Tough, molded nylon magazine coupler binds a backup magazine directly to the mag in the gun for lightning fast tactical reloads without moving your trigger hand. Three, steel bolts let you adjust retention force, so the magazines won’t slip out even during vigorous combat maneuvers. Side-by-side configuration with staggered heights, plus fixed standoff points between the compartments further ensure the magazines won’t shift position or rattle. Includes a Top Round Protector (TRP) to protect the feed lips of the backup mag, prevent accidental dislodgement of the top round, and keep out dirt. TRP instantly detaches by applying downward thumb pressure on the release tab while pushing forward. Rubber retention strap keeps TRP from getting lost.
Pitää Varalippaan Valmiina Välittömään Uudelleenlataukseen
Kestävästä muovatusta nailonista valmistettu lippaan yhdistäjä sitoo varalippaan suoraan aseessa olevaan lippaaseen salamannopeita taktisia latauksia varten ilman, että sinun tarvitsee siirtää laukaisusormeasi. Kolme teräsboltia mahdollistavat pidon säätämisen, joten lippaat eivät liu'u pois edes voimakkaiden taisteluliikkeiden aikana. Lippaat ovat vierekkäin porrastetuin korkeuksin, ja kiinteät välikkeet osastojen välillä varmistavat, että lippaat eivät siirry paikoiltaan tai kilise. Pakettiin sisältyy Top Round Protector (TRP) suojatakseen varalippaan syöttöhuulia, estääkseen yläpuolella olevan patruunan tahattoman irtoamisen ja pitääkseen lian ulkopuolella. TRP irtoaa välittömästi painamalla vapautustappia alaspäin peukalolla samalla työntäen eteenpäin. Kumista valmistettu pidikeremmi pitää TRP:n tallessa.
TEKNISET TIEDOT: Valmistettu muovatusta nailonista, musta, teräksisillä jännityksen säätöruuveilla. Pituus 2¾” (7cm), leveys 2-7⁄16" (6.2cm), korkeus 3¼” (8.3cm).
Arvioiden lukumäärä: 9
Arvostelut brownells.com sivustolla: 9
Arvioiden keskiarvo: 3,9
Great product for the money(9.11.2009)
Works well, holds mags tightly together, and having a flip off top cover for the auxillary mag is a nice feature.
Not for 20 round magazines(9.1.2010)
Was purchased for departmental 20 round magazines and will not work reliably for them. Did not try with 30 round magazines, we do not use them.
Nice(10.4.2010)
Works nicely with my H&K high quality 30 rds mags, only disanvantage is you should check regularly the tightening screws -> comes loose from time to time.
Also "auto-fits" the mags in correct height regarding each other -> you don't have to check if the other (right side) mag blocks out the ejecting port of your gun; this is automatically adjusted which is a nice feature.
Great Product(16.4.2010)
Works exactly as intended. Holds two mags firmly in place. Offsets them perfectly to not block ejection port. Mags do not move over time and get out of alignment since the coupler is molded to hold them in proper alignment and does not rely on screw pressure alone.
The smooth rounded bottom is also a blessing when doing numerous mag changes and smacking the bottom of the mags to ensure a positive seat. Smack the bottom of square sharp metal mags for a few days straight and you'll welcome the smooth bottom of this coupler.
I highly recommend these things to everyone I talk to.
WILL NOT FIT PMAGS(5.7.2011)
This will not fit pmags. Brownells really should put this info on the product page in all CAPS!
great product(18.7.2011)
great product. I've tried a lot of different couplers and this is by far my favorite. Quality materials, easy set up, holds mags tight, really like the design of the top cover. The guy who gave it a low score should actually look at the product photo, obvious it's not made for p mags.
Great Product For Military 30 Round Mags(28.9.2011)
Bought several for on duty and off duty use for my AR15's. Put a thousand rounds through with no issues.
The Best Mag Coupler I Have Used(12.11.2011)
I have used quite a bit of devices that clamp or otherwise hold 2 mags together. This is probably the best one. YES it works and NO it doesn't work on PMAGS. Rock solid hold and very tough! Well worth the price.
Great Coupler but not for DPMS AR .308(24.8.2017)
I actually ordered this product for a custom AR .308 which uses DPMS style metal magazines which I found this coupler was much too small for, however; I did find it fit my Beretta ARX-160 .22 magazines perfectly so I now use it for that purpose instead. The coupler is a little difficult to adjust because of it's use of long screws which require a screwdriver and some finesse which is not something I want to be doing in the middle of combat. Good thing is though once it's on, it's on and doesn't need adjusting unless your magazine completely fails and you need to swap the magazine out of the coupler.
Tuotenro: 080000511 BROWNELLS AR-15/M16 MAGAZINE COUPLER Kestävästä muovatusta nailonista valmistettu lippaan yhdistäjä sitoo varalippaan suoraan aseessa olevaan lippaaseen salamannopeita taktisia latauksia varten ilman, että sinun tarvitsee siirtää laukaisusormeasi. Kolme teräsboltia mahdollistavat pidon säätämisen, joten lippaat eivät liu'u pois edes voimakkaiden taisteluliikkeiden aikana. Lippaat ovat vierekkäin porrastetuin korkeuksin, ja kiinteät välikkeet osastojen välillä varmistavat, että lippaat eivät siirry paikoiltaan tai kilise. Pakettiin sisältyy Top Round Protector (TRP) suojatakseen varalippaan syöttöhuulia, estääkseen yläpuolella olevan patruunan tahattoman irtoamisen ja pitääkseen lian ulkopuolella. TRP irtoaa välittömästi painamalla vapautustappia alaspäin peukalolla samalla työntäen eteenpäin. Kumista valmistettu pidikeremmi pitää TRP:n tallessa.
