BROWNELLS
19LS LUISTI JA PIIPPU GLOCK 19

078000424

The Brownells Glock® 19LS RMR Slide & Barrel Kit is a great way to build your own customized Glock® from the ground up! Included in this kit is a Brownells 19LS Extended Slide for Glock®19. The 19LS Slide is available with stantard Glock~ dovetail for iron isghts or an upgraded version ready for a RMR MRDS. Slide is available with window cuts to reduce reciprocating mass for less recoil and enhanced barrel cooling. A precision machined Brownells Extended 9mm Barrel for Glock® 19 rounds out the Brownells Glock® 19 Extended RMR Slide & Barrel Kit, ensuring exact fit and performance. Your choice of threaded or non-threaded. Nitride finished Slide & barrel 1-10" RH, 6 groove twist Available with standard or 1/2"-28 threaded muzzle 17-4 stainless steel slide, 7.21" OAL Fits Gen3 frames only The Brownells Glock® 19LS Slide & Barrel Kit is a great choice for building a concealed carry pistol where length is a concern, but grip printing is. Channel liner required for these slides. Channel liners are a press fit and require a tool to install. Includes patented optic cut technology pioneered by ZEV Technologies. Patent No. RE47335

Lisää...

Brownells Glock® 19LS RMR Slide & Barrel Kit on erinomainen tapa rakentaa oma räätälöity Glock® alusta alkaen! Tähän sarjaan sisältyy Brownellsin 19LS Extended Slide Glock®19:lle. 19LS Slide on saatavilla joko perinteisellä Glockin uralla rautatähtäimiä varten tai päivitettynä versiona valmiina RMR MRDS:ää varten. Liukupinta on saatavilla ikkunaleikkauksilla, jotka vähentävät edestakaisin liikkuvaa massaa pienentäen rekyyliä ja parantaen piipun jäähdytystä. Brownellsin tarkkuuskoneistettu Extended 9mm Barrel Glock® 19:lle viimeistelee Brownells Glock® 19 Extended RMR Slide & Barrel Kitin, varmistaen täydellisen istuvuuden ja suorituskyvyn. Valittavissa kierteellinen tai kierretytön malli. Nitridipinnoitettu Slide & piippu 1-10" RH, 6 uran kierteitys Saatavilla vakiolla tai 1/2"-28 kierteitetyllä suulla 17-4 ruostumaton teräs slide, 7.21" OAL Sopii vain Gen3 runkoihin Brownells Glock® 19LS Slide & Barrel Kit on erinomainen valinta piilokantopistoolin rakentamiseen, kun pituus on huolenaihe, mutta kahvan painautuminen ei ole. Nämä liukupinnat vaativat kanavalinerin. Kanavalinerit ovat prässäytyvällä istuvuudella ja niiden asentamiseen tarvitaan työkalu. Mukana ZEV Technologiesin pioneeri patentoitu optiikkaleikkausteknologia. Patentti No. RE47335

Lisää...

Asiakasarviot: 19LS piippu ja rautatähtäimille tarkoitettu luisti Gen 3

Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 4,2

Great Price, Easy installation (7.7.2018)

Cons:

The barrel finish seems like it will wear easily as it is already showing some signs of wear after one range visit. It does not come with a thread protector. Be sure to order one, unless they decide to include with the product in the future.

Pros:

Finish on the slide are great and the fitment has tight tolerances. Since this was a build that was pieced together with many different parts, some fitting was required and expected. The dovetail cut tolerance was so tight that a rear sight installation tool wouldn't slide the sight in. I had to take a small amount of material off the rear sight to fit it. The RMR cut was was great as it had a strong pressure fit without any play prior to screw installation. I used shadow systems upper parts kit with no installation issues for my slide.

<img width="500" src='/userdocs/reviewimages/ab6f4a4e-c437-4619-811a-39d8ac952eaa.jpg' alt=''>

Nope (2.7.2018)

Hole for extractor too tight and the holes for the safety plunger don't even line up so i can't install any extractor or plunger.

Tried forcing plunger in, thinking perhaps it was a problem with the finish, but that was a poor decision, plunger got stuck and the slide is now completely useless.

