Wide Pivot Range Allows Easy Transitions From Primary To Secondary Shoulders
Ambidextrous Sling Attachment Point for quick-detach swivels adds a centrally located socket at the rear of the receiver. More than 180° of sling movement enables both left- and right-handed shooters to quickly shift their weapon between shoulders, plus the mount cup is angled slightly downward for greater freedom of motion and to create a finished look. Low-profile design includes rounded edges that minimize snagging. Constructed from durable, case-hardened, precision-cast steel with a Melonite™ finish for extreme resistance to wear and corrosion. To install, remove the standard AR-15/M4 carbine stock receiver end plate and slide on the ASAP-QD. Works with one-point type slings with push-button QD connectors, like Magpul's MS4® Dual QD GEN 2 Sling, as well as the MS1® Multi-Mission Sling with a QD loop assembled on back. Slings sold separately.
SPECS: Steel, Melonite, matte black. Fits mil- and commercial-spec carbine receiver extensions (buffer tubes). Not compatible with A1/A2 fixed stocks or similarly mounted stock such as Magpul PRS, UBR, and MOE rifle stocks. Installation instructions included.
Lisää...
Laaja kääntymisalue mahdollistaa sujuvat siirtymät ensisijaiselta toiselle olkapäälle
Ambidestroinen pikakiinnityspiste pikairrotettaville remmeille lisää keskeisesti sijoitetun liitännän vastaanottimen takaosaan. Yli 180°:n remmin liike mahdollistaa sekä vasen- että oikeakätisille ampujille aseen nopean siirtämisen olkapäältä toiselle, ja kiinnityskuppi on hieman alaspäin kallistettu, mikä lisää liikkumisvapautta ja luo viimeistellyn ilmeen. Matalan profiilin suunnittelu sisältää pyöristetyt reunat, jotka minimoivat takertumisen. Valmistettu kestävästä, karkaistusta, tarkkuusvalusta teräksestä, jossa on Melonite™-viimeistely äärimmäisen kulutuksen ja korroosion kestävyyden takaamiseksi. Asennukseen poista standardi AR-15/M4-karbiinin perän vastaanottimen loppulevy ja liu'uta ASAP-QD paikalleen. Toimii yksipistetyyppisten remmien kanssa, joissa on painikkeella irrotettavat QD-liittimet, kuten Magpulin MS4® Dual QD GEN 2 -remmi sekä MS1® Multi-Mission -remmi, jossa on QD-silmukka takana. Remmit myydään erikseen.
SPECS: Teräs, Meloniitti, mattamusta. Sopii sekä sotilaallisiin että kaupallisiin karbiinivastaanottimen laajennuksiin (puskuriputket). Ei yhteensopiva A1/A2 kiinteiden tukien tai vastaavalla tavalla kiinnitettävien tukien kanssa, kuten Magpul PRS, UBR ja MOE kivääritukit. Asennusohjeet sisältyvät.
Lisää...
Asiakasarviot: MAGPUL ASAP QD AMBIDEXTROUS SLING ATTACHMENT POINT BLACK
Arvioiden lukumäärä: 7
Arvostelut brownells.com sivustolla: 7
Arvioiden keskiarvo: 3,9
Needs more ergonomic refinement(24.7.2014)
The position of the QD mechanism and sling interferes with the grip. The sling gets in position that gets in the way of the web of the hand and the grip. It will be very difficult to establish a grip with a MOE or similar due to the angle of the grip. A K2 or similar works a lot better but still when the sling is under tension it presses downwards against the web of the hand. Also, when the sling tension relaxes it falls behind the grip and in a hurry its difficult to get out of the way. This needs to be located at the side. This experience was using an MS4 sling and both the MOE and K2 grips.
Works fine(30.7.2014)
Have a similar set up with a different brand. Saw Magpul's and threw it on another AR. Works fine. I do think the Magpuls look a bit nicer and the edges are more round. So, more ergonomic. This set up is one of many different single point sling options for your AR. For the one star reviewer, he's giving the product one star because he doesn't like the set up, not because the Magpul sling mount is bad. I have a box full of different mounts, furniture and various parts that have ended up there after 20 years of tweaking my AR's. Doesn't mean the things in the box are bad quality, just that I ended up not liking them on my AR's.
