Korisi on tyhjä.

Ostoskori

Apu ja yhteydenotto

Ilmainen toimitus yli 250€ perustoimituksille

100:n päivän palautusoikeus

Uutiskirje

Tarjoukset

Yli 300 000 asiakasta - kiitämme teitä!

4,93/5 "Erittäin hyvä" (1400+ arvostelua)

Yli 40 000 tuotetta metsästykseen ja ammuntaan

MAGPUL
AR-15/308 AR PRS GEN 3 PRECISION SÄÄDETTÄVÄ PERÄ

840815109594 100018765

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting. Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included) Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents Steel adjustment shafts finished with melonite for wear and corrosion resistance All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible) NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.

Lisää...

Asiakasarviot: Magpul PRS Gen3 perä, musta

Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 4,8

PRS upgrade (5.12.2017)

This is a excellent upgrade to my ruger precision rifle. I highly recommend it for that purpose.

Worth the wait! (14.8.2018)

Purchased this stock to complete a 24â heavy barreled AR-15. It is very solidly built with precise adjustments, well engineered and easy to install. Makes a tremendous difference in how the rifle handles and shoots, The stock is better than I anticipated and Iâll need to purchase another one for my Ruger Precision Rifle. A note about Brownells service; I ordered this stock several months ago on sale and with a free shipping offer. It along with another part were both backordered. Brownells honored the prices and shipped each piece as it arrive in stock free. Brownells service is the best in the industry,

Glad I bought it. (13.5.2017)

I originally purchased this stock more because it seemed like the thing to have on a rifle intended for intermediate range precision shooting than for an obvious need. As it turned out, though, itâs not just a pretty face. 1. Itâs very solid and a nice change back to a traditional rifle feel as compared with more common sliding stocks. 2. The ability to attach a Picatinny rail section to the bottom is a convenience in mounting a monopod, but unlike the earlier generation PRS, the rail isnât there if itâs not needed. 3. Both length of pull and cheek rest are adjusted with sturdy knobs. I have not yet tried the cant feature and the length of pull is more quickly adjusted with a conventional sliding stock, but the PRS LOP is adjustable in much finer increments. 4. What I really like is the adjustable cheek rest. Iâm accustomed to mounting optics on my AR-type rifles and making do by changing the position of my head to achieve a proper sight picture. Prior to changing the PRS cheek rest position, my eye was almost in line with the center of the scope Iâm using, but not quite. Not much adjustment of the PRS rest was necessary, but it made a significant difference. Now when I get on the rifle, and especially when I mount it quickly, itâs aligned just right. Not only does that help ensure a good sight picture, it helps eliminate parallax problems at close distances.

Good enough... (14.9.2017)

Picked this stock for my LR-308 6.5CM build, adjustment knob clicks are very positive feeling, She's a little on the heavy side but Magpul don't say its light.

Simply The Best (9.9.2018)

My second Magpul PRS, this one for a Ruger Precision Rifle. Very simple installation with the carbine buffer tube, very well made, positive adjustments that stay put when using the rifle in the field, clean lines that donât snag on stuff like the factory stock, much better shape when using a rear bag. This is the stock Ruger might consider for the next generation of the Precision rifle.

Lue 5 arvostelua lisää brownells.com sivustolla

344.9 364.9 4 EUR

Tuotenro: 100018765
Magpul PRS Gen3 perä, musta
Valmistajan tuotenumero: MAG672-BLK 840815109594 Magpul PRS (Precision Rifle/Sniper) Gen3 säädettävä perä AR-15 kivääreihin. Magpul PRS (Precision Rifle/Sniper) Gen3 säädettävä perä AR-15 kivääreihin.

344.9 EUR 53 344,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Materiaali: Polymer Merkki: AR-15 Tyyppi: Adjustable Tyyppi: Rifle Length Väri: Black

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Kuvaus

Magpul PRS (Precision Rifle/Sniper) Gen3 säädettävä perä AR-15 kivääreihin.

Ominaisuudet

Materiaali: Polymer Tyyli: Adjustable Tyyppi: Rifle Length Valmistaja: AR-15 Väri: Black Toimituksen paino: 1,025kg Toimituksen korkeus: 57mm Toimituksen leveys: 171mm Toimituksen pituus: 330mm UPC : 840815109594

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1

Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi

Tuotenro: 100018767
Magpul PRS Gen3 perä, harmaa
Valmistajan tuotenumero: MAG672-GRY 840815109617 Magpul PRS (Precision Rifle/Sniper) Gen3 säädettävä perä AR-15 kivääreihin. The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting. Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included) Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents Steel adjustment shafts finished with melonite for wear and corrosion resistance All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible) NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.

