Korisi on tyhjä.

Ostoskori

Apu ja yhteydenotto

Ilmainen toimitus yli 250€ perustoimituksille

100:n päivän palautusoikeus

Uutiskirje

Tarjoukset

Yli 300 000 asiakasta - kiitämme teitä!

4,93/5 "Erittäin hyvä" (1400+ arvostelua)

Yli 40 000 tuotetta metsästykseen ja ammuntaan

BROWNELLS
PIIPUNSUUN VIISTELEIKKURIEN OHJURIT

050806018099 080686375

Centers Cutters For Accurate Work

Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

	Steel One Caliber Set		45° Cutter & Steel Pilot
	Brass One Caliber Set		45° Cutter & Brass Pilot
	90° Cutter & Steel Pilot		Chamfering & Facing Combo Sets
	90° Cutter & Brass Pilot		Brass Pilot Only

SPECS: Hardened steel. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917.

Lisää...

Keskusten leikkurit tarkkaan työskentelyyn

BROWNELLS ohjurit piipunsuun viisteen leikkureihin. Valikoimissa paljon eri kaliipereja

Valitse seuraavat muut kivääri/pistooli kuono sylinterin edessä & viisteiden työkaluja.

	teräs yksi kaliiperi asettaa		45 ° leikkuri & teräksen Pilot
	messinki yksi kaliiperi asettaa		45 ° leikkuri & messinki Pilot
	90 ° leikkuri & teräksen Pilot		viisteiden & päin Combo asetetaan
	90 ° leikkuri & messinki Pilot		messinki Pilot vain

Tiedot: karkaistu teräs. 1¼"(3,2 cm) pitkä. 45 AKT pilotit - 45 AKT-1 sopii S & W malli 25 & 625. 45 AKT-2 sopii Colt 1917.

Lisää...

Asiakasarviot: BROWNELLS STEEL PILOT FOR .375 MUZZLE

Arvioiden lukumäärä: 10
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 4,1

Too big for S&W 625 (15.9.2010)

Larger then the 45-1 and that needs to be fit to work with the 625 cylinder

Almost a perfict fit (15.9.2010)

This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.

Too small for S&W 610 (15.9.2010)

Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.

Yes this works with Mosins (3.8.2013)

I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.

It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.

Good quality product (13.11.2009)

The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.

This fits Mosin Nagant Rifles (10.8.2013)

Good quality pilot, no wobble when used in the proper size bore.

I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.

If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.

Good quality product. (6.11.2009)

The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.

Good quality product. (6.11.2009)

The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.

Good quality product. (8.11.2009)

The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.

Good quality product (13.11.2009)

The pilot has the look of good quality. It also fits both the muzzle and cutter real well.

Lue 10 arvostelua lisää brownells.com sivustolla

33.9 42.9 44 EUR

Tuotenro: 080686375
BROWNELLS STEEL PILOT FOR .375 MUZZLE 050806018099 BROWNELLS ohjurit piipunsuun viisteen leikkureihin. Valikoimissa paljon eri kaliipereja BROWNELLS ohjurit piipunsuun viisteen leikkureihin. Valikoimissa paljon eri kaliipereja

34.9 EUR 1 34,90 € *

Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa

Ominaisuudet: Kaliiperi: 375 Caliber (.375) Materiaali: Steel

BROWNELLS PIIPUNSUUN VIISTELEIKKURIEN OHJURIT

Asiakasarviot: BROWNELLS STEEL PILOT FOR .375 MUZZLE

Ominaisuudet

Tuotekuvaus

Asiakasarviot: BROWNELLS STEEL PILOT FOR .375 MUZZLE

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

BROWNELLS
PIIPUNSUUN VIISTELEIKKURIEN OHJURIT