Features: Precision cut and bent for the greatest consistency possible New proprietary material for improved spring tension Material and geometry allows for improved reset When used in conjunction with the Glockworx Spring Kit (100-004-108), a 3lb trigger will be possible while maintaining a crisp, positive reset
Specs: Fits all Glock but Models 42 or 43.
Lisää...
Ominaisuudet: Tarkkaan leikattu ja taivutettu mahdollisimman suuren johdonmukaisuuden takaamiseksi. Uusi oma materiaali paremman jousen jännityksen saavuttamiseksi. Materiaali ja geometria mahdollistavat parannetun palautuksen. Käytettäessä yhdessä Glockworx-jousisarjan (100-004-108) kanssa, on mahdollista saavuttaa 3lb:n liipaisin säilyttäen samalla terävän, positiivisen palautuksen.
Specs: Sopii kaikkiin Glock-malleihin paitsi malleihin 42 tai 43.
Lisää...
Asiakasarviot: ZEV TECHNOLOGIES PRO CONNECTOR FOR GLOCK®
Arvioiden lukumäärä: 7
Arvostelut brownells.com sivustolla: 7
Arvioiden keskiarvo: 3,6
Light and silky smooth(10.12.2013)
Great product. Lighter and smoother than either the factory part or the Lone Wolf 3.5 lb connector. No gritty feel, no drag. I also bought the Ghost Ultimate, but haven't had a chance to try it yet. It might be as good as the Glockworx, but I don't see how it could be better. Combined with the Glockworx Competition Spring Kit you've got a pretty sweet trigger at a very reasonable cost.
Excellent connector(24.1.2014)
Best connector I've tried if wanting a lighter pull. High quality.
Maybe, maybe not(13.5.2014)
The trigger pull is great after installing this and a connector, but I have one problem. To describe it best, it's like the trigger safety gets "hung" on the Glock frame. I installed two on different Glocks and they both did it. I haven't gotten into a cure yet, but it will take one. I would not recommend this to someone who couldn't tweak it to get that out.
Works Good(10.5.2016)
This was quite the improvement over the stock connector. It eased the trigger press greatly and was very smooth in its function. It fit correctly and functioned flawlessly. I never oil the the connector and trigger bar as recommended by Glock, however I do lubricate this area will a small amount of fine graphite at each cleaning. Overall it is a good improvement for a small amount of money.
Zev Connector(5.6.2017)
I installed this on my Glock 19 and the trigger broke very late and had a spongie feel. The weight didn't drop compared to the factory part. The point to where the trigger would break wasn't a solid wall. I even tried 2 other complete triggers and they didn't function at all. I was unable to get the pistol to fire. Im a firearms examiner for a major dept and armorer to several brands of firearms. Not recommended.
Works as advertised.(12.6.2017)
Picked this up for a G17. When reassembled correctly, it reduced my trigger to about 3.7lb which is close enough. So I have no issues with the connector.
I did however also get the ZEV spring kit and did not have as good of luck with that. I have a review of that too, but the short version is the trigger spring caused issues.
CAUSED ACCIDENTAL DOUBLE FIRE(12.12.2017)
This connector should be used along with the Zev trigger only and not the stock Glock trigger or another aftermarket trigger. With the stock Glock trigger it takes some poundage off of the trigger pull, but it takes away the crisp wall and makes the trigger pull very mushy without a clear break. When used with a Hyve trigger, it made my glock unintentionally fire immediately upon the resetting of the trigger. In other words, it made my gun fire once when I pulled the trigger, then a second time when I took my finger off the trigger. Although to some a double fire trigger may be considered a "happy mistake" it is not safe to use in my gun for concealed carry purposes. I uninstalled this connector and put back in the stock one for a more predictable, safe, and clean trigger pull.
Tuotenro: 100012422 ZEV TECHNOLOGIES PRO CONNECTOR FOR GLOCK® Valmistajan tuotenumero: CONN-PRO811338030917 Ominaisuudet: Tarkkaan leikattu ja taivutettu mahdollisimman suuren johdonmukaisuuden takaamiseksi. Uusi oma materiaali paremman jousen jännityksen saavuttamiseksi. Materiaali ja geometria mahdollistavat parannetun palautuksen. Käytettäessä yhdessä Glockworx-jousisarjan (100-004-108) kanssa, on mahdollista saavuttaa 3lb:n liipaisin säilyttäen samalla terävän, positiivisen palautuksen.
