Yli 300 000 asiakasta - kiitämme teitä!

Yli 40 000 tuotetta metsästykseen ja ammuntaan

854014005304 430107560
Reaction Rod (7.62/.308) The Reaction Rod (7.62/.308) makes the removal and installation of barrels, flash hiders, gas blocks and hand guards much easier and simpler. The Reaction Rod is designed to be gripped in a bench vise so that the rod is either horizontal or vertical. The upper receiver is then slid onto the rod and the rod’s integral splines enter the barrel extension and secure the barrel extension from turning. This allows all the torque from barrel nut wrenches to go directly into the barrel extension. In contrast, receiver vise blocks transmit the turning force into the aluminum receiver, a good part of which passes through the small, easily distorted receiver index pin. With the Geissele Reaction Rod, marring of an upper receiver’s finish by gripping and twisting inside vise blocks is eliminated and so is the need to remove sights and mounts from the receiver’s M1913 rail. Specs Weight: 57 oz / 3.52 lbs Dimensions :12.80 × 1.80 × 1.50 in Designed for 7.62/.308 caliber SR25 Pattern, DPMS/LR308 Pattern, AR10 Pattern Upper Receivers. Compatible with: SR25 Pattern DPMS/LR308 Pattern AR10 Pattern Not Compatible with: DPMS G2 Pattern DD5 V4 .308 HK MR7.62 / HK417
319.9 319.9 1 EUR
Tuotenro: 430107560
GEISSELE AUTOMATICS AR-308 REACTION ROD
Valmistajan tuotenumero: 10-247 854014005304
319.9 EUR 0 319,90 € *
Ilmoita saatavuudesta
Loppu varastosta. Saatavuus ei tiedossa.
Ominaisuudet: Kaliiperi: 308 Winchester Merkki: AR .308

Ominaisuudet

Kaliiperi: 308 Winchester Valmistaja: AR .308 Toimituksen paino: 1,633kg Toimituksen korkeus: 38mm Toimituksen leveys: 38mm Toimituksen pituus: 330mm UPC : 854014005304

Tuotekuvaus

Made in USA

Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi




Tutustu AR-308 REACTION ROD:iin Geissele Automaticsilta! 🔧 Tehokas työkalu .308 Winchester kaliiperille.

Reaction Rod (7.62/.308) The Reaction Rod (7.62/.308) makes the removal and installation of barrels, flash hiders, gas blocks and hand guards much easier and simpler. The Reaction Rod is designed to be gripped in a bench vise so that the rod is either horizontal or vertical. The upper receiver is then slid onto the rod and the rod’s integral splines enter the barrel extension and secure the barrel extension from turning. This allows all the torque from barrel nut wrenches to go directly into the barrel extension. In contrast, receiver vise blocks transmit the turning force into the aluminum receiver, a good part of which passes through the small, easily distorted receiver index pin. With the Geissele Reaction Rod, marring of an upper receiver’s finish by gripping and twisting inside vise blocks is eliminated and so is the need to remove sights and mounts from the receiver’s M1913 rail. Specs Weight: 57 oz / 3.52 lbs Dimensions :12.80 × 1.80 × 1.50 in Designed for 7.62/.308 caliber SR25 Pattern, DPMS/LR308 Pattern, AR10 Pattern Upper Receivers. Compatible with: SR25 Pattern DPMS/LR308 Pattern AR10 Pattern Not Compatible with: DPMS G2 Pattern DD5 V4 .308 HK MR7.62 / HK417
Takaisin alkuun