Korisi on tyhjä.

Ostoskori

Apu ja yhteydenotto

Ilmainen toimitus yli 250€ perustoimituksille

100:n päivän palautusoikeus

Uutiskirje

Tarjoukset

Yli 300 000 asiakasta - kiitämme teitä!

4,93/5 "Erittäin hyvä" (1400+ arvostelua)

Yli 40 000 tuotetta metsästykseen ja ammuntaan

BROWNELLS
ROLL PIN PUNCHES

050806029880 230112105

The ONLY way to properly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing.

SPECS: #1, 1⁄16" (1.6mm) x 23⁄4" (7cm) L; #2, 5⁄64" (2mm) x 3¼" (8.2cm) L; #3, 3⁄32" (2.4mm) x 3½" (9cm) L; #4, 1⁄8" (3.2mm) x 4" (10.2cm) L; #6, 3⁄16" (4.8mm) x 4½" (11.4cm) L.

Lisää...

Ainoa oikea tapa asentaa tai poistaa tapit vahingoittamatta sekä tappia että ympäröivää metallia. Pieni kohouma lyönnin päässä keskittää automaattisesti työkalun ja estää tapin litistymisen.

TEKNISET TIEDOT: #1, 1⁄16" (1.6mm) x 23⁄4" (7cm) P; #2, 5⁄64" (2mm) x 3¼" (8.2cm) P; #3, 3⁄32" (2.4mm) x 3½" (9cm) P; #4, 1⁄8" (3.2mm) x 4" (10.2cm) P; #6, 3⁄16" (4.8mm) x 4½" (11.4cm) P.

Lisää...

Asiakasarviot: BROWNELLS AR-15 ROLL PIN PUNCH KIT

Arvioiden lukumäärä: 26
Arvostelut brownells.com sivustolla: 26
Arvioiden keskiarvo: 3

Great Product (14.9.2009)

For the money, this is a perfect addition to the AR-15 toolbox.

Great tool, and best bang for the buck! (19.11.2009)

These are the best set of roll pin punches I've used. The quality is excellent.

Works very well for the intended use (21.11.2009)

Makes installation go much smoother than regular pin punches.

The perfect punch! (5.12.2009)

This Roll Pin Punch Set used in conjunction with the Roll Pin Holder Set, was very helpful for a buddy and I building our first Stripped AR15 lower. Keeps the punch centered perfectly on the roll pin eliminating the punch from slipping off and damaging the finish on the gun. We also used them to align parts prior to installing the pins.

proper tool for the job (21.1.2010)

I've always just used a smaller punch to fit in the indent of a roll pin. BUT these really are the proper tool for the job. Good quality. The reason for three stars is, They are just a set of functional punches, your ordinary tool.

Broken (10.2.2010)

Unfortunately, I broke the 1/6" punch trying to remove my charging handle pin on my AR15. I was careful but the punch, to my complete suprise, shattered. I returned the set for a new one. I will be much, much more careful. It looks like a good set, but it does have limitations.

A fantastic roll pin punch kit (14.3.2010)

The Brownells roll pin punch kit is fantastic. It's a high quality set with nice fit and finish. The best part about this set is that if you break any, Brownells will replace them for life. Yes, the tiny ones can break, but that is no different than any other set. If one breaks, Brownells has got you covered. This 5 piece set is everything you need to work on your AR. Finally, it is VERY affordable. For the price, you can't go wrong with this set. The only downside is I wish it came in some sort of pouch, they are just loose punches. Not a big problem overall.

Right Way To Work With Roll Pins (6.8.2010)

I have used this set to remove and install roll pins of different sizes in an AR platform rifle. Each time, the pin was removed and re-installed without any damage. As long as the proper diameter punch was used, the pins were easily removed. High quality materials and workmanship.