Magpul comes through again!(6.8.2014)
There are many end plate QD sling mounts out there lately, but Magpul raised the bar with the angled QD socket, rounded edges, and Melonite finish.
works but going back to Noveske(14.12.2014)
It is a nice looking product and works as advertised, however it is IMPOSSIBLE to stake since its made of such hard material, seriously I could not dent it! I ended up destroying my castle nut trying to stake the thing (my fault I know) So I'm removing it and putting the Noveske QD end plate on. If you don't plan on staking your end plate it will be fine and do everything you need it to. Not for me however kinda bummed I wasted $30 on the thing because I do really like magpul products this is the first thing I have disliked.
Excellent QD Plate, 1 Minor Flaw(23.4.2015)
I will start by admitting that I am a Magpul Fanboy. If Magpul made a silverware set, I'd buy 3 of them. I really do like this QD End Plate, but it is slightly flawed (In My Opinion, more on that in a minute).
Quick bit of info: I am building a custom lower and I am using a Spike's 6 position buffer tube, Magpul CTR Mil-Spec Stock, and the Magpul MS4 QD Sling. I added the Magpul ASAP-QD in place of my original Noveske QD Endplate.
With the Noveske Plate (which is as minimalist as you can get) will allow the CTR stock to close on the 1st buffer tube position (stock totally collapsed). It pushes all the way against the push button QD, but it will close and lock into place (it closes and locks the QD against the stock, will not come loose *See Attached Picture, picked from Google not my Image*).
The new Magpul ASAP-QD will NOT allow the CTR stock to collapse completely (position 1). It gets very close, but with the angle of the QD Socket has in addition to the added depth of the unit (for strength I assume?) the stock will not collapse totally.
I emailed Magpul with this information, and I was informed this is a "Side Effect" of using the CTR with the ASAP-QD and nothing can really be done about it. A bit of an oversight by them in my opinion.
Now, all that being said, it is not an issue for me. I do not shoot my gun with the stock totally collapsed. I think the ASAP-QD is a very nice addition to your gun. Just be aware of your stock choices, as it might not close entirely.
The finish on the ASAP-QD is flawless, its super hard steel as another reviewer has noted (though I don't believe it was 2 star worthy). I would not hesitate to buy another, I would just go with a different stock next time.
Works as advertised, rock solid. Used on a DDI stamped ak-47, with a rifle dynamics m4 stock adapter, a voltor buffer tube, and a DMPS castle nut
Nice QD Sling Mount(27.8.2018)
Install was quick & easy - If you don't have AR tools consider castle nut removal before purchasing. Works well for sling connection point, may not have purchased this if my adjustable stock had a QD mount integrated. Part is solid, QD connects easily and zero issues when in use. Would purchase again.
Tuotenro: 100015153 MAGPUL ASAP QD AMBIDEXTROUS SLING ATTACHMENT POINT BLACK Valmistajan tuotenumero: MAG529-BLK873750011844 Ambidestroinen pikakiinnityspiste pikairrotettaville remmeille lisää keskeisesti sijoitetun liitännän vastaanottimen takaosaan. Yli 180°:n remmin liike mahdollistaa sekä vasen- että oikeakätisille ampujille aseen nopean siirtämisen olkapäältä toiselle, ja kiinnityskuppi on hieman alaspäin kallistettu, mikä lisää liikkumisvapautta ja luo viimeistellyn ilmeen. Matalan profiilin suunnittelu sisältää pyöristetyt reunat, jotka minimoivat takertumisen. Valmistettu kestävästä, karkaistusta, tarkkuusvalusta teräksestä, jossa on Melonite™-viimeistely äärimmäisen kulutuksen ja korroosion kestävyyden takaamiseksi. Asennukseen poista standardi AR-15/M4-karbiinin perän vastaanottimen loppulevy ja liu'uta ASAP-QD paikalleen. Toimii yksipistetyyppisten remmien kanssa, joissa on painikkeella irrotettavat QD-liittimet, kuten Magpulin MS4® Dual QD GEN 2 -remmi sekä MS1® Multi-Mission -remmi, jossa on QD-silmukka takana. Remmit myydään erikseen.
