Replaces Factory Sear For A Light, Clean-Breaking Trigger Pull
This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel. Fits Ruger® MKII™, MKIII™ and 22/45™.
Tämä erityisesti suunniteltu liipaisinvarsi tarjoaa ampujalle lyhyemmän, nopeamman ja puhtaamman liipaisimen vedon. Liipaisinvarsi on langalla EDM-leikattu karkaistusta A2-työkaluteräksestä. Sopii Ruger® MKII™, MKIII™ ja 22/45™ -malleihin.
Lisää...
Asiakasarviot: VOLQUARTSEN RUGER® MARK II™/MARK III™ TARGET SEAR
Arvioiden lukumäärä: 12
Arvostelut brownells.com sivustolla: 12
Arvioiden keskiarvo: 4,1
Did not fit in my MK I(17.11.2009)
Not sure why Brownells says that this works with the Mk I. It doesn't. Even Volquartsen's website says Mark II or III only....
super item - not for Mark I(10.3.2010)
Installs as directions indicate. Works great. Much better trigger pull. Have a Mark III DOES NOT WORK IN MK I
It will work on MK I Rugers(25.3.2010)
On most MKI's the [...] will work but on others fitting is required with the safety which is why we do not sell this part as a drop in item for the MKI.
Volquartsen sear for Mark II(23.5.2011)
This sear is slightly taller than the original and would not allow the gun to be cocked.
Sweet!(2.5.2013)
I installed this sear in a MKIII target model. The difference in trigger pull is amazing. The release is very crisp. Installation for this and the Volquortsen trigger took about 45 minutes including a fair amount of associated cleaning, but I am familiar with the workings of these pistols. This sear is the single biggest improvement you can make to a MKII or MKIII Ruger.
Oh man....(25.10.2013)
This sear totally cuts the trigger pull in half! I love it. Makes the gun even more fun to shoot. I also added a Tandemkross hammer bushing and between the two, I have the most consistent trigger pull ever. I highly recommend the Volquartsen sear for any MKIII or 22/45 owner.
Work on Ruger Standard Pistol(30.4.2014)
Installed this sear and the Volquartsen stainless trigger easily on my Ruger Standard Pistol(pre Mark I)without any modifications. What a difference it made. Cut the trigger pull in half and no more creep. Very smooth and crisp trigger now. Best investment for this pistol.
Very Nice!!!!(9.5.2014)
I installed this sear and also the company's SS target trigger. My original trigger pull was a heavy and grainy 4&1/4Lbs. This Sear and trigger combo brought it down to a very nice crisp and clean 1&3/4Lbs.I highly recommend it! FYI YouTube has videos that keep you outta trouble when disassembling and installing these parts.
Good, but not great(12.8.2014)
My Ruger Mark III 22/45 is well-tuned, well-cared for, and has many thousands of rounds through it. The factory sear and hammer provided a crisp, repetitive three-pound release. While I have been quite satisfied with it, I installed the Volquartsen sear to see if it measured up to the claims I've read in reviews.
The VQ sear dropped the release to a fairly repetitive 1.6 pounds, but it feels a little mushy. I'll pass final judgement after a thousand rounds or so. But, at this point I'm not going to bother installing a VQ sear in my Mark III Target, which also has a crisp three-pound release. I'm perfectly happy with it.
Great Addition to those needing a Sear(3.9.2016)
I replaced the factory Sear in my MkIII TARGET along with other modifications. The Factory trigger had a lot of take up and over travel as well as creep and a heavy, gritty break. So when I installed a new flat Faced Trigger, I decided to do the sear as well. No Fitting is required in a Mk II or Mk III, and it will not fit a Mk I. BTW, This sear would have a higher rating if the three reviews that talk about attempting to install in a MKI were dropped. I cannot imagine that installing this sear, by itself, would not make a major difference. I Installed with other modifications, the results are spectacular. I know that now, My MkIII trigger has no perceptible creep and breaks like a glass rod. So this was a major improvement over the stock sear. Very Pleased.
What a game changer on my Mark II(2.1.2017)
I installed this sear on a 24 year old SS slab sided Ruger Mark II along with a Vq trigger installed 24 years ago it's a game changer , the trigger breaks clean with no creep . I installed a pre set , set screw in the trigger guard when I added the trigger 24 years ago . This pistol has a trigger pull weight of 1 1/4 to 1 1/2 lbs . The triggers are the old style SS kind . Should have done the complete pistol years ago .
If your into shooting USPSA steel plates add the sear, trigger and you'll be set .
DoubleTap
Should be the first upgrade you do!(16.2.2017)
Loved my new mkiii 22/45, everything but the trigger that is. After reading some reviews I ordered the volquartsen target sear. Install wasn't too bad after a few YouTube videos. The results are amazing! The trigger breaks so much cleaner and twice as easy as before just like it should.
Tuotenro: 930000050 VOLQUARTSEN RUGER® MARK II™/MARK III™ TARGET SEAR Valmistajan tuotenumero: VC2TS810162011680 Tämä erityisesti suunniteltu liipaisinvarsi tarjoaa ampujalle lyhyemmän, nopeamman ja puhtaamman liipaisimen vedon. Liipaisinvarsi on langalla EDM-leikattu karkaistusta A2-työkaluteräksestä. Sopii Ruger® MKII™, MKIII™ ja 22/45™ -malleihin.
