Improves Accuracy, Functioning; Elimnates Frame Cracking From Recoil
Easy-to-install kit instantly improves cycling, reliability and accuracy without modifying the frame or the slide. Exclusive, injection-molded, polyfiber buffers slip onto the guide rod be- tween the head and spring and keep the slide from hitting the frame. Prevents expensive frame damage and softens the felt recoil of high power competition loads. Full-length guide rod keeps the recoil spring straight for smoother functioning and longer spring life. Together they provide consistent barrel lockup and increased accuracy.
SPECS: Kit includes 416 stainless steel one-piece, full-length guide rod and plug, 6 Shok-Buff washers, 1 light recoil spring, 1 heavy recoil spring, 1 extra power firing pin return spring. Fits 1911 Auto models and calibers listed only.
Lisää...
Parantaa tarkkuutta, toimintaa; Elimnates runko halki rekyyli
Rekyylijousisarjat 1911 Commander ja Government .45ACP pistooleihin. Sarjassa on 6 rekyylibufferia, ohjuripuikko, jäykkä ja kevyt rekyylijousi, sekä iskurin palautusjousi. Helppo asentaa.
Tiedot: Kit sisältää 416 ruostumattomasta teräksestä yksiosainen, täyspitkä opas sauva ja liitin, 6 Shok-harrastaja pesurit, 1 kevyt palautusjousi, 1 Raskas Palautinjousen, 1 lisävoimaa iskuri palautusjousi. Lueteltujen vain sopii 1911 Auto malleja ja calibers.
Lisää...
Asiakasarviot: 1911, Commander, .45 ACP
Arvioiden lukumäärä: 13
Arvostelut brownells.com sivustolla: 13
Arvioiden keskiarvo: 4,5
Doesnt fit(12.5.2012)
Just purchased a new 1911 commander, trying to do some upgrades and these "drop in" upgrades never fit right. The guide for the main spring is toooooo long. I cant get the cap or retainer to swivel over the guide because its about 1/8 to long. Im waiting to be contacted. Hopefully it was just a wrong part mistake as i' m pretty excited about my new gun.
For my ATI 4.25" (18.12.2014)
I had to put it in the lathe and trim a little bit off then chamfer it for a smooth assembly. After a little fitting it took an ATI with a 4" grouping at 15 yards and sloppy recoil into a very nice shooter. Put 5 rounds in the same hole at 20 yards with factory ammunition.
Great product(7.10.2017)
I Installed in my Springfield Mil Spec. It was a dropin installation & really helped with accuracy & reduced recoil.
Easy install, excellent control(31.10.2009)
Installed in less than 5 minutes. Shot before and after install. Noticed a marked difference in recoil and in turn shot placement.
Great value, easy installation!(9.11.2009)
Really tightened up my gun, and grouping improved! You get a lot for the money, with a great company name behind it!
Firestorm 1911 likey(23.12.2010)
Works great in 2 of my 1911 Firestorm Govt. .45 acp
Excellent value(8.1.2012)
Best, most affordable upgrade you can do without a gunsmith. Instantly improves accuracy, reduces recoil, and makes the .45 a pleasure to shoot all day long.
Great drop-in product.(18.1.2012)
Bought this four months ago with 5,000 rounds through it to-date. Really like this product but .... be advised that once installation is complete....you will no-longer be able to just pop your slide off in a few short seconds unless you have thumbs-of-steel. The guide-rod-plug has sharp edges and even after some gentle-stoning it is strongly advised that you use a good barrel bushing wrench so you will save the end of your thumb for another-day !! Functionality of the FLGR is great, recoil is milder with the proper spring selection and it gives me piece-of-mind knowing the recoil spring is properly captured and functioning better than stock setup. Takes more time to reassemble however that's worth the performance-increase. Looks-sweet when the slide is locked back !!!
