Yli 300 000 asiakasta - kiitämme teitä!

Yli 40 000 tuotetta metsästykseen ja ammuntaan

EU2013016
199.9 449.9 68 EUR
Tuotenro: EU2013016
Full Length Die 7x64
Valmistajan tuotenumero: 3196411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4

ENG: Kuvaus

The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.

Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.

The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.

Ominaisuudet

Kierre: 1 1/4 Toimituksen paino: 0,65kg Toimituksen korkeus: 55mm Toimituksen leveys: 55mm Toimituksen pituus: 130mm

Automaattinen käännös

The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.

Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.

The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.



Tuotenro: EU2012994
Full Length Die 5,6x57
Valmistajan tuotenumero: 3026011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2012995
Full Length Die 5,6x61 S.E.v.H.
Valmistajan tuotenumero: 3026811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2012996
Full Length Die 224 Wea Mag
Valmistajan tuotenumero: 3070811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2012997
Full Length Die 6x62 Frères
Valmistajan tuotenumero: 3085611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2012998
Full Length Die 6x70 R
Valmistajan tuotenumero: 3086811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2012999
Full Length Die 6mm BR Rem
Valmistajan tuotenumero: 3088011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013000
Full Length Die 6mm Dasher
Valmistajan tuotenumero: 3088311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013001
Full Length Die 6mm PPC-USA
Valmistajan tuotenumero: 3096411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013002
Full Length Die 257 Wea Mag
Valmistajan tuotenumero: 3143611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013003
Full Length Die 6,5x50 R Reb
Valmistajan tuotenumero: 3148411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013004
Full Length Die 6,5x52 R
Valmistajan tuotenumero: 3150011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013005
Full Length Die 6,5x54 M-Sch
Valmistajan tuotenumero: 3152811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013006
Full Length Die 6,5x54 Mauser
Valmistajan tuotenumero: 3153211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013007
Full Length Die 6,5x57
Valmistajan tuotenumero: 3154011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013008
Full Length Die 6,5x64
Valmistajan tuotenumero: 3157211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013009
Full Length Die 6,5x64 Brenneke
Valmistajan tuotenumero: 3157611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013010
Full Length Die 6,5x65 RWS
Valmistajan tuotenumero: 3158411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013011
Full Length Die 6,5x68
Valmistajan tuotenumero: 3159611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013012
Full Length Die 6,5x68 R
Valmistajan tuotenumero: 3160411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013013
Full Length Die 6,5 PRC
Valmistajan tuotenumero: 3167011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013014
Full Length Die 6,5-284 Norma
Valmistajan tuotenumero: 3172811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013015
Full Length Die 7x57
Valmistajan tuotenumero: 3193611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013017
Full Length Die 7mm SE v.H.
Valmistajan tuotenumero: 3197211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013018
Full Length Die 7mm Blaser Mag
Valmistajan tuotenumero: 3199811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013019
Full Length Die 7mm PRC
Valmistajan tuotenumero: 3209011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013020
Full Length Die 7mm Rem Mag
Valmistajan tuotenumero: 3209211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013021
Full Length Die 7mm Rem SAUM
Valmistajan tuotenumero: 3209311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
334.9 EUR 0 334,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013022
Full Length Die 7mm WSM
Valmistajan tuotenumero: 3212611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013023
Full Length Die 7mm STW
Valmistajan tuotenumero: 3213611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
334.9 EUR 0 334,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013024
Full Length Die 7mm Wea Mag
Valmistajan tuotenumero: 3216011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013025
Full Length Die 7mm-08 Rem
Valmistajan tuotenumero: 3218411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013026
Full Length Die 270 Wea Mag
Valmistajan tuotenumero: 3225211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013027
Full Length Die 270 WSM
Valmistajan tuotenumero: 3226211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013028
Full Length Die 284 Win
Valmistajan tuotenumero: 3239211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013029
Full Length Die 7,62x39
Valmistajan tuotenumero: 3248411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013030
Full Length Die 300 Pegasus
Valmistajan tuotenumero: 3289411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013031
Full Length Die 300 PRC
Valmistajan tuotenumero: 3290011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013032
Full Length Die 300 Rem Ultra Mag.
Valmistajan tuotenumero: 3292211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013033
Full Length Die 300 Wea Mag
Valmistajan tuotenumero: 3292811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013034
Full Length Die 300 WSM
Valmistajan tuotenumero: 3293411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013035
Full Length Die 303 British
Valmistajan tuotenumero: 3293611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013036
Full Length Die 8x60 S
Valmistajan tuotenumero: 3323611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013037
Full Length Die 8x64 S
Valmistajan tuotenumero: 3326011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013038
Full Length Die 8x75 RS
Valmistajan tuotenumero: 3330411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013039
Full Length Die 8,5x63
Valmistajan tuotenumero: 3374811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013040
Full Length Die 338 Blaser Mag
Valmistajan tuotenumero: 3382911 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013041
Full Length Die 338 Federal
Valmistajan tuotenumero: 3383511 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013042
Full Length Die 338 Norma Mag
Valmistajan tuotenumero: 3384211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013043
Full Length Die 338 RCM
Valmistajan tuotenumero: 3385111 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013044
Full Length Die 338 Rem Ultra Mag
Valmistajan tuotenumero: 3385311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013045
Full Length Die 338 Win Mag
Valmistajan tuotenumero: 3385611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013046
Full Length Die 350 Mag Rigby
Valmistajan tuotenumero: 3439211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013047
Full Length Die 358 Win
Valmistajan tuotenumero: 3445611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013048
Full Length Die 9,3x64 Br
Valmistajan tuotenumero: 3459611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013049
Full Length Die 9,3x74 R
Valmistajan tuotenumero: 3463211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9 EUR 0 199,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013050
Full Length Die 375 Blaser Mag
Valmistajan tuotenumero: 3471811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013051
Full Length Die 378 Wea Mag
Valmistajan tuotenumero: 3484411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013052
Full Length Die 450/400 NE 3"
Valmistajan tuotenumero: 3535611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013053
Full Length Die 416 Rem Mag
Valmistajan tuotenumero: 3562411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013054
Full Length Die 416 Rigby
Valmistajan tuotenumero: 3562811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013055
Full Length Die 10,75x68
Valmistajan tuotenumero: 3572411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013056
Full Length Die 45-70 Gov't
Valmistajan tuotenumero: 3645211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013057
Full Length Die 458 Lott
Valmistajan tuotenumero: 3678011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
244.9 EUR 0 244,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013058
Full Length Die 470 NE
Valmistajan tuotenumero: 3694011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013059
Full Length Die 500 NE 3''
Valmistajan tuotenumero: 3718011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
294.9 EUR 0 294,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013060
Full Length Die 600 NE
Valmistajan tuotenumero: 3736411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
379.9 EUR 0 379,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4
Tuotenro: EU2013061
Full Length Die 700 H&H NE
Valmistajan tuotenumero: 3738411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
449.9 EUR 0 449,90 € *
Hankitaan toimittajalta tilauksesi jälkeen
Toimitusaika n. 4-12 viikkoa.
Ominaisuudet: Kierre: 1 1/4

TRIEBEL 1 1/4 Full Length Die 7x64 tarjoaa tarkkaa kalibrointia ja helpon käytön. 🔧 Osta nyt ja paranna ampumasi tarkkuutta!

Takaisin alkuun