Plastic segmented rods fit into AR-15 gas ports and help you find correct alignment between barrel and gas block. Rods come in 6-paks, and in different lengths and diameters to fit the different gas port specs used by various manufacturers. Segmented construction lets you break the rod off with standard cleaning rod, and high-visibility orange color makes it easy to verify both portions are out of the gas system and barrel. Available in .22 Cal for .223/5.56 and .30 Cal for all calibers from .223/5.56 up to .30 caliber. Includes instructions.
Lisää...
Tekee Kaasulohkon Täydellisen Linjauksen Helpoksi
Muoviset segmentoidut tangot sopivat AR-15:n kaasuportteihin ja auttavat löytämään oikean linjauksen piipun ja kaasulohkon välillä. Tangot tulevat 6 kappaleen pakkauksissa, ja ne ovat saatavilla eri pituuksina ja halkaisijoina sopimaan eri valmistajien käyttämiin kaasuportin mittoihin. Segmentoitu rakenne mahdollistaa tangon katkaisemisen tavallisella puhdistustangolla, ja korkeanäkyvyyden oranssi väri tekee siitä helppoa varmistaa, että molemmat osat ovat poissa kaasujärjestelmästä ja piipusta. Saatavilla .22 Cal koossa .223/5.56 ja .30 Cal kaikille kaliibereille .223/5.56:sta aina .30 kaliiberiin asti. Sisältää ohjeet.
Lisää...
Asiakasarviot: UNIQUETEK GAS BLOCK ALIGNER 30 CALIBER
Arvioiden lukumäärä: 4
Arvostelut brownells.com sivustolla: 4
Arvioiden keskiarvo: 3
Gas Block Aligner Tool(27.9.2015)
Takes all the guess work out of gas block alignment, especially for a clamp on gas block. Watch the online video from the included instructions, it really is a brilliant tool. Very easy to use and works as advertised. This was my first gas block upgrade, I took my time and was very careful so it took me about 30 minutes. However, after having used this aligner I'm confident that I could do it again in literally minutes.
Didn't work.(9.1.2016)
Colt M4 LE6920. Even after cleaning out the carbon in the port, the smallest size alignment tool would not go in the port.
Worthless. Good idea, poor execution.
Great idea, didnât work(4.2.2018)
I followed the instructions provided in the video provided by brownells. It seemed like a great idea and I was aligning a fbs I thought it would work great. I found the correct pin which was the smallest, put it in the barrel, slipped the fbs over , flipped the assembly over and it worked. Got it aligned, but then when I tried to remove it the pin wouldnât drop back down! I loosened the fbs thinking it was jammed against the wall, nothing! No matter what I sit I would the pin would not drop! I eventually had to pull the fbs off the barrel breaking the plastic pin. Very upset I paid almost $10 for a one use piece of plastic that didnât even work! Maybe I did something wrong but I am not happy with this product!
Great tool - beats guessing(9.3.2018)
Did my first two AR's tonight using this gadget. One was a heavy/bull barrel and other was a standard .750. Both gas blocks were vintage with rails built in. Read the instructions, watched a couple videos on YouTube then got going. Cleaned out the barrel ports per instructions. Dropped in the little sticks which went without a hitch. I did discover one gas block was generously sized so I had to pick the best "middle" position. Both fell into place and blocks tightened. Both snapped off easily with a cleaning rod.
This is much cheaper than buying a bore scope and certainly much better than guessing by eye and hoping the holes are lined up. Highly recommend and will be buying more of these.
Tuotenro: 100015041 UNIQUETEK GAS BLOCK ALIGNER 30 CALIBER Valmistajan tuotenumero: CT151130 Muoviset segmentoidut tangot sopivat AR-15:n kaasuportteihin ja auttavat löytämään oikean linjauksen piipun ja kaasulohkon välillä. Tangot tulevat 6 kappaleen pakkauksissa, ja ne ovat saatavilla eri pituuksina ja halkaisijoina sopimaan eri valmistajien käyttämiin kaasuportin mittoihin. Segmentoitu rakenne mahdollistaa tangon katkaisemisen tavallisella puhdistustangolla, ja korkeanäkyvyyden oranssi väri tekee siitä helppoa varmistaa, että molemmat osat ovat poissa kaasujärjestelmästä ja piipusta. Saatavilla .22 Cal koossa .223/5.56 ja .30 Cal kaikille kaliibereille .223/5.56:sta aina .30 kaliiberiin asti. Sisältää ohjeet.
