If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.
Toimituksen paino: 0,03kg
Toimituksen korkeus: 99mm
Toimituksen leveys: 22mm
Toimituksen pituus: 191mm
UPC
: 661120658870
Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi