Korisi on tyhjä.

Ostoskori

Apu ja yhteydenotto

Ilmainen toimitus yli 250€ perustoimituksille

100:n päivän palautusoikeus

Uutiskirje

Tarjoukset

Yli 300 000 asiakasta - kiitämme teitä!

4,93/5 "Erittäin hyvä" (1400+ arvostelua)

Yli 40 000 tuotetta metsästykseen ja ammuntaan

SINCLAIR INTERNATIONAL
SINCLAIR RIMFIRE GUIDES FOR 22 LONG RIFLE

749002613

We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.

Lisää...

Meillä on laaja valikoima puhdistusvarren ohjaimia, joita valmistamme suosittuja tarkkuus-/tuhoeläinrimfire-kivääreitä varten, ja lisäämme jatkuvasti uusia malleja valikoimaamme. Rimfire-ohjaimissa ei voi olla O-rengasta niiden mittojen vuoksi, joita käsittelemme. Puhdistusvarren ohjaimien valmistaminen rimfire-kivääreille, jotta voit puhdistaa aseen perästä käsin, on hieman monimutkaisempaa johtuen tieltä olevista heittimistä ja liipaisinosista. Kaikki rimfire-ohjaimemme hyväksyvät Sinclair Solvent Ports -liuotinporttimme, lukuun ottamatta Anschutz Model 54 -ohjainta. Ei sisällä integroitua liuotinporttia.

Lisää...

Asiakasarviot: SINCLAIR INTERNATIONAL ANSCHUTZ MODEL 64 RIMFIRE ROD GUIDE

Arvioiden lukumäärä: 10
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 3,5

Nice guide (21.4.2011)

Fits nicely in my savage mark II

Savage Mark 1 (27.2.2012)

Works also well for the single shot Savage Mark 1

Savage Mark II TR (3.7.2014)

I bought this thinking it would fit my Savage Mark II TR, it did not. It is possible I can modify/file it to work at some point, but that is not the point. It is too tight to go all the way in. I did not think there was any differences between the the different mark II receivers... figured they were all the same. There may or may not be. But I know this does not fit in a Savage Mark II TR. Booo

It works on Savage Mark I FVT (9.6.2016)

I have a new Savage FVT for teaching the Boy Scout Merit Badge Program. I needed a bore guide and ordered this one. It fits great, you just need to pull the trigger to get it all the way in.

Doesn't fit the Savage Mark II (11.5.2017)

I should have read the reviews first. I bought this for my Savage Mark II BTV and it doesn't fit as another reviewer has said.

I plan on keeping it to see if it can be modified but it doesn't work as is. The diameter is correct but it gets hung up on something, I believe the ejector but haven't had time to look as yet.

Not sure what savage rifles this thing is supposed to fit but certainly not the Mark II

REALLY DISSAPONTED!!!!!!!!!!!!!!!!!! (16.10.2010)

The rod guide is so tight in the action that I cannot get it seated against the breech. The bottom is completely open, so that it can clear the fixed portion of the feed ramp. This would allow solvent to run into the magazine well and stock.
The "protection" provided for the chamber against "cleaning rod damage" is completely offset by the fact I HAD TO BEAT IT OUT OF THE ACTION WITH A BRASS DRIFT.

Great Product (24.3.2012)

Makes Cleaning a Pleasure, as ALL SINCLAIR Product. work Great

Works fine with CZ455 (8.8.2011)

I wasn't sure if this product will be useful on a CZ455 due to the protruding ejector that can scratch your stainless steel rod. Given several forums discussion, I went anyway purchasing it. On my CZ455 .22lr, I use this bore guide along with a .17mm rod. It works perfectly.

Works, but could be better (5.2.2012)

Works fine on my CZ452 varmint using a .17 cal. Dewie coated rod & using a thread adapter & a .22 cal. jag or brush. But, I have to hold the guide from comming out when I pull the rod out, but, I can live with that.

Works like a charm (5.12.2013)

I bought this to see if it would fit my Remington model 510 Targetmaster after talking to a representative from Brownell's. It fits perfectly, slips right into the space available, and works great. And as usual, customer service at Brownell's was awesome. The rep looked up both the model 504 and 510 to compare their designs, and was very honest and helpful. Another great buy from Brownell's/Sinclair.

Lue 10 arvostelua lisää brownells.com sivustolla

19.9 29.9 13 EUR

Tuotenro: 749002613
SINCLAIR INTERNATIONAL ANSCHUTZ MODEL 64 RIMFIRE ROD GUIDE Meillä on laaja valikoima puhdistusvarren ohjaimia, joita valmistamme suosittuja tarkkuus-/tuhoeläinrimfire-kivääreitä varten, ja lisäämme jatkuvasti uusia malleja valikoimaamme. Rimfire-ohjaimissa ei voi olla O-rengasta niiden mittojen vuoksi, joita käsittelemme. Puhdistusvarren ohjaimien valmistaminen rimfire-kivääreille, jotta voit puhdistaa aseen perästä käsin, on hieman monimutkaisempaa johtuen tieltä olevista heittimistä ja liipaisinosista. Kaikki rimfire-ohjaimemme hyväksyvät Sinclair Solvent Ports -liuotinporttimme, lukuun ottamatta Anschutz Model 54 -ohjainta. Ei sisällä integroitua liuotinporttia.

25.9 EUR 0 25,90 € *

Ilmoita saatavuudesta

Ei saatavilla.

Ominaisuudet: Aktioon sopivuus: Anschutz Model 64 (22LR)

SINCLAIR INTERNATIONAL SINCLAIR RIMFIRE GUIDES FOR 22 LONG RIFLE

Asiakasarviot: SINCLAIR INTERNATIONAL ANSCHUTZ MODEL 64 RIMFIRE ROD GUIDE

Top takeaways

Ominaisuudet

Tuotekuvaus

Asiakasarviot: SINCLAIR INTERNATIONAL ANSCHUTZ MODEL 64 RIMFIRE ROD GUIDE

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

SINCLAIR INTERNATIONAL
SINCLAIR RIMFIRE GUIDES FOR 22 LONG RIFLE