44.9EUR39744,90 €
*
Toimitusaika noin 5-7 päivää. Enemmän kuin 10 kpl. Euroopan varastossa
Ominaisuudet:Materiaali: SteelTyyppi: Rifle Sling AdapterVäri: Black
Ambidestroinen pikakiinnityspiste lisää keskeisesti sijoitetun liitännän vastaanottimen takaosaan, mahdollistaen aseen nopean siirtämisen olkapäältä toiselle.
Valmistettu kestävästä, karkaistusta teräksestä, jossa on Melonite™-viimeistely äärimmäisen kulutuksen ja korroosion kestävyyden takaamiseksi.
Toimii yksipistetyyppisten remmien kanssa, joissa on painikkeella irrotettavat QD-liittimet, kuten Magpulin MS4® Dual QD GEN 2 -remmi sekä MS1® Multi-Mission -remmi.
Wide Pivot Range Allows Easy Transitions From Primary To Secondary Shoulders
Ambidextrous Sling Attachment Point for quick-detach swivels adds a centrally located socket at the rear of the receiver. More than 180° of sling movement enables both left- and right-handed shooters to quickly shift their weapon between shoulders, plus the mount cup is angled slightly downward for greater freedom of motion and to create a finished look. Low-profile design includes rounded edges that minimize snagging. Constructed from durable, case-hardened, precision-cast steel with a Melonite™ finish for extreme resistance to wear and corrosion. To install, remove the standard AR-15/M4 carbine stock receiver end plate and slide on the ASAP-QD. Works with one-point type slings with push-button QD connectors, like Magpul's MS4® Dual QD GEN 2 Sling, as well as the MS1® Multi-Mission Sling with a QD loop assembled on back. Slings sold separately.
SPECS: Steel, Melonite, matte black. Fits mil- and commercial-spec carbine receiver extensions (buffer tubes). Not compatible with A1/A2 fixed stocks or similarly mounted stock such as Magpul PRS, UBR, and MOE rifle stocks. Installation instructions included.
Lisää...
Laaja kääntymisalue mahdollistaa sujuvat siirtymät ensisijaiselta toiselle olkapäälle
Ambidestroinen pikakiinnityspiste pikairrotettaville remmeille lisää keskeisesti sijoitetun liitännän vastaanottimen takaosaan. Yli 180°:n remmin liike mahdollistaa sekä vasen- että oikeakätisille ampujille aseen nopean siirtämisen olkapäältä toiselle, ja kiinnityskuppi on hieman alaspäin kallistettu, mikä lisää liikkumisvapautta ja luo viimeistellyn ilmeen. Matalan profiilin suunnittelu sisältää pyöristetyt reunat, jotka minimoivat takertumisen. Valmistettu kestävästä, karkaistusta, tarkkuusvalusta teräksestä, jossa on Melonite™-viimeistely äärimmäisen kulutuksen ja korroosion kestävyyden takaamiseksi. Asennukseen poista standardi AR-15/M4-karbiinin perän vastaanottimen loppulevy ja liu'uta ASAP-QD paikalleen. Toimii yksipistetyyppisten remmien kanssa, joissa on painikkeella irrotettavat QD-liittimet, kuten Magpulin MS4® Dual QD GEN 2 -remmi sekä MS1® Multi-Mission -remmi, jossa on QD-silmukka takana. Remmit myydään erikseen.
SPECS: Teräs, Meloniitti, mattamusta. Sopii sekä sotilaallisiin että kaupallisiin karbiinivastaanottimen laajennuksiin (puskuriputket). Ei yhteensopiva A1/A2 kiinteiden tukien tai vastaavalla tavalla kiinnitettävien tukien kanssa, kuten Magpul PRS, UBR ja MOE kivääritukit. Asennusohjeet sisältyvät.
Lisää...
