Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Lisää...
Vähentää liipaisimen vedon, parantaa tarkkuutta
Kolme, tehoa alentavaa jousia aseen liipaisun tuntuman säätämiseen ja pehmentämiseen. Sopii uudempiin P220, P226 ja P229 -malleihin, jotka käyttävät lyhyttä pääjousta muovisella, vasaran jousten alustan insertillä. Sisältää yhden kunkin 17, 18 ja 19 paunan tehoa alentavista pääjousista. P220 tehtaan jousi on 22 paunaa. P226 ja P229 tehtaan jousi on 24 paunaa.
Lisää...
Asiakasarviot: WOLFF SIG MAINSPRING KIT #32356
Arvioiden lukumäärä: 4
Arvostelut brownells.com sivustolla: 4
Arvioiden keskiarvo: 4,5
Wolff Sig Mainspring(11.7.2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23.3.2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(6.5.2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21.5.2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.
Tuotenro: 969000021 WOLFF SIG MAINSPRING KIT #32356 Valmistajan tuotenumero: 32356 Kolme, tehoa alentavaa jousia aseen liipaisun tuntuman säätämiseen ja pehmentämiseen. Sopii uudempiin P220, P226 ja P229 -malleihin, jotka käyttävät lyhyttä pääjousta muovisella, vasaran jousten alustan insertillä. Sisältää yhden kunkin 17, 18 ja 19 paunan tehoa alentavista pääjousista. P220 tehtaan jousi on 22 paunaa. P226 ja P229 tehtaan jousi on 24 paunaa.
29.9EUR1729,90 €
*
Toimitusaika noin 2-4 viikkoa. Yli 10 kpl. USA:n varastossa
Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Lisää...
Vähentää liipaisimen vedon, parantaa tarkkuutta
Kolme, tehoa alentavaa jousia aseen liipaisun tuntuman säätämiseen ja pehmentämiseen. Sopii uudempiin P220, P226 ja P229 -malleihin, jotka käyttävät lyhyttä pääjousta muovisella, vasaran jousten alustan insertillä. Sisältää yhden kunkin 17, 18 ja 19 paunan tehoa alentavista pääjousista. P220 tehtaan jousi on 22 paunaa. P226 ja P229 tehtaan jousi on 24 paunaa.
Lisää...
Asiakasarviot: WOLFF SIG MAINSPRING KIT #32356
Arvioiden lukumäärä: 4
Arvostelut brownells.com sivustolla: 4
Arvioiden keskiarvo: 4,5
Wolff Sig Mainspring(11.7.2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23.3.2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(6.5.2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21.5.2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.