23.9EUR1023,90 €
*
Toimitusaika noin 2-4 viikkoa. Yli 10 kpl. USA:n varastossa
Tuotenro: 100015040 UNIQUETEK GAS BLOCK ALIGNER 22 CALIBER Valmistajan tuotenumero: CT151122 Muoviset segmentoidut tangot sopivat AR-15:n kaasuportteihin ja auttavat löytämään oikean linjauksen piipun ja kaasulohkon välillä. Tangot tulevat 6 kappaleen pakkauksissa, ja ne ovat saatavilla eri pituuksina ja halkaisijoina sopimaan eri valmistajien käyttämiin kaasuportin mittoihin. Segmentoitu rakenne mahdollistaa tangon katkaisemisen tavallisella puhdistustangolla, ja korkeanäkyvyyden oranssi väri tekee siitä helppoa varmistaa, että molemmat osat ovat poissa kaasujärjestelmästä ja piipusta. Saatavilla .22 Cal koossa .223/5.56 ja .30 Cal kaikille kaliibereille .223/5.56:sta aina .30 kaliiberiin asti. Sisältää ohjeet.
Plastic segmented rods fit into AR-15 gas ports and help you find correct alignment between barrel and gas block. Rods come in 6-paks, and in different lengths and diameters to fit the different gas port specs used by various manufacturers. Segmented construction lets you break the rod off with standard cleaning rod, and high-visibility orange color makes it easy to verify both portions are out of the gas system and barrel. Available in .22 Cal for .223/5.56 and .30 Cal for all calibers from .223/5.56 up to .30 caliber. Includes instructions.
Lisää...
Tekee Kaasulohkon Täydellisen Linjauksen Helpoksi
Muoviset segmentoidut tangot sopivat AR-15:n kaasuportteihin ja auttavat löytämään oikean linjauksen piipun ja kaasulohkon välillä. Tangot tulevat 6 kappaleen pakkauksissa, ja ne ovat saatavilla eri pituuksina ja halkaisijoina sopimaan eri valmistajien käyttämiin kaasuportin mittoihin. Segmentoitu rakenne mahdollistaa tangon katkaisemisen tavallisella puhdistustangolla, ja korkeanäkyvyyden oranssi väri tekee siitä helppoa varmistaa, että molemmat osat ovat poissa kaasujärjestelmästä ja piipusta. Saatavilla .22 Cal koossa .223/5.56 ja .30 Cal kaikille kaliibereille .223/5.56:sta aina .30 kaliiberiin asti. Sisältää ohjeet.
Lisää...
Asiakasarviot: UNIQUETEK GAS BLOCK ALIGNER 30 CALIBER
Arvioiden lukumäärä: 4
Arvostelut brownells.com sivustolla: 4
Arvioiden keskiarvo: 3
Gas Block Aligner Tool(27.9.2015)
Takes all the guess work out of gas block alignment, especially for a clamp on gas block. Watch the online video from the included instructions, it really is a brilliant tool. Very easy to use and works as advertised. This was my first gas block upgrade, I took my time and was very careful so it took me about 30 minutes. However, after having used this aligner I'm confident that I could do it again in literally minutes.
Didn't work.(9.1.2016)
Colt M4 LE6920. Even after cleaning out the carbon in the port, the smallest size alignment tool would not go in the port.
Worthless. Good idea, poor execution.
Great idea, didnât work(4.2.2018)
I followed the instructions provided in the video provided by brownells. It seemed like a great idea and I was aligning a fbs I thought it would work great. I found the correct pin which was the smallest, put it in the barrel, slipped the fbs over , flipped the assembly over and it worked. Got it aligned, but then when I tried to remove it the pin wouldnât drop back down! I loosened the fbs thinking it was jammed against the wall, nothing! No matter what I sit I would the pin would not drop! I eventually had to pull the fbs off the barrel breaking the plastic pin. Very upset I paid almost $10 for a one use piece of plastic that didnât even work! Maybe I did something wrong but I am not happy with this product!
Great tool - beats guessing(9.3.2018)
Did my first two AR's tonight using this gadget. One was a heavy/bull barrel and other was a standard .750. Both gas blocks were vintage with rails built in. Read the instructions, watched a couple videos on YouTube then got going. Cleaned out the barrel ports per instructions. Dropped in the little sticks which went without a hitch. I did discover one gas block was generously sized so I had to pick the best "middle" position. Both fell into place and blocks tightened. Both snapped off easily with a cleaning rod.
This is much cheaper than buying a bore scope and certainly much better than guessing by eye and hoping the holes are lined up. Highly recommend and will be buying more of these.