The ALG AK Trigger is a single stage trigger for the AK47and AK74 variant platform. The AKT is machined from S7 tool steel. The AKT features a smoother and shorter trigger pull than the stock trigger, and is ideal for combat and home defense use. It has a Manganese Phosphated finish and is the same process used on stock AK triggers. The ALG AK Trigger feature a unique trigger bow known as the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger.
ALG DEFENSE säädettävä laukaisukoneisto AK-47 ja AK-74 kivääreihin. Helppo asentaa. Koneisto tarjoaa alkuperäistä lyhyemmän ja selkeämmän laukaisun. Ei säädettävissä.
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 11
Arvioiden keskiarvo: 4,2
Crisp break and light(1.7.2015)
Finally a real upgrade to your AK trigger. Light pull and a real crisp reliable break. Best AK trigger I have ever used. Watch the install video (28 min) and make sure that your safety functions properly. This is a must upgrade to any AK.
Very Bad Fitment On Multiple AKs(5.8.2015)
Did not fit my Arsenal AKs, I.O. AK, or Mini Draco 92 Pap. Trigger needs to filled down to allow bolt carrier to properly pass over trigger assembly and I was not going to hand file and refinish this trigger. Do ALOT of research online before buying this kit and attempting to install it in your AK. ALG was nil on support and all they could answer is that it fits "most" AKs. Not recommended. Get Tapco has about the same fit, finish and feel. Don't buy the hype of their "curved" trigger face. I own quite a few ALG products including their 6 second Glock mount and this is not on the same level of quality that ALG is know for.
Have two of these: one on a home-built Bulgarian AK 74 (1mm receiver) and one on a VEPR "Slant Back" in 7.62x39.with a 1-1/2 mm RPK-style receiver. Fitting was minimal - both rifles required installation of the roll pin and minor filing of that pin to get the correct clearance for the safety. That's it. No big deal.
I like this trigger so well that I'm in the process of buying my third one, so that all of the AK's in my collection are fitted with AKT's.
Great product, just not quite perfect(26.9.2015)
overall the trigger group went in to my wasr great and functions flawlessly. PITA to install. very short take up and re-set but still has an indistinct break like a tapco or other ak trigger. you don't really know when the gun will go off. 2lb trigger pull is awesome though. needs a SMALL notch milled in hammer to let the shooter know shot is about to break and itd be perfect. I am also getting some trigger slap I didn't get with tapco. o well, good enough for 1.5 groups at 100yds with WOLF. im happy.
so - so, spend the extra $30 on red star(7.10.2015)
Like other review stated itson par with tapco. I already have a red star arms/ grand masters adjustable trigger in my saiga 12 and another in my PSL. IDK if anything can beat those, Especially for the price. Polished the sear surfaces and breaks at three pounds even. Very smooth pull. I have the cheaper alg on my AR and I like it a lot. But this wasnt up to par. Btw the red star triggers require fitting as well. Don't expect to get around it from what I've seen.
good trigger(23.10.2015)
Good trigger at a fair price. Dropped right in my arsenal sagia, had to use the safety pin though and took more than a few passes of the file, I got out the grinder. Got it first try but they give you an extra pin if you mess up. Extra-fast reset, pull is a bit light for my tastes in a battle rifle. They say you can adjust pull weight by bending the main spring, but they included a small optional accessory spring retaining the trigger that supplements the pull by about a pound without any bending, which put it where I like it more (was getting doubles sometimes without it). Not a world of difference than the G2, but I like the shape and quicker reset. Would recommend a pin retaining plate to ease installation and get rid of that sheperds crook. Have fun!
Best ak trigger period.(25.10.2015)
This is by far the best AK trigger you can get. It is smoother, lighter and has a shorter travel than any of my polished reprofiled tapco g2's. Don't pay any attention to the one guy that says it does not fit His I.O AK and his mini m92. First off the fact that he owns an I.O tells you all you need to know. As far as an m92, they come with a full auto safety selector. Either use the pin in the trigger kit or modify the stock safety selector to make a semi auto selector or get a semi auto selector. The krebs selector is a semi auto and thats what I use on all of my aks. Nothing wrong with the trigger other than user error.
Great upgrade (23.11.2015)
Purchased this for my saiga 12. Trigger isn't a drop in on this platform and was a bit more work than I expected to allow it to work. With that said its a big improvement over the tapco g2 I had before. Nice short pull and reset. I'm not the biggest fan of the "bow" shape but getting more used to it. NOTE: don't purchase this for saigas unless your a gunsmith or know what your doing so it functions in a same manner.
I want to get off MR. BILL'S WILD RIDE(3.1.2016)
I purchased this trigger for my Arsenal SLR107-51, and for the first time in four AK pattern firearms encountered fitment issues immediately upon beginning the installation. In this case the disconnector stop rivet was rubbing on the body of the trigger, which is a possibility noted by the instructions, and while it is a little presumptuous of ALG to expect the user to modify a rifle to fit their trigger instead of the other way around, I did end up lightly filing the side of this rivet to permit the trigger - which I ultimately needed to file also - to rock freely per the instructions.
