Helps You Fit The Standing Lugs On Oversized Barrels
Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.
SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.
Lisää...
Auttaa sopii pysyvän Korvakkeet ylimitoitettu tynnyriä
BROWNELLS sovitussarjan avulla asennat 1911 pistoolien piiput paikoilleen. Käytetään ylikokoisten piippujen tarkkaan yhteensovitukseen luistin kanssa.
tiedot: tynnyri haltija - teräs. Noin 3,5"(9cm) kauan. 44" (1.1 cm) od tynnyri Lug Cutter - Carbide. . 186" cutter ja. 195" cutter; sisältää kahva. Työnnä pusher-teräs akseli, elastinen muovikahva. 6,5"(16,5 cm) pitkä
Lisää...
Asiakasarviot: BROWNELLS 1911 AUTO LUG FITTING KIT
Arvioiden lukumäärä: 3
Arvostelut brownells.com sivustolla: 3
Arvioiden keskiarvo: 4,7
Works SPLENDIDLY!(1.3.2011)
I used this kit to fit a "drop-in" match barrel that wasn't quite so drop-in. When used with care and per the instructions, this kit provides a very tight barrel-to-slide lock-up that pleasingly "snicks" into battery during that last little bit of forward slide movement. I used the .186 cutter and polished by hand for the perfect fit. Enables the hobbyist gunsmith to fit a barrel just like a pro. You'll likely need a longer barrel link for best results, so I also recommend buying a packaged set of links containing various lengths. Rather than using the furnished slide pusher, I just applied steady pressure with my thumb on the back of the slide until it aligned perfectly with the back of the frame. A very slick tool.
lug fitting kit(2.11.2015)
does what it should ,haven' t used the slide pusher. Have not used the guide, rod every slide I worked with of late was cut for a reverse plug
Right tool for proper lug fitting.(20.5.2011)
Makes the job of fitting up an accurate 1911 a snap.
Tuotenro: 080000089 BROWNELLS 1911 AUTO LUG FITTING KIT050806005242BROWNELLS sovitussarjan avulla asennat 1911 pistoolien piiput paikoilleen. Käytetään ylikokoisten piippujen tarkkaan yhteensovitukseen luistin kanssa. BROWNELLS sovitussarjan avulla asennat 1911 pistoolien piiput paikoilleen. Käytetään ylikokoisten piippujen tarkkaan yhteensovitukseen luistin kanssa.
294.9EUR0294,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Helps You Fit The Standing Lugs On Oversized Barrels
Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.
SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.
Lisää...
Auttaa sopii pysyvän Korvakkeet ylimitoitettu tynnyriä
BROWNELLS sovitussarjan avulla asennat 1911 pistoolien piiput paikoilleen. Käytetään ylikokoisten piippujen tarkkaan yhteensovitukseen luistin kanssa.
tiedot: tynnyri haltija - teräs. Noin 3,5"(9cm) kauan. 44" (1.1 cm) od tynnyri Lug Cutter - Carbide. . 186" cutter ja. 195" cutter; sisältää kahva. Työnnä pusher-teräs akseli, elastinen muovikahva. 6,5"(16,5 cm) pitkä
Lisää...
Asiakasarviot: BROWNELLS 1911 AUTO LUG FITTING KIT
Arvioiden lukumäärä: 3
Arvostelut brownells.com sivustolla: 3
Arvioiden keskiarvo: 4,7
Works SPLENDIDLY!(1.3.2011)
I used this kit to fit a "drop-in" match barrel that wasn't quite so drop-in. When used with care and per the instructions, this kit provides a very tight barrel-to-slide lock-up that pleasingly "snicks" into battery during that last little bit of forward slide movement. I used the .186 cutter and polished by hand for the perfect fit. Enables the hobbyist gunsmith to fit a barrel just like a pro. You'll likely need a longer barrel link for best results, so I also recommend buying a packaged set of links containing various lengths. Rather than using the furnished slide pusher, I just applied steady pressure with my thumb on the back of the slide until it aligned perfectly with the back of the frame. A very slick tool.
lug fitting kit(2.11.2015)
does what it should ,haven' t used the slide pusher. Have not used the guide, rod every slide I worked with of late was cut for a reverse plug
Right tool for proper lug fitting.(20.5.2011)
Makes the job of fitting up an accurate 1911 a snap.