Poor Quality Punches not Straight (12.6.2011)

The punches are not manufactured by Brownells. Bought this set thinking it would be good enough. The three smaller size punches specially arrived crooked. Specially the #3 punch. Called and Brownells offered immediate refund when returned. Will be returning set and ordering the Brownells brand instead. Would not recommend

Bent (13.3.2012)

Not a single one of these punches arrived straight or anywhere close to straight, keep in mind I had expected the 1/16 to be bent or bend in use but the whole set arrived in various states of crooked I called and asked Brownells what to do and he said to send them back, I didn't bother as I had broken two of them trying to straighten them. I just went and bought a set of craftsman punches and got the job done. If I were Brownells I would take my name off of these punches as I would not be ok with that as a distributor with my name on them.

Would be better off with something Else (22.3.2012)

Smaller punch broke first time I used it, look elsewhere for a punch.

Better than expected (22.3.2012)

After reading some of the reviews I almost did not purchase this punch set. After opening the package and using these punches they are perfect. As my Dad always said the right tool for the job is the best tool, and that is what these punches are.

Well below Brownells' standards... (25.3.2012)

After ordering these roll pin punches in January, I just got around to needing them. Every punch shaft is bent/angled making alignment on the roll pin difficult. The 1/16 punch didn't last through one job - shaft broke in half. Very disappointed in these punches and Brownells putting their name on them. I will not buy anything made by Mayhew Steel for Brownell's again.

Mediocre Punch Set, Poor Quality Control (26.3.2012)

Nothing special here. Unfortunatley, you get what you pay for. The No. 3 punch in my set was already bent when I opened the package. Additionally, the other 3/32 pin punch I purchased from Brownells was mispackaged and incorrectly labeled - nice 1/16 Snap-On punch, but not a No. 3, 3/32 roll pin punch.

Bottom line, If you need a cheap set of roll pin punches and only expect them to be used once or twice, get these, otherwise, do yourself a favor and spend more money for a better quality set, even if you have to buy the ones you need individually.

Roll Pin Punch (9.4.2012)

I bought a set of these about 3 years ago and they have been great. None were bent or broken/ wrong size when I recieved them.(Brownells has excellent customer service and would most likely replace them if that were the case.) And after 3 years of use all but the no. 2 are in good shape. The no. 2 now has about a 45 degree bend in the shaft from me trying to use it incorrectly as a pry bar. I will be buying another set and would recomend them. Good quality, good price and when you use the right punch in the right hole they last a long time.

Decent - Missing important piece (15.5.2012)

The quality of these punches are good for the price.

One important thing I missed in the description is that there is no #5 (5/32"), which is probably the punch I use the most when working on AR lowers. Just keep this in mind when ordering, the description says "AR-15/M16", but it's not a complete set.

easy to use - no marring (23.9.2012)

easy to use - does the job like a pro!

Bent (8.3.2013)

3 out of 5 punches were bent, ordered the Grace punches and returned these.

Don't Bother (3.6.2013)

Used three punches. Two of them bent and one snapped in half. Don't waste your time or money on this.

seems well made (25.8.2013)

I only used one so far, worked perfectly.

Incomplete kit and poor quality punches (24.12.2013)

I gave them two stars because I only have two remaining out of the five, that are still fully functional. The others have either bent severly or just flat out broke. If you plan on using them once or twice to make some modifications to your AR then they'll probably be ok, but if you plan to use them regularly you're wasting your time and money on these. Armorers and smiths, don't even bother; time is money and these will cost you both.

One of the punches broke first use (7.2.2014)

My 3/32 punch broke the first time I used it. It snapped in half. These punches are sub-standard and I would not recommend these to anyone else.

