Weaver-style rail conforms to receiver curvature and attaches to existing mounting holes, centering any diameter scope directly over the barrel. Lets you mount full-size scopes and red-dot optics. Provides enough clearance to keep original rear sights in place. Easy installation: remove bolt cover, if present, to allow bolt to clear mount; add rings and scope of choice.
SPECS: Aluminum, black anodized finish. Rail measures 4-7/16" (11.3cm) long, 9/16" (1.4cm) high. Fits following models with side-tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield rifles (made by Mossberg) with side-tapped holes measuring 1-5/8" (4.1cm) center-to-center.
Lisää...
Päivitä Vanha Rimfire-tähtäimesi Valitsemallasi Optiikalla
Weaver-tyylinen kisko mukautuu vastaanottimen kaarevuuteen ja kiinnitetään olemassa oleviin kiinnitysreikiin, keskittäen minkä tahansa halkaisijan tähtäimen suoraan piipun ylle. Mahdollistaa täysikokoisten tähtäinten ja punapistetähtäinten asentamisen. Tarjoaa tarpeeksi tilaa säilyttää alkuperäiset takatähtäimet paikoillaan. Helppo asennus: poista tarvittaessa pultin kansi, jotta pultti mahtuu kiskon ohi; lisää renkaat ja valitsemasi tähtäin.
TEKNISET TIEDOT: Alumiinia, musta anodisoitu viimeistely. Kisko on 4-7/16" (11,3 cm) pitkä, 9/16" (1,4 cm) korkea. Sopii seuraaviin malleihin, joissa on sivusta kierteitetty vastaanotin: 26B, 26C, 42A, 42B, 42C, 42M (kaikki variantit), 43, 44B, 44US (kaikki variantit), 46A, 46B (kaikki variantit), 46M (kaikki variantit), sekä useimmat Wards-Westernfield kiväärit (valmistanut Mossberg), joissa on sivusta kierteitetyt reiät, jotka ovat keskeltä keskelle 1-5/8" (4,1 cm).
Lisää...
Asiakasarviot: HAVLIN M22 SCOPE MOUNT
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 11
Arvioiden keskiarvo: 5
great product(29.10.2009)
this mount was a direct replacement product was exactly as described
Good Product!!!!(19.11.2009)
This mount fit perfectly on the Mossberg 44US, the holes on the Mossberg were pre-drilled so it was installed in a matter of minutes. Installing a scope with this mount was very simple. The product is manufactured well and does NOT feel cheap.
Good product(29.5.2011)
Does exactly what it's supposed to do at a good price.
Easy to install(2.2.2012)
This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!
Solid and Well made(6.6.2012)
Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw
Jum
Great Product(10.6.2012)
Bought this for a Stevens mdl 87 (branded Western Field). This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!
I would buy this product again and again(8.7.2012)
Bought this mount for a Wards/Mossberg Model 41 22. Mounted a BSA Sweet 22 scope and sighted it in at the range. Proceeded to knock chickens down at 200 yards. What a rifle. Couldn't have done it without your mount. Thanks
Havlin M22 scope mount on old Savage 6A(4.12.2014)
I bought an old pre-war Savage 6A about two months ago at a local gun show(always was kind of interested in the old "gill guns" ;-) ) that was drilled with scope mounting screws that were approximately 1-5/8" apart. Not knowing much about the scope mounts that fit this type of rifle, I first bought an old Weaver N2 mount for it off of GunBroker (I read somewhere on line that this was the type of scope mount that was most often used on these types of guns). Well, the N2's scope mounting holes weren't even close to fitting. I saw this mount (Havlin M22) while looking for something else on the Brownell's website, and the fact that it had the screw mounting holes 1-5/8" apart and basically appeared to be similar to the old Weaver N series of scope mounts intrigued me. This mount fit perfectly! I'm even also quite surprised that the two hex head mounting screws that came with it fit without having to be modified somehow (I read sometimes that the hex head mounting screws that come with the Weaver have to be dremeled shorter to fit). So if you have an old Savage 6A .22 laying around that you want to scope and it has scope mounting holes 1-5/8" apart on it, I would seriously think about giving this mount a try!
Wards Western Field 47C(4.10.2015)
Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.
Mounted on 46m mossberg 22 rifle(13.12.2017)
Works good . You can't go wrong. Fast shipping. Thanks JIM.
Fits Mossberg Model 42 vintage 1935(11.7.2018)
Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.
Tuotenro: 100001258 HAVLIN M22 SCOPE MOUNT Valmistajan tuotenumero: NONE Weaver-tyylinen kisko mukautuu vastaanottimen kaarevuuteen ja kiinnitetään olemassa oleviin kiinnitysreikiin, keskittäen minkä tahansa halkaisijan tähtäimen suoraan piipun ylle. Mahdollistaa täysikokoisten tähtäinten ja punapistetähtäinten asentamisen. Tarjoaa tarpeeksi tilaa säilyttää alkuperäiset takatähtäimet paikoillaan. Helppo asennus: poista tarvittaessa pultin kansi, jotta pultti mahtuu kiskon ohi; lisää renkaat ja valitsemasi tähtäin.