Worth the money.(29.4.2012)
I picked this kit up at a gun show today for my AMC American Classic II just to see if it made a difference and I would have to say it did. It cycles smoother and seems to be a little more accurate as it keeps everything locked up tighter. It can be a little bit of a pain to put together but nothing too big of a deal. I am happy with it.
great product(2.11.2012)
if you can clean your gun, you can install this part. I bought this mostly to combat frame battering. it seemed to have smoothed my gun up quite a bit, and has notably less muzzle flip. I'd definately buy this again if i had a second 1911.
wc SHOK-BUFF RECOIL SYSTEM(7.12.2012)
EASY INSTALL, EXCELLENT QUALITY, GREAT VALUE, WORKS PERFECTLY
Seems to work , Gun feels tight & smooth(2.5.2014)
Haven't shot the gun yet, feels tight and smooth. Put it in a 68 llama 1911, great fit. Going this weekend to see how it works.
Must Buy for 5in 1911(21.6.2014)
Installing this into your governemnt 1911 is like a pro working over your gun. Just bought a 2nd guide rod kit for my friends P14. Installed my guide rod into the P14 just to check it out, wow what a difference it make for it too. Recommend you lube the rails with high quality bearing grease and work it back and forth a 100 times or so. Did this for my SA GI stainless model and its so smooth I call it my cheap race gun. Take care, Mr. K
Tuotenro: 965064145 1911, Commander, .45 ACP Valmistajan tuotenumero: 64C874218002695Rekyylijousisarjat 1911 Commander ja Government .45ACP pistooleihin. Sarjassa on 6 rekyylibufferia, ohjuripuikko, jäykkä ja kevyt rekyylijousi, sekä iskurin palautusjousi. Helppo asentaa. Rekyylijousisarjat 1911 Commander ja Government .45ACP pistooleihin. Sarjassa on 6 rekyylibufferia, ohjuripuikko, jäykkä ja kevyt rekyylijousi, sekä iskurin palautusjousi. Helppo asentaa.
74.9EUR074,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Made in USA
USA:n vientiluvan tyyppi: 0A501.x
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti
Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi
Tuotenro: 965064045 1911, Government, .45 ACP Valmistajan tuotenumero: 64G874218002701Rekyylijousisarjat 1911 Commander ja Government .45ACP pistooleihin. Sarjassa on 6 rekyylibufferia, ohjuripuikko, jäykkä ja kevyt rekyylijousi, sekä iskurin palautusjousi. Helppo asentaa. Rekyylijousisarjat 1911 Commander ja Government .45ACP pistooleihin. Sarjassa on 6 rekyylibufferia, ohjuripuikko, jäykkä ja kevyt rekyylijousi, sekä iskurin palautusjousi. Helppo asentaa.
74.9EUR074,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Improves Accuracy, Functioning; Elimnates Frame Cracking From Recoil
Easy-to-install kit instantly improves cycling, reliability and accuracy without modifying the frame or the slide. Exclusive, injection-molded, polyfiber buffers slip onto the guide rod be- tween the head and spring and keep the slide from hitting the frame. Prevents expensive frame damage and softens the felt recoil of high power competition loads. Full-length guide rod keeps the recoil spring straight for smoother functioning and longer spring life. Together they provide consistent barrel lockup and increased accuracy.
SPECS: Kit includes 416 stainless steel one-piece, full-length guide rod and plug, 6 Shok-Buff washers, 1 light recoil spring, 1 heavy recoil spring, 1 extra power firing pin return spring. Fits 1911 Auto models and calibers listed only.
Lisää...
Parantaa tarkkuutta, toimintaa; Elimnates runko halki rekyyli
Rekyylijousisarjat 1911 Commander ja Government .45ACP pistooleihin. Sarjassa on 6 rekyylibufferia, ohjuripuikko, jäykkä ja kevyt rekyylijousi, sekä iskurin palautusjousi. Helppo asentaa.