The right tools for the job. (24.2.2014)

Don't believe the reviews about these breaking. Roll pins do not take much force to tap in. Just use light, firm taps and the pin will go in and the punch will not break. Just take of your tools and they will take care of you. I bought the 5 piece set for my 1st AR-15 build. I had no problems assembling the lower receiver because I had these, the right tools for the job. Roll pins are the basic building blocks for ARs. I wouldn't try installing them without proper roll pin punches like these. Don't use regular pin punches for that job. These punches were also useful when lining up the trigger and hammer pin holes. The small nipple on the end of the punches really help center them on the roll pins and keep from damaging the pins too. Good price and worth it too.

too brittle, break easily (23.3.2014)

The small punches break too easy. A cheap 1/16" punch from Home depot will last much longer and cost 1/4th.

Junk (14.8.2014)

They are very cheap metal and breaks way too easy

Breaks easily, too brittle (14.4.2015)

Small punches are too brittle and break easily.

Lue 26 arvostelua lisää brownells.com sivustolla

59.9 59.9 1 EUR

Tuotenro: 230112105
BROWNELLS AR-15 ROLL PIN PUNCH KIT 050806029880 Ainoa oikea tapa asentaa tai poistaa tapit vahingoittamatta sekä tappia että ympäröivää metallia. Pieni kohouma lyönnin päässä keskittää automaattisesti työkalun ja estää tapin litistymisen.

59.9 EUR 29 59,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Koko: 1/8 in, 5/64 in, 1/16 in, 3/32 in, 3/16 in Materiaali: Steel Tyyppi: Set, Roll Pin Määrä: 5

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Ominaisuudet

Koko: 1/16 in,1/8 in,3/16 in,3/32 in,5/64 in Materiaali: Steel Tyyli: Roll Pin,Set Määrä: 5 Toimituksen paino: 0,068kg Toimituksen korkeus: 15mm Toimituksen leveys: 18mm Toimituksen pituus: 122mm UPC : 050806029880

Tuotekuvaus

Made in USA

Asenna tai poista tapit turvallisesti ROLL PIN PUNCHES -sarjalla 🔧. Kestävä teräs ja tarkat koot tekevät työstäsi helpompaa!

SPECS: #1, 1⁄16" (1.6mm) x 23⁄4" (7cm) L; #2, 5⁄64" (2mm) x 3¼" (8.2cm) L; #3, 3⁄32" (2.4mm) x 3½" (9cm) L; #4, 1⁄8" (3.2mm) x 4" (10.2cm) L; #6, 3⁄16" (4.8mm) x 4½" (11.4cm) L.

Lisää...

Asiakasarviot: BROWNELLS AR-15 ROLL PIN PUNCH KIT

Arvioiden lukumäärä: 26
Arvostelut brownells.com sivustolla: 26
Arvioiden keskiarvo: 3

Great Product (14.9.2009)

For the money, this is a perfect addition to the AR-15 toolbox.

Great tool, and best bang for the buck! (19.11.2009)

These are the best set of roll pin punches I've used. The quality is excellent.

Works very well for the intended use (21.11.2009)

Makes installation go much smoother than regular pin punches.

The perfect punch! (5.12.2009)

proper tool for the job (21.1.2010)

Broken (10.2.2010)

A fantastic roll pin punch kit (14.3.2010)

Right Way To Work With Roll Pins (6.8.2010)

Poor Quality Punches not Straight (12.6.2011)

Bent (13.3.2012)

Would be better off with something Else (22.3.2012)

Smaller punch broke first time I used it, look elsewhere for a punch.

Better than expected (22.3.2012)

Well below Brownells' standards... (25.3.2012)

Mediocre Punch Set, Poor Quality Control (26.3.2012)

Roll Pin Punch (9.4.2012)

Decent - Missing important piece (15.5.2012)

easy to use - no marring (23.9.2012)

easy to use - does the job like a pro!

Bent (8.3.2013)

3 out of 5 punches were bent, ordered the Grace punches and returned these.

Don't Bother (3.6.2013)

Used three punches. Two of them bent and one snapped in half. Don't waste your time or money on this.

seems well made (25.8.2013)

I only used one so far, worked perfectly.