69.9EUR2869,90 €
*
Toimitusaika noin 2-4 viikkoa. Yli 10 kpl. USA:n varastossa
Weaver-style rail conforms to receiver curvature and attaches to existing mounting holes, centering any diameter scope directly over the barrel. Lets you mount full-size scopes and red-dot optics. Provides enough clearance to keep original rear sights in place. Easy installation: remove bolt cover, if present, to allow bolt to clear mount; add rings and scope of choice.
SPECS: Aluminum, black anodized finish. Rail measures 4-7/16" (11.3cm) long, 9/16" (1.4cm) high. Fits following models with side-tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield rifles (made by Mossberg) with side-tapped holes measuring 1-5/8" (4.1cm) center-to-center.
Lisää...
Päivitä Vanha Rimfire-tähtäimesi Valitsemallasi Optiikalla
Weaver-tyylinen kisko mukautuu vastaanottimen kaarevuuteen ja kiinnitetään olemassa oleviin kiinnitysreikiin, keskittäen minkä tahansa halkaisijan tähtäimen suoraan piipun ylle. Mahdollistaa täysikokoisten tähtäinten ja punapistetähtäinten asentamisen. Tarjoaa tarpeeksi tilaa säilyttää alkuperäiset takatähtäimet paikoillaan. Helppo asennus: poista tarvittaessa pultin kansi, jotta pultti mahtuu kiskon ohi; lisää renkaat ja valitsemasi tähtäin.
TEKNISET TIEDOT: Alumiinia, musta anodisoitu viimeistely. Kisko on 4-7/16" (11,3 cm) pitkä, 9/16" (1,4 cm) korkea. Sopii seuraaviin malleihin, joissa on sivusta kierteitetty vastaanotin: 26B, 26C, 42A, 42B, 42C, 42M (kaikki variantit), 43, 44B, 44US (kaikki variantit), 46A, 46B (kaikki variantit), 46M (kaikki variantit), sekä useimmat Wards-Westernfield kiväärit (valmistanut Mossberg), joissa on sivusta kierteitetyt reiät, jotka ovat keskeltä keskelle 1-5/8" (4,1 cm).
Lisää...
Asiakasarviot: HAVLIN M22 SCOPE MOUNT
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 11
Arvioiden keskiarvo: 5
great product(29.10.2009)
this mount was a direct replacement product was exactly as described
Good Product!!!!(19.11.2009)
This mount fit perfectly on the Mossberg 44US, the holes on the Mossberg were pre-drilled so it was installed in a matter of minutes. Installing a scope with this mount was very simple. The product is manufactured well and does NOT feel cheap.
Good product(29.5.2011)
Does exactly what it's supposed to do at a good price.
Easy to install(2.2.2012)
This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!
Solid and Well made(6.6.2012)
Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw
Jum
Great Product(10.6.2012)
Bought this for a Stevens mdl 87 (branded Western Field). This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!
I would buy this product again and again(8.7.2012)
Bought this mount for a Wards/Mossberg Model 41 22. Mounted a BSA Sweet 22 scope and sighted it in at the range. Proceeded to knock chickens down at 200 yards. What a rifle. Couldn't have done it without your mount. Thanks
Havlin M22 scope mount on old Savage 6A(4.12.2014)
I bought an old pre-war Savage 6A about two months ago at a local gun show(always was kind of interested in the old "gill guns" ;-) ) that was drilled with scope mounting screws that were approximately 1-5/8" apart. Not knowing much about the scope mounts that fit this type of rifle, I first bought an old Weaver N2 mount for it off of GunBroker (I read somewhere on line that this was the type of scope mount that was most often used on these types of guns). Well, the N2's scope mounting holes weren't even close to fitting. I saw this mount (Havlin M22) while looking for something else on the Brownell's website, and the fact that it had the screw mounting holes 1-5/8" apart and basically appeared to be similar to the old Weaver N series of scope mounts intrigued me. This mount fit perfectly! I'm even also quite surprised that the two hex head mounting screws that came with it fit without having to be modified somehow (I read sometimes that the hex head mounting screws that come with the Weaver have to be dremeled shorter to fit). So if you have an old Savage 6A .22 laying around that you want to scope and it has scope mounting holes 1-5/8" apart on it, I would seriously think about giving this mount a try!
Wards Western Field 47C(4.10.2015)
Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.
Mounted on 46m mossberg 22 rifle(13.12.2017)
Works good . You can't go wrong. Fast shipping. Thanks JIM.
Fits Mossberg Model 42 vintage 1935(11.7.2018)
Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.