Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Materiaali: 7075 Alumiini Pinnoite: Mattamusta Hardcoat Kokonaispituus: 1.831" Kokonaisleveys: 1.062" Kiinnitysosat: (2) 8-32 Painonappipulttia, (1) 8-32 Kiinnitysruuvi Punapisteen yhteensopivuus: Vortex Razor, C-More RTS & STS Poista vain takasight aseestasi ja vaihda se kiinnitykseemme, jotta voit asentaa Vortex Razor, C-More RTS tai STS punapisteen. Muutoksia ei vaadita. Voit poistaa kiinnityksemme ja vaihtaa takasightisi milloin tahansa. Kiinnitysosat mukana. Asennusohjeet Poista takasight* Asenna EGW Sight Mount urakouruun Kiristä kiinnitysruuvi (jos sovellettavissa) Aseta punapiste EGW Sight Mountiin (pienellä paperipalasella punapisteen ja kiinnityksen väliin laittaminen helpottaa poistamista ja pitää Loctiten punapisteen ulkopuolella.) Levitä sinistä Loctitea mukana toimitettuihin kiinnitysruuveihin Kiristä kiinnitysruuvit 15in/lbs