36.9EUR136,90 €
*
Toimitusaika noin 2-4 viikkoa. 1 kpl. USA:n varastossa
Tarkkaan leikattu ja taivutettu mahdollisimman suuren johdonmukaisuuden takaamiseksi.
Materiaali ja geometria mahdollistavat parannetun palautuksen.
Käytettäessä yhdessä Glockworx-jousisarjan (100-004-108) kanssa, on mahdollista saavuttaa 3lb:n liipaisin säilyttäen samalla terävän, positiivisen palautuksen.
Made in USA
USA:n vientiluvan tyyppi: 0A501.x
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Paranna Glockiasi ZEV Technologies Pro Connectorilla! 🔧 Tarkka leikkaus ja uusi materiaali tarjoavat erinomaisen palautuksen ja jousen jännityksen.
Features: Precision cut and bent for the greatest consistency possible New proprietary material for improved spring tension Material and geometry allows for improved reset When used in conjunction with the Glockworx Spring Kit (100-004-108), a 3lb trigger will be possible while maintaining a crisp, positive reset
Specs: Fits all Glock but Models 42 or 43.
Lisää...
Ominaisuudet: Tarkkaan leikattu ja taivutettu mahdollisimman suuren johdonmukaisuuden takaamiseksi. Uusi oma materiaali paremman jousen jännityksen saavuttamiseksi. Materiaali ja geometria mahdollistavat parannetun palautuksen. Käytettäessä yhdessä Glockworx-jousisarjan (100-004-108) kanssa, on mahdollista saavuttaa 3lb:n liipaisin säilyttäen samalla terävän, positiivisen palautuksen.
Specs: Sopii kaikkiin Glock-malleihin paitsi malleihin 42 tai 43.
Lisää...
Asiakasarviot: ZEV TECHNOLOGIES PRO CONNECTOR FOR GLOCK®
Arvioiden lukumäärä: 7
Arvostelut brownells.com sivustolla: 7
Arvioiden keskiarvo: 3,6
Light and silky smooth(10.12.2013)
Great product. Lighter and smoother than either the factory part or the Lone Wolf 3.5 lb connector. No gritty feel, no drag. I also bought the Ghost Ultimate, but haven't had a chance to try it yet. It might be as good as the Glockworx, but I don't see how it could be better. Combined with the Glockworx Competition Spring Kit you've got a pretty sweet trigger at a very reasonable cost.
Excellent connector(24.1.2014)
Best connector I've tried if wanting a lighter pull. High quality.
Maybe, maybe not(13.5.2014)
The trigger pull is great after installing this and a connector, but I have one problem. To describe it best, it's like the trigger safety gets "hung" on the Glock frame. I installed two on different Glocks and they both did it. I haven't gotten into a cure yet, but it will take one. I would not recommend this to someone who couldn't tweak it to get that out.
Works Good(10.5.2016)
This was quite the improvement over the stock connector. It eased the trigger press greatly and was very smooth in its function. It fit correctly and functioned flawlessly. I never oil the the connector and trigger bar as recommended by Glock, however I do lubricate this area will a small amount of fine graphite at each cleaning. Overall it is a good improvement for a small amount of money.
Zev Connector(5.6.2017)
I installed this on my Glock 19 and the trigger broke very late and had a spongie feel. The weight didn't drop compared to the factory part. The point to where the trigger would break wasn't a solid wall. I even tried 2 other complete triggers and they didn't function at all. I was unable to get the pistol to fire. Im a firearms examiner for a major dept and armorer to several brands of firearms. Not recommended.
Works as advertised.(12.6.2017)
Picked this up for a G17. When reassembled correctly, it reduced my trigger to about 3.7lb which is close enough. So I have no issues with the connector.
I did however also get the ZEV spring kit and did not have as good of luck with that. I have a review of that too, but the short version is the trigger spring caused issues.
CAUSED ACCIDENTAL DOUBLE FIRE(12.12.2017)
This connector should be used along with the Zev trigger only and not the stock Glock trigger or another aftermarket trigger. With the stock Glock trigger it takes some poundage off of the trigger pull, but it takes away the crisp wall and makes the trigger pull very mushy without a clear break. When used with a Hyve trigger, it made my glock unintentionally fire immediately upon the resetting of the trigger. In other words, it made my gun fire once when I pulled the trigger, then a second time when I took my finger off the trigger. Although to some a double fire trigger may be considered a "happy mistake" it is not safe to use in my gun for concealed carry purposes. I uninstalled this connector and put back in the stock one for a more predictable, safe, and clean trigger pull.