Once the trigger rocked freely, I installed the safety lever and noticed gross travel in the trigger when it was in the safe position - enter the fitment roll pin. I don't engineer triggers for a living, perhaps for good reason, but a pin that should sit at a fixed depth and only be able to enter or exit its channel from one end seems like an excellent use case for a taper pin. Instead, an oversized roll pin must be driven into a device with no apparent hope of being chocked firmly in a vise.
With the roll pin driven in and filed to fit, the trigger now rocked freely in the receiver and was held firm by the safety lever in the safe position as prescribed. Reassembling the fire control group (without the use of a slave pin or bore sleeve - not necessary but would have been a nice touch given Tapco can include one for $20 less), the final result was a good but certainly not remarkable trigger.
It is definitely a better trigger than the Tapco FCG - the travel is shorter, and the break is more definite, but the reset feels grimy, which could improve with time and cleaning but as of now is nothing special. While the inconvenience of this amount of fitment is forgivable given the variance in AK dimensions, the tolerances this trigger operate in - many of which are dependent on fitment by the end user - do not inspire confidence that this product will perform safely and remain as assembled as the device it is installed in (a black metal tube of explosions that sits in the sun for hours at a time) is used and experiences cycles of thermal expansion and contraction.
The bottom line: it is a better trigger than the Tapco, but not superior enough to justify the price premium, and definitely not superior enough to justify the excessive fitment. Feeling it side by side with the G2 in my SLR101s, there is no doubt I will save my time and money in the future and purchase Tapco triggers for any new AKs.
Best trigger for serious shooters Ak47(3.7.2016)
This is a fantastic trigger group. You may get a little trigger slap out of it if you're rapid firing but nothing to complain about. If you want to shorten your trigger pull and tighten your long range shots especially for 200+ yards this is the trigger for you. The staging of this trigger is great. If you want it to stage a little smoother give it a light polish in the proper spot but I just ran some rounds and it stages nicely. You can feel where the trigger is going to break witch is great but the pull and lash is so much shorter you can just tap it and hold your accuracy. I replaced a tapco G2 witch I hated as the trigger pull was incredibly long and completely unable to feel where the trigger would break. Long range shots at a quick rate with the G2 were sloppy if not impossible. I highly recommend this trigger. If you like trigger pull of an AR 15 or a glock trigger (although this is a little different) this trigger is for you. Love it can't say enough about it!!
Great trigger for the AK(26.11.2016)
Replaced stock with this trigger and the gun came to life!
Tuotenro: 100017370 AK-47, ilman varmistinta Valmistajan tuotenumero: 05-326854014005229ALG DEFENSE säädettävä laukaisukoneisto AK-47 ja AK-74 kivääreihin. Helppo asentaa. Koneisto tarjoaa alkuperäistä lyhyemmän ja selkeämmän laukaisun. Ei säädettävissä. ALG DEFENSE säädettävä laukaisukoneisto AK-47 ja AK-74 kivääreihin. Helppo asentaa. Koneisto tarjoaa alkuperäistä lyhyemmän ja selkeämmän laukaisun. Ei säädettävissä.
234.9EUR183234,90 €
*
Toimitusaika noin 2-4 viikkoa. Yli 10 kpl. USA:n varastossa
Made in USA
USA:n vientiluvan tyyppi: 0A501.c
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti
Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi
ALG DEFENSE AK-47 laukaisukoneisto tarjoaa lyhyemmän laukaisun. Helppo asentaa! 🔧 Sopii AK-47 ja AK-74 kivääreihin.
The ALG AK Trigger is a single stage trigger for the AK47and AK74 variant platform. The AKT is machined from S7 tool steel. The AKT features a smoother and shorter trigger pull than the stock trigger, and is ideal for combat and home defense use. It has a Manganese Phosphated finish and is the same process used on stock AK triggers. The ALG AK Trigger feature a unique trigger bow known as the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger.
ALG DEFENSE säädettävä laukaisukoneisto AK-47 ja AK-74 kivääreihin. Helppo asentaa. Koneisto tarjoaa alkuperäistä lyhyemmän ja selkeämmän laukaisun. Ei säädettävissä.
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 11
Arvioiden keskiarvo: 4,2
Crisp break and light(1.7.2015)
Finally a real upgrade to your AK trigger. Light pull and a real crisp reliable break. Best AK trigger I have ever used. Watch the install video (28 min) and make sure that your safety functions properly. This is a must upgrade to any AK.
