Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.
Liukas Teflon~ Pinnoite Erittäin Sujuvaan Toimintaan
Lataa panokset helposti käyttämällä tätä sotilastyylistä latauskahvaa, joka on valmis asennettavaksi mihin tahansa mil-spec ylävastaanottimeen. Tarkkuuskoneistettu kestävästä, mutta kevyestä 6061 T6 alumiinista ja sen jälkeen kovapinnoitettu kulutusta kestävälle pinnalle, joka lisää lujuutta. Lopullinen Teflon®-pinnoite tarjoaa liukkaan, itsevoitelevan pinnan erittäin sujuvaa toimintaa varten.
TEKNISET TIEDOT: 6061 T6 alumiinia, kovapinnoitettu, mattamusta. 67⁄8" (17,5 cm) pitkä. Sopii mil-spec AR-15/M16 ylävastaanottimiin.
Lisää...
Asiakasarviot: DOUBLE STAR CHARGING HANDLE ASSEMBLY
Arvioiden lukumäärä: 12
Arvostelut brownells.com sivustolla: 12
Arvioiden keskiarvo: 1,8
you get what you pay for(27.8.2010)
i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it
Good price(19.4.2011)
It does the job and for a great price
Nice charging handle(12.5.2011)
Fit is good. Love the Double Star logo. A great value.
Too flexible(18.10.2013)
This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.
low quality control(2.11.2013)
Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...
Not compatible(21.11.2013)
This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.
no problems(25.1.2014)
a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues
not so hot(1.12.2014)
This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.
Get one that is made of 7075 aluminum.
It came as part of a kit, but I'll try to return it.
Buyer Beware!(18.6.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.
[CAUTION](1.9.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.
Pure Junk(3.12.2016)
I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.
Binding up from the start(21.2.2017)
Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.
Tuotenro: 100004996 DOUBLE STAR CHARGING HANDLE ASSEMBLY Valmistajan tuotenumero: AR460841348103851 Lataa panokset helposti käyttämällä tätä sotilastyylistä latauskahvaa, joka on valmis asennettavaksi mihin tahansa mil-spec ylävastaanottimeen. Tarkkuuskoneistettu kestävästä, mutta kevyestä 6061 T6 alumiinista ja sen jälkeen kovapinnoitettu kulutusta kestävälle pinnalle, joka lisää lujuutta. Lopullinen Teflon®-pinnoite tarjoaa liukkaan, itsevoitelevan pinnan erittäin sujuvaa toimintaa varten.
Sotilastyylistä latauskahvaa, joka sopii mil-spec AR-15/M16 ylävastaanottimiin.
Valmistettu kestävästä ja kevyestä 6061 T6 alumiinista, kovapinnoitettu ja Teflon®-pinnoitettu sujuvaa toimintaa varten.
Tekniset tiedot: 6061 T6 alumiinia, mattamusta, 17,5 cm pitkä.
Ominaisuudet
Käsi:
Right
Valmistaja:
AR-15
Viimeistely:
Matte Black
Toimituksen paino: 0,068kgToimituksen korkeus: 38mmToimituksen leveys: 124mmToimituksen pituus: 251mm
UPC
: 841348103851
Tuotekuvaus
Made in USA
USA:n vientiluvan tyyppi: 0A501.x
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Koe sujuva lataus AR-15:llä! 🔧 Tämä Double Star latauskahva on kestävä ja helppo asentaa mil-spec ylävastaanottimiin.
Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.
Liukas Teflon~ Pinnoite Erittäin Sujuvaan Toimintaan
Lataa panokset helposti käyttämällä tätä sotilastyylistä latauskahvaa, joka on valmis asennettavaksi mihin tahansa mil-spec ylävastaanottimeen. Tarkkuuskoneistettu kestävästä, mutta kevyestä 6061 T6 alumiinista ja sen jälkeen kovapinnoitettu kulutusta kestävälle pinnalle, joka lisää lujuutta. Lopullinen Teflon®-pinnoite tarjoaa liukkaan, itsevoitelevan pinnan erittäin sujuvaa toimintaa varten.
TEKNISET TIEDOT: 6061 T6 alumiinia, kovapinnoitettu, mattamusta. 67⁄8" (17,5 cm) pitkä. Sopii mil-spec AR-15/M16 ylävastaanottimiin.
Lisää...
Asiakasarviot: DOUBLE STAR CHARGING HANDLE ASSEMBLY
Arvioiden lukumäärä: 12
Arvostelut brownells.com sivustolla: 12
Arvioiden keskiarvo: 1,8
you get what you pay for(27.8.2010)
i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it
Good price(19.4.2011)
It does the job and for a great price
Nice charging handle(12.5.2011)
Fit is good. Love the Double Star logo. A great value.
Too flexible(18.10.2013)
This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.
low quality control(2.11.2013)
Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...
Not compatible(21.11.2013)
This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.
no problems(25.1.2014)
a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues
not so hot(1.12.2014)
This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.
Get one that is made of 7075 aluminum.
It came as part of a kit, but I'll try to return it.
Buyer Beware!(18.6.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.
[CAUTION](1.9.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.
Pure Junk(3.12.2016)
I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.
Binding up from the start(21.2.2017)
Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.
Apu ja yhteydenotto
(0) 
Uutiskirje
Perinteinen näkymä
Mobiilinäkymä