Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Sama korkealaatuinen kilpatason liipaisin, jonka Nighthawk asentaa kaikkiin räätälöityihin pistooleihinsa. Valittavissa kiinteä tai luurankomainen shoe. Kaikissa malleissa on tarkat uritukset pinnassa positiivisen, liukumattoman sormikontaktin varmistamiseksi, mutta ei teräviä reunoja sormityynyn hankaamiseksi. Yliliikkumisen säätöruuvi ja kuusioavain myös sisältyvät. Kiinteä liipaisin shoe on saatavilla Short ja Medium pituuksissa. Custom mallissa on luurankomainen shoe ja erittäin leveä liipaisin bow lisävahvuuden takaamiseksi.
Asiakasarviot: NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 11
Arvioiden keskiarvo: 4,8
Stock look, Premium Quality.(17.2.2011)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(22.1.2014)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(9.11.2009)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(14.3.2010)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(25.10.2010)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(20.4.2011)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(14.7.2011)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(18.1.2013)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(27.4.2010)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(25.5.2011)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(12.6.2011)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.
Tuotenro: 100003273 NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT Valmistajan tuotenumero: SP0464080683000658 Sama korkealaatuinen kilpatason liipaisin, jonka Nighthawk asentaa kaikkiin räätälöityihin pistooleihinsa. Valittavissa kiinteä tai luurankomainen shoe. Kaikissa malleissa on tarkat uritukset pinnassa positiivisen, liukumattoman sormikontaktin varmistamiseksi, mutta ei teräviä reunoja sormityynyn hankaamiseksi. Yliliikkumisen säätöruuvi ja kuusioavain myös sisältyvät. Kiinteä liipaisin shoe on saatavilla Short ja Medium pituuksissa. Custom mallissa on luurankomainen shoe ja erittäin leveä liipaisin bow lisävahvuuden takaamiseksi.
54.9EUR354,90 €
*
Toimitusaika noin 2-4 viikkoa. 3 kpl. USA:n varastossa
Korkealaatuinen kilpatason liipaisin, jossa on tarkat uritukset positiivisen, liukumattoman sormikontaktin varmistamiseksi.
Saatavilla kiinteä tai luurankomainen shoe, molemmissa yliliikkumisen säätöruuvi ja kuusioavain sisältyvät.
Kiinteä liipaisin shoe on saatavilla Short ja Medium pituuksissa, Custom mallissa luurankomainen shoe ja erittäin leveä liipaisin bow lisävahvuuden takaamiseksi.
Made in USA
USA:n vientiluvan tyyppi: 0A501.c
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Tuotenro: 100003270 NIGHTHAWK CUSTOM CUSTOM TRIGGER Valmistajan tuotenumero: SP0463080683000641 Sama korkealaatuinen kilpatason liipaisin, jonka Nighthawk asentaa kaikkiin räätälöityihin pistooleihinsa. Valittavissa kiinteä tai luurankomainen shoe. Kaikissa malleissa on tarkat uritukset pinnassa positiivisen, liukumattoman sormikontaktin varmistamiseksi, mutta ei teräviä reunoja sormityynyn hankaamiseksi. Yliliikkumisen säätöruuvi ja kuusioavain myös sisältyvät. Kiinteä liipaisin shoe on saatavilla Short ja Medium pituuksissa. Custom mallissa on luurankomainen shoe ja erittäin leveä liipaisin bow lisävahvuuden takaamiseksi.
54.9EUR254,90 €
*
Toimitusaika noin 2-4 viikkoa. 2 kpl. USA:n varastossa
Tuotenro: 100003272 NIGHTHAWK CUSTOM SOLID TRIGGER, MEDIUM Valmistajan tuotenumero: SP0462080683001662 Sama korkealaatuinen kilpatason liipaisin, jonka Nighthawk asentaa kaikkiin räätälöityihin pistooleihinsa. Valittavissa kiinteä tai luurankomainen shoe. Kaikissa malleissa on tarkat uritukset pinnassa positiivisen, liukumattoman sormikontaktin varmistamiseksi, mutta ei teräviä reunoja sormityynyn hankaamiseksi. Yliliikkumisen säätöruuvi ja kuusioavain myös sisältyvät. Kiinteä liipaisin shoe on saatavilla Short ja Medium pituuksissa. Custom mallissa on luurankomainen shoe ja erittäin leveä liipaisin bow lisävahvuuden takaamiseksi.
54.9EUR054,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Sama korkealaatuinen kilpatason liipaisin, jonka Nighthawk asentaa kaikkiin räätälöityihin pistooleihinsa. Valittavissa kiinteä tai luurankomainen shoe. Kaikissa malleissa on tarkat uritukset pinnassa positiivisen, liukumattoman sormikontaktin varmistamiseksi, mutta ei teräviä reunoja sormityynyn hankaamiseksi. Yliliikkumisen säätöruuvi ja kuusioavain myös sisältyvät. Kiinteä liipaisin shoe on saatavilla Short ja Medium pituuksissa. Custom mallissa on luurankomainen shoe ja erittäin leveä liipaisin bow lisävahvuuden takaamiseksi.
Asiakasarviot: NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 11
Arvioiden keskiarvo: 4,8
Stock look, Premium Quality.(17.2.2011)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(22.1.2014)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(9.11.2009)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(14.3.2010)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(25.10.2010)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(20.4.2011)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(14.7.2011)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(18.1.2013)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(27.4.2010)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(25.5.2011)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(12.6.2011)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.