Dial Caliper Body for your Modular Headspace Comparator assembly. Now available with 2 mounting configurations: “Centered” for normal use, “Offset” for use with Hornady COAL Tools. ***Body is required to use Bullet and Headspace Inserts*** This is the body only for the Modular Headspace Comparator tool. You must purchase the body for the Modular Headspace Comparator inserts to work. Available in two configurations. Standard: The longest of the two configurations, works with loaded ammunition up to 338 Lapua Magnum with solid turned bullets. Short: The shortest body of the two configurations. More compact when the customer wants to dedicate a body for measuring fired brass or bullets only. Made from 6061 Aluminum made in the U.S.A. these bodies clamp onto your dial calibers allowing the Headspace and Bullet inserts to be changed quickly with the use of any tools. Both Standard and Short Modular Headspace Comparator Bodies have two clamping configurations when mounting to your dial calipers. Configuration “C”: Centered With the 10/32 Thumb Screw mounted on the bottom side with a “C” means that the Modular Headspace Comparator Body will be centered on the dial calipers. This is standard for all normal uses. Configuration “O”: Offset With the 10/32 Thumb Screw mounted on the bottom side with a “O” means that the Modular Headspace Comparator Body will be offset on the dial calipers. When using the Hornady COAL measuring tools, the Modular Headspace Comparator body must be offset on the dial calipers in order for the Hornady tool to be properly aligned with the Modular Headspace Comparator assembly.
Dial Caliper -runko Modular Headspace Comparator -kokoonpanoa varten. Nyt saatavilla kahdella kiinnityskonfiguraatiolla: "Keskitetty" normaaliin käyttöön, "Sivuttainen" käytettäväksi Hornady COAL -työkalujen kanssa. ***Runko on tarpeen Bullet- ja Headspace-insertien käyttöön*** Tämä on vain runko Modular Headspace Comparator -työkalulle. Sinun on ostettava runko, jotta Modular Headspace Comparator -insertit toimisivat. Saatavilla kahdessa konfiguraatiossa. Standardi: Pitkämpi kahdesta konfiguraatiosta, toimii ladatulla ammuksella jopa 338 Lapua Magnum -kaliiperilla kiinteillä käännetyillä kuulailla. Lyhyt: Lyhyempi runko kahdesta konfiguraatiosta. Kompaktimpi, kun asiakas haluaa omistaa rungon vain ammuttujen messinkien tai kuulan mittaamiseen. Valmistettu 6061-alumiinista, joka on valmistettu Yhdysvalloissa, nämä rungot kiinnittyvät dial-calipereihisi, jolloin Headspace- ja Bullet-insertit voidaan vaihtaa nopeasti ilman työkaluja. Sekä Standard- että Lyhyet Modular Headspace Comparator -rangot sisältävät kaksi kiinnityskonfiguraatiota, kun ne asennetaan dial-calipereihisi. Konfiguraatio "C": Keskitetty 10/32 -ruuvin ollessa kiinnitetty alapuolelle "C" tarkoittaa, että Modular Headspace Comparator -runko on keskitetty dial-calipereihin. Tämä on normaali kaikissa tavallisissa käytöissä. Konfiguraatio "O": Sivuttainen 10/32 -ruuvin ollessa kiinnitetty alapuolelle "O" tarkoittaa, että Modular Headspace Comparator -runko on sivuttain dial-calipereissa. Käytettäessä Hornady COAL -mittaustyökaluja, Modular Headspace Comparator -runko on oltava sivuttain dial-calipereissa, jotta Hornady-työkalu voidaan kohdistaa oikein Modular Headspace Comparator -kokoonpanoon.