Yli 300 000 asiakasta - kiitämme teitä!

Yli 40 000 tuotetta metsästykseen ja ammuntaan

793811765946 430105343
The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2"x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system. With the clamp style design on the SMTC QUAD, timing the comp is simple including a secure and tight fitment. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of this QUAD pairs aesthetically well with most OEM and aftermarket slides on the market including full size pistols. Made from S45C steel with HRC40-45 heat treatment and a black oxide finish, the Strike Micro Threaded Comp – QUAD offers a smaller threaded barrel compensator option for your pistol with SI style. Package Contents: x1 Strike Micro Threaded Comp – QUAD x1 Set screw [M4x12mm] x1 Torx tool [T20] x1 Waning card Product Features: Micro compensator that can work with just about any size slide using threaded barrel (1/2”-28 TPI) Built-in anti-rotation system using front tip of guide rod (when applicable) Wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise Secure tight fitment with easy timing clamp style design SI styling which matches most OEM and aftermarket slides on the market Designed to work with micro, sub-compact, compact and full size pistols Made from S45C steel with HRC40-45 heat treatment and black oxide finish COMPATIBILITY: With any 1/2”x28 TPI threaded barrel Calibers: 9mm and .357 SIG NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systems WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator Torque: Set screw to exactly 40 in/lbs (4.5 Nm) NOTE: Recommended to re-apply Loctite® Threadlocker Blue 243® anytime set screw is removed before reinstalling -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
124.9 124.9 1 EUR
Tuotenro: 430105343
STRIKE INDUSTRIES MICRO THREADED BARREL COMP-QUAD
Valmistajan tuotenumero: SI-MC-QUAD 793811765946
124.9 EUR 3 124,90 € *
Toimitusaika noin 2-4 viikkoa.
3 kpl. USA:n varastossa

Ominaisuudet

Toimituksen paino: 0,086kg Toimituksen korkeus: 36mm Toimituksen leveys: 38mm Toimituksen pituus: 89mm UPC : 793811765946


Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi




Tutustu STRIKE INDUSTRIES MICRO THREADED BARREL COMP-QUAD -kompensaattoriin, joka parantaa tarkkuutta ja vähentää rekyllyä. ✨

The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2"x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system. With the clamp style design on the SMTC QUAD, timing the comp is simple including a secure and tight fitment. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of this QUAD pairs aesthetically well with most OEM and aftermarket slides on the market including full size pistols. Made from S45C steel with HRC40-45 heat treatment and a black oxide finish, the Strike Micro Threaded Comp – QUAD offers a smaller threaded barrel compensator option for your pistol with SI style. Package Contents: x1 Strike Micro Threaded Comp – QUAD x1 Set screw [M4x12mm] x1 Torx tool [T20] x1 Waning card Product Features: Micro compensator that can work with just about any size slide using threaded barrel (1/2”-28 TPI) Built-in anti-rotation system using front tip of guide rod (when applicable) Wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise Secure tight fitment with easy timing clamp style design SI styling which matches most OEM and aftermarket slides on the market Designed to work with micro, sub-compact, compact and full size pistols Made from S45C steel with HRC40-45 heat treatment and black oxide finish COMPATIBILITY: With any 1/2”x28 TPI threaded barrel Calibers: 9mm and .357 SIG NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systems WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator Torque: Set screw to exactly 40 in/lbs (4.5 Nm) NOTE: Recommended to re-apply Loctite® Threadlocker Blue 243® anytime set screw is removed before reinstalling -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Takaisin alkuun