One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Lisää...
3-yhdessä Säätövaihtoehdot
Yksi sarja, jonka avulla voit tarkasti säätää listattuja aseita saavuttaaksesi sileimmän kaksois- ja/tai yksitoimisen laukaisun vedon ja oikean toiminnan. SARJA #26520 COLT 1911 & COMMANDER - Sisältää yhden kappaleen 19 paunan, 20 paunan ja 21 paunan vasarajousia. Tehtaan jousi on 23 paunaa.
Lisää...
Asiakasarviot: WOLFF KIT #26520
Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 3,4
3 Springs in 1 Kit(22.10.2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(5.6.2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(5.12.2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27.5.2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22.11.2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!
Tuotenro: 969265200 WOLFF KIT #26520 Valmistajan tuotenumero: 26520 Yksi sarja, jonka avulla voit tarkasti säätää listattuja aseita saavuttaaksesi sileimmän kaksois- ja/tai yksitoimisen laukaisun vedon ja oikean toiminnan. SARJA #26520 COLT 1911 & COMMANDER - Sisältää yhden kappaleen 19 paunan, 20 paunan ja 21 paunan vasarajousia. Tehtaan jousi on 23 paunaa.
29.9EUR929,90 €
*
Toimitusaika noin 2-4 viikkoa. 9 kpl. USA:n varastossa
One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Lisää...
3-yhdessä Säätövaihtoehdot
Yksi sarja, jonka avulla voit tarkasti säätää listattuja aseita saavuttaaksesi sileimmän kaksois- ja/tai yksitoimisen laukaisun vedon ja oikean toiminnan. SARJA #26520 COLT 1911 & COMMANDER - Sisältää yhden kappaleen 19 paunan, 20 paunan ja 21 paunan vasarajousia. Tehtaan jousi on 23 paunaa.
Lisää...
Asiakasarviot: WOLFF KIT #26520
Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 3,4
3 Springs in 1 Kit(22.10.2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(5.6.2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(5.12.2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27.5.2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22.11.2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!