säätää patruunan olkapäätä, kun dieä nostetaan tai lasketaan puristimessa.
- Istutusdie: Tämä die istuttaa luodit oikein koko pituuden koossa oleviin tai kaulan koossa oleviin patruunoihin.
- Puristusrenkaat: Istutusdie sisältää sisäänrakennetun puristusrenkaan, joka mahdollistaa patruunan puristamisen luotiin, jos niin halutaan.
Suosittelemme käyttämään patruunan headspace-mittausvälinettä oikean olkapääbumpin saavuttamiseksi. Koko pituuden die myös koossa patruunan runkoa, jotta se mahtuu helposti seuraavaan laukaisuun, ja die poistaa käytetyn sytyttimen. Laajennuskuula kulkee patruunan kaulan läpi ja säätää kaulan oikeaan jännitykseen.
Muista voidella patruunat ennen koko pituuden koossa olemista. RCBS:n istutusdieset bottleneck-patruunoille ovat erinomainen valinta, ja ne auttavat sinua lataamaan ammuksia tehokkaasti. Koko pituuden 2-die set on latausprosessin perusta, ja monet ampujat kuluttavat useita piippuja tai kivääreitä käyttäen vain yhtä koko pituuden latausdiekkiä.
Suosittelemme uusille lataajille aloittamaan koko pituuden die setillä ja oppimaan, kuinka die asetetaan oikein ennen kuin siirrytään muihin latausdiekkeihin.