364.9 EUR 14 364,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Materiaali: Polymer Merkki: AR-15 Tyyppi: Adjustable Tyyppi: Rifle Length Väri: Gray

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Top takeaways

PRS GEN3 on säädettävä perä AR15/M16 ja AR10/SR25 alustoille, jossa on työkaluton vetopituuden ja poskipakan korkeuden säätö.
Se sisältää kumisen kantapään, joka on säädettävissä kallistuksen ja korkeuden suhteen, sekä M-LOK-kolot monopodin kiinnitystä varten.
PRS GEN3 on suunniteltu kestämään voimakkaita iskuja ja rekyyliä jopa .50 BMG asti, ja se on viimeistelty kulutusta ja korroosiota kestävillä materiaaleilla.

Ominaisuudet

Materiaali: Polymer Tyyli: Adjustable Tyyppi: Rifle Length Valmistaja: AR-15 Väri: Gray Toimituksen paino: 1,025kg Toimituksen korkeus: 57mm Toimituksen leveys: 171mm Toimituksen pituus: 330mm UPC : 840815109617

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1

Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi

Tuotenro: 100018768
Magpul PRS Gen3 perä, ODG (oliivin vihreä)
Valmistajan tuotenumero: MAG672-ODG 840815109624 Magpul PRS (Precision Rifle/Sniper) Gen3 säädettävä perä AR-15 kivääreihin. The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting. Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included) Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents Steel adjustment shafts finished with melonite for wear and corrosion resistance All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible) NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.

364.9 EUR 26 364,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Materiaali: Polymer Merkki: AR-15 Tyyppi: Adjustable Tyyppi: Rifle Length Väri: O.D. Green

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Top takeaways

PRS GEN3 on säädettävä perä AR15/M16 ja AR10/SR25 alustoille, jossa on työkaluttomat pituuden ja poskipakan korkeuden säädöt.
Se sisältää kumisen kantopään, joka on säädettävissä sekä kulman että korkeuden mukaan, ja siinä on M-LOK-aukot monopodin kiinnitystä varten.
Perä on suunniteltu kestämään voimakkaita iskuja ja rekyyliä, ja siinä on etu- ja takapään QD-sling kiinnityskupit sekä 1,25 tuuman alumiininen sling-lenkki.

Ominaisuudet

Materiaali: Polymer Tyyli: Adjustable Tyyppi: Rifle Length Valmistaja: AR-15 Väri: O.D. Green Toimituksen paino: 1,025kg Toimituksen korkeus: 57mm Toimituksen leveys: 171mm Toimituksen pituus: 330mm UPC : 840815109624

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1

Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi

Tuotenro: 100018766
Magpul PRS Gen3 perä, FDE (Flat Dark Earth)
Valmistajan tuotenumero: MAG672-FDE 840815109600 Magpul PRS (Precision Rifle/Sniper) Gen3 säädettävä perä AR-15 kivääreihin. The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting. Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included) Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents Steel adjustment shafts finished with melonite for wear and corrosion resistance All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible) NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.

344.9 EUR 0 344,90 € *

Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.

Ominaisuudet: Materiaali: Polymer Merkki: AR-15 Tyyppi: Adjustable Tyyppi: Rifle Length Väri: Flat Dark Earth

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Top takeaways

PRS GEN3 on säädettävä perä AR15/M16 ja AR10/SR25 alustoille, jossa on työkaluttomat pituuden ja poskipalan korkeuden säädöt.
Se sisältää säädettävän kumisen perälevyn, QD-slingikupit ja M-LOK-slotit monopodin kiinnitykseen.
Asennus suositellaan rifle-length receiver extension -putkeen optimaalisen istuvuuden ja toiminnan varmistamiseksi.

Ominaisuudet

Materiaali: Polymer Tyyli: Adjustable Tyyppi: Rifle Length Valmistaja: AR-15 Väri: Flat Dark Earth Toimituksen paino: 1,025kg Toimituksen korkeus: 57mm Toimituksen leveys: 171mm Toimituksen pituus: 330mm UPC : 840815109600

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1

Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti

Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi

Tutustu Magpul PRS Gen3 säädettävään perään AR-15 kivääreille. 🖤 Laadukas polymeri ja musta väri tekevät siitä täydellisen valinnan!

Lisää...

Asiakasarviot: Magpul PRS Gen3 perä, musta

Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 4,8

PRS upgrade (5.12.2017)

This is a excellent upgrade to my ruger precision rifle. I highly recommend it for that purpose.

Worth the wait! (14.8.2018)

Glad I bought it. (13.5.2017)

Good enough... (14.9.2017)

Picked this stock for my LR-308 6.5CM build, adjustment knob clicks are very positive feeling, She's a little on the heavy side but Magpul don't say its light.

Simply The Best (9.9.2018)

Lue 5 arvostelua lisää brownells.com sivustolla