Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. Unique cap design includes both ratchet and ball/spring type detent systems for no-hassle installation. Includes a ¾" long, wood screw swivel stud for the buttstock. Sling loops not included. Installation requires drilling of buttstock.
SPECS: Steel, black, matte finish. Includes magazine cap with swivel stud, wood screw stud w/black spacer, and instructions. Models available for Remington 870/1100/11-87/11-96, 12 ga. only and Mossberg 500 and Maverick 88, 20 ga. & 12 ga. Moss/Mav includes spanner wrench.
Lisää...
Helppo asentaa välittömään hihnan kiinnitykseen
Koneistettu teräksinen lippaan kansi, jossa on sisäänrakennettu 360° pyörivä tappi, helpottaa Remington-haulikon muuntamista kantohihnan käyttöön. Ainutlaatuinen kannen muotoilu sisältää sekä räikkä- että pallon/kevään tyyppiset uritusjärjestelmät vaivattomaan asennukseen. Pakkaukseen sisältyy ¾" pitkä puuruuvi tappi perälevyyn. Kantohihnan lenkit eivät sisälly. Asennus vaatii perälevyn poraamista.
TEKNISET TIEDOT: Teräs, musta, mattapinta. Pakkaukseen sisältyy lippaan kansi pyörivällä tappilla, puuruuvi tappi mustalla välilevyllä ja ohjeet. Malleja saatavilla Remington 870/1100/11-87/11-96, vain 12 kaliberille ja Mossberg 500 sekä Maverick 88, 20 ja 12 kaliberille. Moss/Mav sisältää jakoavaimen.
Lisää...
Asiakasarviot: OUTDOOR CONNECTION MOSS/MAV MAGAZINE CAP W/SWIVEL BASE
Arvioiden lukumäärä: 4
Arvostelut brownells.com sivustolla: 4
Arvioiden keskiarvo: 3
This is how Mossberg should've done it.(22.1.2016)
Stud truly rotates in take-down screw, big improvement over OEM. Works on 20 gauge guns as well. Installation is easy and takes 2 minutes with the included tool.
Perfect solution for Maverick 88(29.3.2018)
For a Maverick 88, this Outdoor Connection brand is the way to go. I tried Uncle Mike's 1531-2 parts, but the tiny screw does NOT stay in the takedown bolt, even with superglue, and even if it did, it would be hard to line it up evenly, as it is meant to stay in a static position and not spin 360 degrees. The Outdoor Connection brand however, is perfect. The replacement takedown bolt with integrated swivel stud fits perfectly and easily onto my Maverick 88. The silver cylinder included in the pack is a very handy tool for unscrewing the factory slotted retainer ring (no retainer ring included in this pack, just re-use the one your shotgun already has). Highly recommended if you want to put a sling on your Maverick 88. And unlike the Uncle Mike's 1531-2, this one DOES allow your sling 360 degrees of free rotation where it attaches to the magazine tube. Shipping was faster than expected (ordered on a Sunday, arrived 4 days later on Thursday even after choosing the cheapest, slowest shipping option), THANKS BROWNELLS & OUTDOOR CONNECTION!!
Won't screw down!(17.10.2015)
It doesn't fit!
The magazine cap wouldn't screw on. Yeah(16.2.2017)
The magazine cap wouldn't screw on my gun. Hard to believe isn't it?
I kept tying to get it to go on, but the cap had defective threads. Two other 870 magazine caps that I had screwed on to this gun just fine. But the cap that came with the swivel kit from Outdoor Connection would not go one at all.
I was worried that this defective magazine cap would ruin the threads on the magazine tube of my gun, so I tossed it.
Save yourself a lot of time and trouble, DON'T BUY THIS.
Tuotenro: 683000015 OUTDOOR CONNECTION MOSS/MAV MAGAZINE CAP W/SWIVEL BASE Valmistajan tuotenumero: TSC-79544051057795449 Koneistettu teräksinen lippaan kansi, jossa on sisäänrakennettu 360° pyörivä tappi, helpottaa Remington-haulikon muuntamista kantohihnan käyttöön. Ainutlaatuinen kannen muotoilu sisältää sekä räikkä- että pallon/kevään tyyppiset uritusjärjestelmät vaivattomaan asennukseen. Pakkaukseen sisältyy ¾" pitkä puuruuvi tappi perälevyyn. Kantohihnan lenkit eivät sisälly. Asennus vaatii perälevyn poraamista.
