Yli 300 000 asiakasta - kiitämme teitä!

Yli 40 000 tuotetta metsästykseen ja ammuntaan

850036188193 430104507
Description The Patent Pending Arisaka Hand Stop is a continuation of Arisaka’s low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation. The Hand Stop can also be used as a barricade stop, or reversed and placed at the front of the handguard to prevent the support hand from slipping off the end. The size and profile were designed to fit a wide variety of hands without being too large to get in the way. The Arisaka Hand Stop Picatinny uses a unique recoil lug that extends from inside the part, providing a secure, rattle free lockup. The recoil lug and patched mating screw are captured and cannot fall out when the Hand Stop is removed from the Picatinny rail. A rotation direction indication is CNC engraved onto the part to aid in tightening or loosening the recoil lug. A 7/64" Allen wrench is required for installation, with a maximum torque specification of 15 inch lbs. Specs Height: 1.3" Width: 1.19" at Picatinny clamp, 0.625" at main interface where your hand or fingers contact. Length: 1.1" Weight: 0.84 oz The Hand Stop is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Requires a 7/64" Allen wrench for installation (not included). Maximum torque: 15 inch lbs. Hardware: One 6-32x1/2" hex cap head screw, one HS-P recoil lug. Made in the USA.
64.9 64.9 1 EUR
Tuotenro: 430104507
ARISAKA DEFENSE HAND STOP PICATINNY
Valmistajan tuotenumero: HS-P 850036188193
64.9 EUR 8 64,90 € *
Toimitusaika noin 2-4 viikkoa.
8 kpl. USA:n varastossa
Ominaisuudet: Attachment: Picatinny Materiaali: Aluminum Väri: Black

Ominaisuudet

Attachment: Picatinny Materiaali: Aluminum Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 32mm Toimituksen leveys: 102mm Toimituksen pituus: 102mm UPC : 850036188193

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1




Tutustu Arisaka Defensein Picatinny Hand Stop -tuotteeseen! 🔧 Kestävä alumiinista valmistettu musta käsituki. Paranna otettasi nyt!

Description The Patent Pending Arisaka Hand Stop is a continuation of Arisaka’s low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation. The Hand Stop can also be used as a barricade stop, or reversed and placed at the front of the handguard to prevent the support hand from slipping off the end. The size and profile were designed to fit a wide variety of hands without being too large to get in the way. The Arisaka Hand Stop Picatinny uses a unique recoil lug that extends from inside the part, providing a secure, rattle free lockup. The recoil lug and patched mating screw are captured and cannot fall out when the Hand Stop is removed from the Picatinny rail. A rotation direction indication is CNC engraved onto the part to aid in tightening or loosening the recoil lug. A 7/64" Allen wrench is required for installation, with a maximum torque specification of 15 inch lbs. Specs Height: 1.3" Width: 1.19" at Picatinny clamp, 0.625" at main interface where your hand or fingers contact. Length: 1.1" Weight: 0.84 oz The Hand Stop is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Requires a 7/64" Allen wrench for installation (not included). Maximum torque: 15 inch lbs. Hardware: One 6-32x1/2" hex cap head screw, one HS-P recoil lug. Made in the USA.
Takaisin alkuun