29.9EUR029,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Made in USA
USA:n vientiluvan tyyppi: 0A501.x
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti
Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi
Kestävä AR-15/M16 lippaan yhdistäjä 🚀 mahdollistaa nopean lataamisen ja varmistaa lippaat paikoillaan. Tilaa nyt!
Tough, molded nylon magazine coupler binds a backup magazine directly to the mag in the gun for lightning fast tactical reloads without moving your trigger hand. Three, steel bolts let you adjust retention force, so the magazines won’t slip out even during vigorous combat maneuvers. Side-by-side configuration with staggered heights, plus fixed standoff points between the compartments further ensure the magazines won’t shift position or rattle. Includes a Top Round Protector (TRP) to protect the feed lips of the backup mag, prevent accidental dislodgement of the top round, and keep out dirt. TRP instantly detaches by applying downward thumb pressure on the release tab while pushing forward. Rubber retention strap keeps TRP from getting lost.
Pitää Varalippaan Valmiina Välittömään Uudelleenlataukseen
Kestävästä muovatusta nailonista valmistettu lippaan yhdistäjä sitoo varalippaan suoraan aseessa olevaan lippaaseen salamannopeita taktisia latauksia varten ilman, että sinun tarvitsee siirtää laukaisusormeasi. Kolme teräsboltia mahdollistavat pidon säätämisen, joten lippaat eivät liu'u pois edes voimakkaiden taisteluliikkeiden aikana. Lippaat ovat vierekkäin porrastetuin korkeuksin, ja kiinteät välikkeet osastojen välillä varmistavat, että lippaat eivät siirry paikoiltaan tai kilise. Pakettiin sisältyy Top Round Protector (TRP) suojatakseen varalippaan syöttöhuulia, estääkseen yläpuolella olevan patruunan tahattoman irtoamisen ja pitääkseen lian ulkopuolella. TRP irtoaa välittömästi painamalla vapautustappia alaspäin peukalolla samalla työntäen eteenpäin. Kumista valmistettu pidikeremmi pitää TRP:n tallessa.
TEKNISET TIEDOT: Valmistettu muovatusta nailonista, musta, teräksisillä jännityksen säätöruuveilla. Pituus 2¾” (7cm), leveys 2-7⁄16" (6.2cm), korkeus 3¼” (8.3cm).
Arvioiden lukumäärä: 9
Arvostelut brownells.com sivustolla: 9
Arvioiden keskiarvo: 3,9
Great product for the money(9.11.2009)
Works well, holds mags tightly together, and having a flip off top cover for the auxillary mag is a nice feature.
Not for 20 round magazines(9.1.2010)
Was purchased for departmental 20 round magazines and will not work reliably for them. Did not try with 30 round magazines, we do not use them.
Nice(10.4.2010)
Works nicely with my H&K high quality 30 rds mags, only disanvantage is you should check regularly the tightening screws -> comes loose from time to time.
Also "auto-fits" the mags in correct height regarding each other -> you don't have to check if the other (right side) mag blocks out the ejecting port of your gun; this is automatically adjusted which is a nice feature.
Great Product(16.4.2010)
Works exactly as intended. Holds two mags firmly in place. Offsets them perfectly to not block ejection port. Mags do not move over time and get out of alignment since the coupler is molded to hold them in proper alignment and does not rely on screw pressure alone.
The smooth rounded bottom is also a blessing when doing numerous mag changes and smacking the bottom of the mags to ensure a positive seat. Smack the bottom of square sharp metal mags for a few days straight and you'll welcome the smooth bottom of this coupler.
I highly recommend these things to everyone I talk to.
WILL NOT FIT PMAGS(5.7.2011)
This will not fit pmags. Brownells really should put this info on the product page in all CAPS!
great product(18.7.2011)
great product. I've tried a lot of different couplers and this is by far my favorite. Quality materials, easy set up, holds mags tight, really like the design of the top cover. The guy who gave it a low score should actually look at the product photo, obvious it's not made for p mags.
Great Product For Military 30 Round Mags(28.9.2011)
Bought several for on duty and off duty use for my AR15's. Put a thousand rounds through with no issues.
The Best Mag Coupler I Have Used(12.11.2011)
I have used quite a bit of devices that clamp or otherwise hold 2 mags together. This is probably the best one. YES it works and NO it doesn't work on PMAGS. Rock solid hold and very tough! Well worth the price.
Great Coupler but not for DPMS AR .308(24.8.2017)
I actually ordered this product for a custom AR .308 which uses DPMS style metal magazines which I found this coupler was much too small for, however; I did find it fit my Beretta ARX-160 .22 magazines perfectly so I now use it for that purpose instead. The coupler is a little difficult to adjust because of it's use of long screws which require a screwdriver and some finesse which is not something I want to be doing in the middle of combat. Good thing is though once it's on, it's on and doesn't need adjusting unless your magazine completely fails and you need to swap the magazine out of the coupler.