Tuotenro: 683000006 OUTDOOR CONNECTION REM MAGAZINE CAP W/SWIVEL BASE Valmistajan tuotenumero: TSC-79523051057795234 Koneistettu teräksinen lippaan kansi, jossa on sisäänrakennettu 360° pyörivä tappi, helpottaa Remington-haulikon muuntamista kantohihnan käyttöön. Ainutlaatuinen kannen muotoilu sisältää sekä räikkä- että pallon/kevään tyyppiset uritusjärjestelmät vaivattomaan asennukseen. Pakkaukseen sisältyy ¾" pitkä puuruuvi tappi perälevyyn. Kantohihnan lenkit eivät sisälly. Asennus vaatii perälevyn poraamista.
33.9EUR033,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. Unique cap design includes both ratchet and ball/spring type detent systems for no-hassle installation. Includes a ¾" long, wood screw swivel stud for the buttstock. Sling loops not included. Installation requires drilling of buttstock.
SPECS: Steel, black, matte finish. Includes magazine cap with swivel stud, wood screw stud w/black spacer, and instructions. Models available for Remington 870/1100/11-87/11-96, 12 ga. only and Mossberg 500 and Maverick 88, 20 ga. & 12 ga. Moss/Mav includes spanner wrench.
Lisää...
Helppo asentaa välittömään hihnan kiinnitykseen
Koneistettu teräksinen lippaan kansi, jossa on sisäänrakennettu 360° pyörivä tappi, helpottaa Remington-haulikon muuntamista kantohihnan käyttöön. Ainutlaatuinen kannen muotoilu sisältää sekä räikkä- että pallon/kevään tyyppiset uritusjärjestelmät vaivattomaan asennukseen. Pakkaukseen sisältyy ¾" pitkä puuruuvi tappi perälevyyn. Kantohihnan lenkit eivät sisälly. Asennus vaatii perälevyn poraamista.
TEKNISET TIEDOT: Teräs, musta, mattapinta. Pakkaukseen sisältyy lippaan kansi pyörivällä tappilla, puuruuvi tappi mustalla välilevyllä ja ohjeet. Malleja saatavilla Remington 870/1100/11-87/11-96, vain 12 kaliberille ja Mossberg 500 sekä Maverick 88, 20 ja 12 kaliberille. Moss/Mav sisältää jakoavaimen.
Lisää...
Asiakasarviot: OUTDOOR CONNECTION MOSS/MAV MAGAZINE CAP W/SWIVEL BASE
Arvioiden lukumäärä: 4
Arvostelut brownells.com sivustolla: 4
Arvioiden keskiarvo: 3
This is how Mossberg should've done it.(22.1.2016)
Stud truly rotates in take-down screw, big improvement over OEM. Works on 20 gauge guns as well. Installation is easy and takes 2 minutes with the included tool.
Perfect solution for Maverick 88(29.3.2018)
For a Maverick 88, this Outdoor Connection brand is the way to go. I tried Uncle Mike's 1531-2 parts, but the tiny screw does NOT stay in the takedown bolt, even with superglue, and even if it did, it would be hard to line it up evenly, as it is meant to stay in a static position and not spin 360 degrees. The Outdoor Connection brand however, is perfect. The replacement takedown bolt with integrated swivel stud fits perfectly and easily onto my Maverick 88. The silver cylinder included in the pack is a very handy tool for unscrewing the factory slotted retainer ring (no retainer ring included in this pack, just re-use the one your shotgun already has). Highly recommended if you want to put a sling on your Maverick 88. And unlike the Uncle Mike's 1531-2, this one DOES allow your sling 360 degrees of free rotation where it attaches to the magazine tube. Shipping was faster than expected (ordered on a Sunday, arrived 4 days later on Thursday even after choosing the cheapest, slowest shipping option), THANKS BROWNELLS & OUTDOOR CONNECTION!!
Won't screw down!(17.10.2015)
It doesn't fit!
The magazine cap wouldn't screw on. Yeah(16.2.2017)
The magazine cap wouldn't screw on my gun. Hard to believe isn't it?
I kept tying to get it to go on, but the cap had defective threads. Two other 870 magazine caps that I had screwed on to this gun just fine. But the cap that came with the swivel kit from Outdoor Connection would not go one at all.
I was worried that this defective magazine cap would ruin the threads on the magazine tube of my gun, so I tossed it.
Save yourself a lot of time and trouble, DON'T BUY THIS.