Asiakasarviot: MAGPUL ASAP QD AMBIDEXTROUS SLING ATTACHMENT POINT BLACK
Arvioiden lukumäärä: 7
Arvostelut brownells.com sivustolla: 7
Arvioiden keskiarvo: 3,9
Needs more ergonomic refinement(24.7.2014)
The position of the QD mechanism and sling interferes with the grip. The sling gets in position that gets in the way of the web of the hand and the grip. It will be very difficult to establish a grip with a MOE or similar due to the angle of the grip. A K2 or similar works a lot better but still when the sling is under tension it presses downwards against the web of the hand. Also, when the sling tension relaxes it falls behind the grip and in a hurry its difficult to get out of the way. This needs to be located at the side. This experience was using an MS4 sling and both the MOE and K2 grips.
Works fine(30.7.2014)
Have a similar set up with a different brand. Saw Magpul's and threw it on another AR. Works fine. I do think the Magpuls look a bit nicer and the edges are more round. So, more ergonomic. This set up is one of many different single point sling options for your AR. For the one star reviewer, he's giving the product one star because he doesn't like the set up, not because the Magpul sling mount is bad. I have a box full of different mounts, furniture and various parts that have ended up there after 20 years of tweaking my AR's. Doesn't mean the things in the box are bad quality, just that I ended up not liking them on my AR's.
Magpul comes through again!(6.8.2014)
There are many end plate QD sling mounts out there lately, but Magpul raised the bar with the angled QD socket, rounded edges, and Melonite finish.
works but going back to Noveske(14.12.2014)
It is a nice looking product and works as advertised, however it is IMPOSSIBLE to stake since its made of such hard material, seriously I could not dent it! I ended up destroying my castle nut trying to stake the thing (my fault I know) So I'm removing it and putting the Noveske QD end plate on. If you don't plan on staking your end plate it will be fine and do everything you need it to. Not for me however kinda bummed I wasted $30 on the thing because I do really like magpul products this is the first thing I have disliked.
Excellent QD Plate, 1 Minor Flaw(23.4.2015)
I will start by admitting that I am a Magpul Fanboy. If Magpul made a silverware set, I'd buy 3 of them. I really do like this QD End Plate, but it is slightly flawed (In My Opinion, more on that in a minute).
Quick bit of info: I am building a custom lower and I am using a Spike's 6 position buffer tube, Magpul CTR Mil-Spec Stock, and the Magpul MS4 QD Sling. I added the Magpul ASAP-QD in place of my original Noveske QD Endplate.
With the Noveske Plate (which is as minimalist as you can get) will allow the CTR stock to close on the 1st buffer tube position (stock totally collapsed). It pushes all the way against the push button QD, but it will close and lock into place (it closes and locks the QD against the stock, will not come loose *See Attached Picture, picked from Google not my Image*).
The new Magpul ASAP-QD will NOT allow the CTR stock to collapse completely (position 1). It gets very close, but with the angle of the QD Socket has in addition to the added depth of the unit (for strength I assume?) the stock will not collapse totally.
I emailed Magpul with this information, and I was informed this is a "Side Effect" of using the CTR with the ASAP-QD and nothing can really be done about it. A bit of an oversight by them in my opinion.
Now, all that being said, it is not an issue for me. I do not shoot my gun with the stock totally collapsed. I think the ASAP-QD is a very nice addition to your gun. Just be aware of your stock choices, as it might not close entirely.
The finish on the ASAP-QD is flawless, its super hard steel as another reviewer has noted (though I don't believe it was 2 star worthy). I would not hesitate to buy another, I would just go with a different stock next time.
Works as advertised, rock solid. Used on a DDI stamped ak-47, with a rifle dynamics m4 stock adapter, a voltor buffer tube, and a DMPS castle nut
Nice QD Sling Mount(27.8.2018)
Install was quick & easy - If you don't have AR tools consider castle nut removal before purchasing. Works well for sling connection point, may not have purchased this if my adjustable stock had a QD mount integrated. Part is solid, QD connects easily and zero issues when in use. Would purchase again.