59.9EUR559,90 €
*
Toimitusaika noin 2-4 viikkoa. 5 kpl. USA:n varastossa
Malli:
Mark I,Mark II
Valmistaja:
Ruger
Toimituksen paino: 0,009kgToimituksen korkeus: 10mmToimituksen leveys: 71mmToimituksen pituus: 86mm
UPC
: 810162011680
Tuotekuvaus
Made in USA
USA:n vientiluvan tyyppi: 0A501.c
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Paranna ampumiskokemustasi RUGER® MARK II™/MARK III™ TARGET SEAR: lyhyempi ja puhtaampi liipaisinvarsi. ✨ Sopii useisiin malleihin!
Replaces Factory Sear For A Light, Clean-Breaking Trigger Pull
This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel. Fits Ruger® MKII™, MKIII™ and 22/45™.
Tämä erityisesti suunniteltu liipaisinvarsi tarjoaa ampujalle lyhyemmän, nopeamman ja puhtaamman liipaisimen vedon. Liipaisinvarsi on langalla EDM-leikattu karkaistusta A2-työkaluteräksestä. Sopii Ruger® MKII™, MKIII™ ja 22/45™ -malleihin.
Lisää...
Asiakasarviot: VOLQUARTSEN RUGER® MARK II™/MARK III™ TARGET SEAR
Arvioiden lukumäärä: 12
Arvostelut brownells.com sivustolla: 12
Arvioiden keskiarvo: 4,1
Did not fit in my MK I(17.11.2009)
Not sure why Brownells says that this works with the Mk I. It doesn't. Even Volquartsen's website says Mark II or III only....
super item - not for Mark I(10.3.2010)
Installs as directions indicate. Works great. Much better trigger pull. Have a Mark III DOES NOT WORK IN MK I
It will work on MK I Rugers(25.3.2010)
On most MKI's the [...] will work but on others fitting is required with the safety which is why we do not sell this part as a drop in item for the MKI.
Volquartsen sear for Mark II(23.5.2011)
This sear is slightly taller than the original and would not allow the gun to be cocked.
Sweet!(2.5.2013)
I installed this sear in a MKIII target model. The difference in trigger pull is amazing. The release is very crisp. Installation for this and the Volquortsen trigger took about 45 minutes including a fair amount of associated cleaning, but I am familiar with the workings of these pistols. This sear is the single biggest improvement you can make to a MKII or MKIII Ruger.
Oh man....(25.10.2013)
This sear totally cuts the trigger pull in half! I love it. Makes the gun even more fun to shoot. I also added a Tandemkross hammer bushing and between the two, I have the most consistent trigger pull ever. I highly recommend the Volquartsen sear for any MKIII or 22/45 owner.
Work on Ruger Standard Pistol(30.4.2014)
Installed this sear and the Volquartsen stainless trigger easily on my Ruger Standard Pistol(pre Mark I)without any modifications. What a difference it made. Cut the trigger pull in half and no more creep. Very smooth and crisp trigger now. Best investment for this pistol.
Very Nice!!!!(9.5.2014)
I installed this sear and also the company's SS target trigger. My original trigger pull was a heavy and grainy 4&1/4Lbs. This Sear and trigger combo brought it down to a very nice crisp and clean 1&3/4Lbs.I highly recommend it! FYI YouTube has videos that keep you outta trouble when disassembling and installing these parts.
Good, but not great(12.8.2014)
My Ruger Mark III 22/45 is well-tuned, well-cared for, and has many thousands of rounds through it. The factory sear and hammer provided a crisp, repetitive three-pound release. While I have been quite satisfied with it, I installed the Volquartsen sear to see if it measured up to the claims I've read in reviews.
The VQ sear dropped the release to a fairly repetitive 1.6 pounds, but it feels a little mushy. I'll pass final judgement after a thousand rounds or so. But, at this point I'm not going to bother installing a VQ sear in my Mark III Target, which also has a crisp three-pound release. I'm perfectly happy with it.
Great Addition to those needing a Sear(3.9.2016)
I replaced the factory Sear in my MkIII TARGET along with other modifications. The Factory trigger had a lot of take up and over travel as well as creep and a heavy, gritty break. So when I installed a new flat Faced Trigger, I decided to do the sear as well. No Fitting is required in a Mk II or Mk III, and it will not fit a Mk I. BTW, This sear would have a higher rating if the three reviews that talk about attempting to install in a MKI were dropped. I cannot imagine that installing this sear, by itself, would not make a major difference. I Installed with other modifications, the results are spectacular. I know that now, My MkIII trigger has no perceptible creep and breaks like a glass rod. So this was a major improvement over the stock sear. Very Pleased.
What a game changer on my Mark II(2.1.2017)
I installed this sear on a 24 year old SS slab sided Ruger Mark II along with a Vq trigger installed 24 years ago it's a game changer , the trigger breaks clean with no creep . I installed a pre set , set screw in the trigger guard when I added the trigger 24 years ago . This pistol has a trigger pull weight of 1 1/4 to 1 1/2 lbs . The triggers are the old style SS kind . Should have done the complete pistol years ago .
If your into shooting USPSA steel plates add the sear, trigger and you'll be set .
DoubleTap
Should be the first upgrade you do!(16.2.2017)
Loved my new mkiii 22/45, everything but the trigger that is. After reading some reviews I ordered the volquartsen target sear. Install wasn't too bad after a few YouTube videos. The results are amazing! The trigger breaks so much cleaner and twice as easy as before just like it should.
Apu ja yhteydenotto
(0) 
Uutiskirje
Perinteinen näkymä
Mobiilinäkymä