Incomplete kit and poor quality punches (24.12.2013)

One of the punches broke first use (7.2.2014)

My 3/32 punch broke the first time I used it. It snapped in half. These punches are sub-standard and I would not recommend these to anyone else.

The right tools for the job. (24.2.2014)

too brittle, break easily (23.3.2014)

The small punches break too easy. A cheap 1/16" punch from Home depot will last much longer and cost 1/4th.

Junk (14.8.2014)

They are very cheap metal and breaks way too easy

Breaks easily, too brittle (14.4.2015)

Small punches are too brittle and break easily.

Lue 26 arvostelua lisää brownells.com sivustolla

Tutustu AR-15 FRONT SIGHT BENCH BLOCK -tukipalaan! 🔧 Kestävä polyeteeninen tuki etutähtäimen asentamiseen ja poistamiseen.

BROWNELLS

BROWNELLS AR-15 FRONT SIGHT BENCH BLOCK
AR-15 FRONT SIGHT BENCH BLOCK

Tähtäintyökalut

3,4

Varastossa

89,90 €

AR-15/M16 LOWER RECEIVER VISE BLOCK pitää kiväärin turvallisesti paikallaan 🔧 puhdistuksen ja korjauksen aikana. Kestävä ja luotettava!

BROWNELLS

BROWNELLS AR-15/M16 LOWER RECEIVER VISE BLOCK
AR-15/M16 LOWER RECEIVER VISE BLOCK

Penkin ja ruuvipuristimen harkot

3,6

Varastossa

33,90 € 33,90 € - 79,90 €

CMMG

CMMG AR-15 GAS TUBE STAINLESS STEEL MID-LENGTH
AR-15 GAS TUBE STAINLESS STEEL

Kaasuputket

3,3

Varastossa

37,90 € 36,90 € - 42,90 €

Tarkista AR-15 patruunapesän mutterin välikappalesarja! 🔧 Saavuta täydellinen linjaus ja tarkkuus asennuksessa. Osta nyt!

BROWNELLS

BROWNELLS AR-15 BARREL NUT SHIM KIT
BARREL NUT SHIM KIT

Prikat

Varastossa

14,90 €

TTI INTL

TTI INTL BOLT CATCH PIN
GAS TUBE PIN

Liipasinkaaren sokat | Ulosheittäjän sokat | Lukon pidättimen osat

Voi laittaa jälkitilaukseen

23,90 € 17,90 € - 23,90 €

Laadukkaat STANDARD LINE nylon piipunharjat 🧼, 17 kaliiperin kivääreille, pakattu 3 kpl. Tehokas puhdistus ilman naarmuja!

BROWNELLS

BROWNELLS 17 CALIBER STANDARD LINE NYLON RIFLE BRUSH 3/PACK
STANDARD LINE NYLON RIFLE BORE BRUSHES

Piippuharjat

Varastossa

19,90 € 18,90 € - 54,90 €

BROWNELLS

BROWNELLS RIFLE BENCH BLOCK
EXTRA-LARGE BENCH BLOCKS

Työpenkin harkot

4,8

Varastossa

59,90 €

BROWNELLS

BROWNELLS COMPLETE 7-PIECE ROLL PIN PUNCH KIT
ROLL PIN PUNCHES

Tuurnat

3,4

Varastossa

74,90 € 16,90 € - 74,90 €

BROWNELLS
ROLL PIN PUNCHES

Asiakasarviot: BROWNELLS AR-15 ROLL PIN PUNCH KIT

Ominaisuudet

Tuotekuvaus

Asiakasarviot: BROWNELLS AR-15 ROLL PIN PUNCH KIT

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

BROWNELLS ROLL PIN PUNCHES

Asiakasarviot: BROWNELLS AR-15 ROLL PIN PUNCH KIT

Ominaisuudet

Tuotekuvaus

Asiakasarviot: BROWNELLS AR-15 ROLL PIN PUNCH KIT

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

BROWNELLS
ROLL PIN PUNCHES