Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Lisää...
Sopii Useimpiin AR-tyylisiin .308 Kiväärialustoihin
Kestävä teräksinen, fosfaattikäsitelty lipas kestää kovat olosuhteet taistelussa ja kilpailuissa. Itselubrikoituva polymeeriseuraaja ja lämpökäsitelty, tarkasti kierretty jousi toimittavat 20 patruunaa luotettavasti ja johdonmukaisesti. Teräksinen pohjalevy irtoaa helposti puhdistusta varten. Sopii DPMS Panther LR -sarjan kivääreihin (.243, .260, .308 kaliiperi), Knight’s Armament SR-25, Remington R-25 (.308) ja Stoner SR-25. Ei sovi Armalite AR10 -aseisiin.
TEKNISET TIEDOT: Terästä, lämpökäsitelty, musta oksidipinnoite, polymeerisyöttäjä, 20 patruunan kapasiteetti. Pituus 55⁄8 tuumaa. Sopii DPMS Panther LR -sarjan kivääreihin (.243, .260, .308 kaliiperi), Knight SR-25, Remington R-25 (.308) ja Stoner SR-25. Ei sovi ArmaLite AR-10, Rock River Arms tai mihinkään kivääriin, joka käyttää FN/FAL -lehdenlaskijaa.
Lisää...
Asiakasarviot: PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Arvioiden lukumäärä: 9
Arvostelut brownells.com sivustolla: 9
Arvioiden keskiarvo: 3
Not Worth the $$(15.5.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.5.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.6.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.6.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.7.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.7.2013)
OK but a little balky in feeding.
Big fan!!!(19.4.2014)
LOVE IT
good mag for the price.(6.3.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(4.4.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.
Tuotenro: 687000069 PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK Valmistajan tuotenumero: DPM-A1708279010149 Kestävä teräksinen, fosfaattikäsitelty lipas kestää kovat olosuhteet taistelussa ja kilpailuissa. Itselubrikoituva polymeeriseuraaja ja lämpökäsitelty, tarkasti kierretty jousi toimittavat 20 patruunaa luotettavasti ja johdonmukaisesti. Teräksinen pohjalevy irtoaa helposti puhdistusta varten. Sopii DPMS Panther LR -sarjan kivääreihin (.243, .260, .308 kaliiperi), Knight’s Armament SR-25, Remington R-25 (.308) ja Stoner SR-25. Ei sovi Armalite AR10 -aseisiin.
49.9EUR049,90 €
*
Voi laittaa jälkitilaukseen. Kun saapuu varastoon, toimitusaika 2-4 kuukautta.
Ominaisuudet:Aktion tyyppi: Semi-AutoKapasiteetti: 20-RoundMateriaali: SteelMerkki: AR .308Patruuna: 308 Winchester, 7.62 mm NATOViimeistely: BlackMäärä: 1
Kestävä teräksinen lipas, jossa on fosfaattikäsittely ja musta oksidipinnoite, kestää kovia olosuhteita.
Yhteensopiva useiden kiväärimallien kanssa, kuten DPMS Panther LR, Knight’s Armament SR-25 ja Remington R-25.
Ei sovi ArmaLite AR-10 tai Rock River Arms -kivääreihin, eikä FN/FAL -lehdenlaskijaa käyttäviin kivääreihin.
Ominaisuudet
:
Kyllä
:
Kyllä
Kapasiteetti:
20-Round
Lukkolaitteen tyyppi:
Semi-Auto
Materiaali:
Steel
Patruuna:
308 Winchester,7.62 mm NATO
Valmistaja:
AR .308
Viimeistely:
Black
Toimituksen paino: 0,272kgToimituksen korkeus: 10mmToimituksen leveys: 114mmToimituksen pituus: 267mm
UPC
: 708279010149
Tuotekuvaus
Made in USA
USA:n vientiluvan tyyppi: 0A501.d
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti
Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi
Kestävä AR .308 20RD MAGAZINE, joka toimii luotettavasti taistelussa. ✨ Sopii useisiin kivääreihin, mutta ei Armalite AR10:een.
Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Lisää...
Sopii Useimpiin AR-tyylisiin .308 Kiväärialustoihin
Kestävä teräksinen, fosfaattikäsitelty lipas kestää kovat olosuhteet taistelussa ja kilpailuissa. Itselubrikoituva polymeeriseuraaja ja lämpökäsitelty, tarkasti kierretty jousi toimittavat 20 patruunaa luotettavasti ja johdonmukaisesti. Teräksinen pohjalevy irtoaa helposti puhdistusta varten. Sopii DPMS Panther LR -sarjan kivääreihin (.243, .260, .308 kaliiperi), Knight’s Armament SR-25, Remington R-25 (.308) ja Stoner SR-25. Ei sovi Armalite AR10 -aseisiin.
TEKNISET TIEDOT: Terästä, lämpökäsitelty, musta oksidipinnoite, polymeerisyöttäjä, 20 patruunan kapasiteetti. Pituus 55⁄8 tuumaa. Sopii DPMS Panther LR -sarjan kivääreihin (.243, .260, .308 kaliiperi), Knight SR-25, Remington R-25 (.308) ja Stoner SR-25. Ei sovi ArmaLite AR-10, Rock River Arms tai mihinkään kivääriin, joka käyttää FN/FAL -lehdenlaskijaa.
Lisää...
Asiakasarviot: PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Arvioiden lukumäärä: 9
Arvostelut brownells.com sivustolla: 9
Arvioiden keskiarvo: 3
Not Worth the $$(15.5.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.5.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.6.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.6.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.7.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.7.2013)
OK but a little balky in feeding.
Big fan!!!(19.4.2014)
LOVE IT
good mag for the price.(6.3.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(4.4.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.