Machined from a solid aluminum billet, charging handle drops in to standard AR-15/M16 uppers to offer exceptional strength and extremely consistent tolerances. Hardcoat anodized to resist wear and corrosion.
Koneistettu Billet Latauskahva Tarjoaa Kestävyyttä & Johdonmukaisia Toleransseja
Koneistettu kiinteästä alumiinibilletistä, latauskahva asettuu standardeihin AR-15/M16 yläosiin tarjoten poikkeuksellista kestävyyttä ja erittäin johdonmukaisia toleransseja. Hardcoat anodisoitu kulumisen ja korroosion estämiseksi.
TEKNISET TIEDOT: Koneistettu billettejä 6061 T6 alumiinia, hardcoat anodisoitu matta musta. 6 7/8"(17.5cm) pitkä. V1 lukko .56" (1.4cm) pitkä.
Ominaisuudet
Asetyyppi:AR-15
Käsi:Right
Viimeistely:Black
Toimituksen paino:0,045kg
Toimituksen korkeus:13mm
Toimituksen leveys:76mm
Toimituksen pituus:218mm
UPC:608938410832
Tuotekuvaus
Made in USA
USA:n vientiluvan tyyppi: 0A501.x
Asiakasarvostelut
Asiakasarviot (7)
2,9 / 5
Suosittelen ehdottomasti
I have purchased several quality product 19.11.2016
Suosittelen ehdottomasti
Good quality changing handle for the mon 3.11.2016
I noticed an old negative review on this product. I have used Core changing handles for quite a while on my custom builds. Good product no problems. Their extended model is a good value and I am purchasing a few more.
En suosittele
Core Billet Charging Handle 2.7.2015
This is by far the worst changing handle I have ever purchased. I will return for a full refund the quality is just not there. The charging handle was poorly machined rough and as sharp as you can get.
En suosittele
Rough 21.4.2014
The anodized finish is rough. The latch has a sharp edge that does not easily engage the upper. The latch spring is stronger than it needs to be. The latch does not easily disengage when pulling the charging handle back. I returned this charging handle.
En suosittele
Not Within Specs 23.2.2014
This charging handle is not in specs. Installed the part and it drags and snags in a few places. Pulled the charging handle to the rear maybe 10 times and the aluminum is already showing through on top of the charging handle as well as underneath to the read of the charging handle. I tried two other charging handles including a stock one that came with another AR and a BCM Gunfighter and neither had any problems in the upper.
Suosittelen ehdottomasti
Good Quality Charging Handle 16.12.2013
Fits Perfecly In My Delton Receiver..Good Quality And The Finish Is Perfect..Best Of All Made In The USA...
Suosittelen jossain määrin
Didn't fit 16.11.2013
The product quality and finish looked fine. However, the charging handle didn't fit in 2 out my 3 uppers. I bought it for use in a Stag Lefty upper as part of a build I'm doing for my wife. It didn't fit in there, so I tried swapping it out with one from my 20" Del Ton, where it also did not fit. I ended up swapping the charging handle from my LWRC M6A2, and it seems to work in there. Other than the fit issues, the handle appears to be well made. It didn't appear bent or otherwise compromised. I don't know if the bolt key channels in those particular uppers are a bit tight or what, but I made it work by shifting parts around, though I would have preferred to keep parts where they were, because I know they worked the way they were. I doubt this charging handle will compromise the reliabilty of the LWRC, but if it does, I'll use it to weigh my garbage can down.
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Huippulaatuiset jouset takaavat johdonmukaisen ja luotettavan sytytyksen sekä varman suorituskyvyn.
Tarjoavat alhaisen painon, joka on välttämätön puhtaan ja kevyen tuntuman saavuttamiseksi laukaisukoneistossa.
5 kappaleen pakkaus, teräksinen, paino 19 lb (tehtaan mukaan 23 lb).
Korkealaatuiset iskutapit, jotka vähentävät nallin virtauksen mahdollisuuksia ja varmistavat luotettavan sytytyksen vahvoilla jousilla.
Sopii Colt- ja Springfield Armory -mittojen mukaisiin liukuihin, erityisesti 9mm/.38 Super kaliipereille.
Valmistettu työkaluteräksestä ja ruostumattomasta teräksestä, sopii erityisesti Series 70/80 Colt ja Springfield, Inc. -malleille.
Luotettava 7 patruunan 1911 Government -lipas ruostumattomasta teräksestä, teräksisellä seuraajalla ja vahvalla jousituksella.
Mukana paksu ja ohut pohjalevy sekä ruuvit, jotka mahdollistavat mukautetun istuvuuden.
Saatavilla musta nitriitti- tai ruostumaton teräsviimeistely.
Valmistettu sertifioidusta hiiliteräksestä ja TIG-hitsattu saumattomasti, mikä parantaa kestävyyttä.
Kapasiteetti 15 patruunaa, yhteensopiva Sig Sauer P229 ja P228 mallien kanssa.
Monien eurooppalaisten käsiasevalmistajien alkuperäisenä varusteena toimittama lipas.