Tiedot: Kit sisältää 416 ruostumattomasta teräksestä yksiosainen, täyspitkä opas sauva ja liitin, 6 Shok-harrastaja pesurit, 1 kevyt palautusjousi, 1 Raskas Palautinjousen, 1 lisävoimaa iskuri palautusjousi. Lueteltujen vain sopii 1911 Auto malleja ja calibers.
Lisää...
Asiakasarviot: 1911, Commander, .45 ACP
Arvioiden lukumäärä: 13
Arvostelut brownells.com sivustolla: 13
Arvioiden keskiarvo: 4,5
Doesnt fit(12.5.2012)
Just purchased a new 1911 commander, trying to do some upgrades and these "drop in" upgrades never fit right. The guide for the main spring is toooooo long. I cant get the cap or retainer to swivel over the guide because its about 1/8 to long. Im waiting to be contacted. Hopefully it was just a wrong part mistake as i' m pretty excited about my new gun.
For my ATI 4.25" (18.12.2014)
I had to put it in the lathe and trim a little bit off then chamfer it for a smooth assembly. After a little fitting it took an ATI with a 4" grouping at 15 yards and sloppy recoil into a very nice shooter. Put 5 rounds in the same hole at 20 yards with factory ammunition.
Great product(7.10.2017)
I Installed in my Springfield Mil Spec. It was a dropin installation & really helped with accuracy & reduced recoil.
Easy install, excellent control(31.10.2009)
Installed in less than 5 minutes. Shot before and after install. Noticed a marked difference in recoil and in turn shot placement.
Great value, easy installation!(9.11.2009)
Really tightened up my gun, and grouping improved! You get a lot for the money, with a great company name behind it!
Firestorm 1911 likey(23.12.2010)
Works great in 2 of my 1911 Firestorm Govt. .45 acp
Excellent value(8.1.2012)
Best, most affordable upgrade you can do without a gunsmith. Instantly improves accuracy, reduces recoil, and makes the .45 a pleasure to shoot all day long.
Great drop-in product.(18.1.2012)
Bought this four months ago with 5,000 rounds through it to-date. Really like this product but .... be advised that once installation is complete....you will no-longer be able to just pop your slide off in a few short seconds unless you have thumbs-of-steel. The guide-rod-plug has sharp edges and even after some gentle-stoning it is strongly advised that you use a good barrel bushing wrench so you will save the end of your thumb for another-day !! Functionality of the FLGR is great, recoil is milder with the proper spring selection and it gives me piece-of-mind knowing the recoil spring is properly captured and functioning better than stock setup. Takes more time to reassemble however that's worth the performance-increase. Looks-sweet when the slide is locked back !!!
Worth the money.(29.4.2012)
I picked this kit up at a gun show today for my AMC American Classic II just to see if it made a difference and I would have to say it did. It cycles smoother and seems to be a little more accurate as it keeps everything locked up tighter. It can be a little bit of a pain to put together but nothing too big of a deal. I am happy with it.
great product(2.11.2012)
if you can clean your gun, you can install this part. I bought this mostly to combat frame battering. it seemed to have smoothed my gun up quite a bit, and has notably less muzzle flip. I'd definately buy this again if i had a second 1911.
wc SHOK-BUFF RECOIL SYSTEM(7.12.2012)
EASY INSTALL, EXCELLENT QUALITY, GREAT VALUE, WORKS PERFECTLY
Seems to work , Gun feels tight & smooth(2.5.2014)
Haven't shot the gun yet, feels tight and smooth. Put it in a 68 llama 1911, great fit. Going this weekend to see how it works.
Must Buy for 5in 1911(21.6.2014)
Installing this into your governemnt 1911 is like a pro working over your gun. Just bought a 2nd guide rod kit for my friends P14. Installed my guide rod into the P14 just to check it out, wow what a difference it make for it too. Recommend you lube the rails with high quality bearing grease and work it back and forth a 100 times or so. Did this for my SA GI stainless model and its so smooth I call it my cheap race gun. Take care, Mr. K