Yli 300 000 asiakasta - kiitämme teitä!

Yli 40 000 tuotetta metsästykseen ja ammuntaan

840815119333 100029337
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Magpul’s lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in the U.S.A. FEATURES Designed for streamlined storage until deployment Folded, the sleek housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide Leg extensions slide and lock securely with the push of a button and a tool-less knurled bipod locking knob allows easy adjustment between shots Legs extend from 6.8” to 10.3” with seven locking detents Spring-tensioned legs stow forward when not in use, and then quickly snap down and lock into place with one hand Legs accept most Atlas pattern bipod replaceable feet to best match the needs of your environment SPECS Attachment: 1913 Picatinny Rails Materials: Steel, Mil-Spec hard anodized 6061 T-6 aluminum, polymer Height, max: 10.45"" Pan and Tilt: 50° tilt and 40° pan Weight: 11 oz.
174.9 179.9 2 EUR
Tuotenro: 100029337
Pituus 6.3-10.3", musta, picatinny
Valmistajan tuotenumero: MAG941-BLK 840815119333
179.9 EUR 0 179,90 € *
Toimitusaika noin 5-7 päivää.
Enemmän kuin 10 kpl. Euroopan varastossa
Ominaisuudet: Attachment: Picatinny Feet Material: Rubber Folding: Yes Korkeus: 6.3 to 10.3 Paino: 11.0 oz Tyyppi: Swivel Väri: Black

Ominaisuudet

Attachment: Picatinny Feet Material: Rubber Folding: Yes Korkeus: 6.3 to 10.3 Paino: 11.0 oz Tyyli: Swivel Väri: Black Toimituksen paino: 0,454kg Toimituksen korkeus: 74mm Toimituksen leveys: 99mm Toimituksen pituus: 241mm UPC : 840815119333

Tuotekuvaus

Made in USA



Tuotenro: 100029338
Pituus 6.3-10.3", ruskea, picatinny
Valmistajan tuotenumero: MAG941-FDE 840815119340
174.9 EUR 72 174,90 € *
Toimitusaika noin 5-7 päivää.
4 kpl. Euroopan varastossa
Yli 10 kpl. USA:n varastossa
Ominaisuudet: Attachment: Picatinny Feet Material: Rubber Folding: Yes Korkeus: 6.3 to 10.3 Paino: 11.0 oz Tyyppi: Swivel Väri: Flat Dark Earth

Tutustu MAGPUL bipodiin (6.3-10.3"), musta, picatinny-kiinnityksellä. Kestävä ja helposti säädettävä! 🏹

The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Magpul’s lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in the U.S.A. FEATURES Designed for streamlined storage until deployment Folded, the sleek housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide Leg extensions slide and lock securely with the push of a button and a tool-less knurled bipod locking knob allows easy adjustment between shots Legs extend from 6.8” to 10.3” with seven locking detents Spring-tensioned legs stow forward when not in use, and then quickly snap down and lock into place with one hand Legs accept most Atlas pattern bipod replaceable feet to best match the needs of your environment SPECS Attachment: 1913 Picatinny Rails Materials: Steel, Mil-Spec hard anodized 6061 T-6 aluminum, polymer Height, max: 10.45"" Pan and Tilt: 50° tilt and 40° pan Weight: 11 oz.
Takaisin alkuun