Reliable Glock 19L (14.9.2018)

I built this slide up with an OEM internals kit and threw it on my 3rd Gen Glock 19. I took it to the range and put about 100 rounds through it, using Glock Factory, Magpul, and ETS 10rd magazines with no failures or stoppages of any kind. I like the front serrations and the overall look, and had no trouble installing ameriglo suppressor height sights. I haven't gotten an RMR for it yet, but I was able to find a cover plate online. Overall, I'm glad I payed the extra dough for a longslide upper instead of just getting the stock slide milled.

Nice Combo for Polymer 80 Completion (8.7.2018)

Very nice product. I used OEM Glock internals, which I think is a good idea. The barrel does wear on the locking block in an interesting way, and I have seen it that way on others like this.

Sights installed easily. This was well-machined. The front serrations are a plus.

Very classy, amazing quality for price (7.7.2018)

Wow I've been very pleased with this slide so far. I am using it on a Glock 19 equivalent frame and it fits just fine. Channel liner install is a little tight, use some CLP or glock grease to get it in there. You can easily use the body of a plastic pen to fit snugly against the liner and tap it **lightly** until it's completely down.

Other than that, the fit and finish looks great. I am a huge fan of front serrations. I wish more optic cuts were available, as I have a Vortex Venom and would like to mount it directly to the slide. Also I was not pleased to see that the barrel does not include a thread protector, which would not be a problem if there was a correctly fitting protector offered by Brownells. I ended up buying a $17 protector with free shipping, but the problem is 1. it's huge and looks a bit dorky, and 2. it's a bit too long so the last few threads hang off the end of the barrel and will be subjected to the torment of the muzzle blast.

Other than that though I am very happy with this slide and barrel!

<img width="500" src='/userdocs/reviewimages/2e11b490-6638-42b8-a5a6-178b5f800d8b.jpg' alt=''>

Lue 5 arvostelua lisää brownells.com sivustolla

679.9 679.9 8 EUR

Tuotenro: 078000424
19LS piippu ja rautatähtäimille tarkoitettu luisti Gen 3 Brownells Glock® 19LS RMR Slide & Barrel Kit on erinomainen tapa rakentaa oma räätälöity Glock® alusta alkaen! Tähän sarjaan sisältyy Brownellsin 19LS Extended Slide Glock®19:lle. 19LS Slide on saatavilla joko perinteisellä Glockin uralla rautatähtäimiä varten tai päivitettynä versiona valmiina RMR MRDS:ää varten. Liukupinta on saatavilla ikkunaleikkauksilla, jotka vähentävät edestakaisin liikkuvaa massaa pienentäen rekyyliä ja parantaen piipun jäähdytystä. Brownellsin tarkkuuskoneistettu Extended 9mm Barrel Glock® 19:lle viimeistelee Brownells Glock® 19 Extended RMR Slide & Barrel Kitin, varmistaen täydellisen istuvuuden ja suorituskyvyn. Valittavissa kierteellinen tai kierretytön malli. Nitridipinnoitettu Slide & piippu 1-10" RH, 6 uran kierteitys Saatavilla vakiolla tai 1/2"-28 kierteitetyllä suulla 17-4 ruostumaton teräs slide, 7.21" OAL Sopii vain Gen3 runkoihin Brownells Glock® 19LS Slide & Barrel Kit on erinomainen valinta piilokantopistoolin rakentamiseen, kun pituus on huolenaihe, mutta kahvan painautuminen ei ole. Nämä liukupinnat vaativat kanavalinerin. Kanavalinerit ovat prässäytyvällä istuvuudella ja niiden asentamiseen tarvitaan työkalu. Mukana ZEV Technologiesin pioneeri patentoitu optiikkaleikkausteknologia. Patentti No. RE47335

Ilmoita saatavuudesta

Tätä tuotetta ei voi valitettavasti tilata.

Ominaisuudet: Malli: 19, 23, 32 Merkki: Glock Patruuna: 9 mm Luger Tyyppi: Window Tähtäimet: Dovetail Viimeistely: Nitride

BROWNELLS 19LS LUISTI JA PIIPPU GLOCK 19

Asiakasarviot: 19LS piippu ja rautatähtäimille tarkoitettu luisti Gen 3

Rajoitukset

Top takeaways

Ominaisuudet

Tuotekuvaus

Asiakasarviot: 19LS piippu ja rautatähtäimille tarkoitettu luisti Gen 3

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

BROWNELLS
19LS LUISTI JA PIIPPU GLOCK 19