Very Bad Fitment On Multiple AKs(5.8.2015)
Did not fit my Arsenal AKs, I.O. AK, or Mini Draco 92 Pap. Trigger needs to filled down to allow bolt carrier to properly pass over trigger assembly and I was not going to hand file and refinish this trigger. Do ALOT of research online before buying this kit and attempting to install it in your AK. ALG was nil on support and all they could answer is that it fits "most" AKs. Not recommended. Get Tapco has about the same fit, finish and feel. Don't buy the hype of their "curved" trigger face. I own quite a few ALG products including their 6 second Glock mount and this is not on the same level of quality that ALG is know for.
Have two of these: one on a home-built Bulgarian AK 74 (1mm receiver) and one on a VEPR "Slant Back" in 7.62x39.with a 1-1/2 mm RPK-style receiver. Fitting was minimal - both rifles required installation of the roll pin and minor filing of that pin to get the correct clearance for the safety. That's it. No big deal.
I like this trigger so well that I'm in the process of buying my third one, so that all of the AK's in my collection are fitted with AKT's.
Great product, just not quite perfect(26.9.2015)
overall the trigger group went in to my wasr great and functions flawlessly. PITA to install. very short take up and re-set but still has an indistinct break like a tapco or other ak trigger. you don't really know when the gun will go off. 2lb trigger pull is awesome though. needs a SMALL notch milled in hammer to let the shooter know shot is about to break and itd be perfect. I am also getting some trigger slap I didn't get with tapco. o well, good enough for 1.5 groups at 100yds with WOLF. im happy.
so - so, spend the extra $30 on red star(7.10.2015)
Like other review stated itson par with tapco. I already have a red star arms/ grand masters adjustable trigger in my saiga 12 and another in my PSL. IDK if anything can beat those, Especially for the price. Polished the sear surfaces and breaks at three pounds even. Very smooth pull. I have the cheaper alg on my AR and I like it a lot. But this wasnt up to par. Btw the red star triggers require fitting as well. Don't expect to get around it from what I've seen.
good trigger(23.10.2015)
Good trigger at a fair price. Dropped right in my arsenal sagia, had to use the safety pin though and took more than a few passes of the file, I got out the grinder. Got it first try but they give you an extra pin if you mess up. Extra-fast reset, pull is a bit light for my tastes in a battle rifle. They say you can adjust pull weight by bending the main spring, but they included a small optional accessory spring retaining the trigger that supplements the pull by about a pound without any bending, which put it where I like it more (was getting doubles sometimes without it). Not a world of difference than the G2, but I like the shape and quicker reset. Would recommend a pin retaining plate to ease installation and get rid of that sheperds crook. Have fun!
Best ak trigger period.(25.10.2015)
This is by far the best AK trigger you can get. It is smoother, lighter and has a shorter travel than any of my polished reprofiled tapco g2's. Don't pay any attention to the one guy that says it does not fit His I.O AK and his mini m92. First off the fact that he owns an I.O tells you all you need to know. As far as an m92, they come with a full auto safety selector. Either use the pin in the trigger kit or modify the stock safety selector to make a semi auto selector or get a semi auto selector. The krebs selector is a semi auto and thats what I use on all of my aks. Nothing wrong with the trigger other than user error.
Great upgrade (23.11.2015)
Purchased this for my saiga 12. Trigger isn't a drop in on this platform and was a bit more work than I expected to allow it to work. With that said its a big improvement over the tapco g2 I had before. Nice short pull and reset. I'm not the biggest fan of the "bow" shape but getting more used to it. NOTE: don't purchase this for saigas unless your a gunsmith or know what your doing so it functions in a same manner.
I want to get off MR. BILL'S WILD RIDE(3.1.2016)
I purchased this trigger for my Arsenal SLR107-51, and for the first time in four AK pattern firearms encountered fitment issues immediately upon beginning the installation. In this case the disconnector stop rivet was rubbing on the body of the trigger, which is a possibility noted by the instructions, and while it is a little presumptuous of ALG to expect the user to modify a rifle to fit their trigger instead of the other way around, I did end up lightly filing the side of this rivet to permit the trigger - which I ultimately needed to file also - to rock freely per the instructions.
Once the trigger rocked freely, I installed the safety lever and noticed gross travel in the trigger when it was in the safe position - enter the fitment roll pin. I don't engineer triggers for a living, perhaps for good reason, but a pin that should sit at a fixed depth and only be able to enter or exit its channel from one end seems like an excellent use case for a taper pin. Instead, an oversized roll pin must be driven into a device with no apparent hope of being chocked firmly in a vise.
With the roll pin driven in and filed to fit, the trigger now rocked freely in the receiver and was held firm by the safety lever in the safe position as prescribed. Reassembling the fire control group (without the use of a slave pin or bore sleeve - not necessary but would have been a nice touch given Tapco can include one for $20 less), the final result was a good but certainly not remarkable trigger.
It is definitely a better trigger than the Tapco FCG - the travel is shorter, and the break is more definite, but the reset feels grimy, which could improve with time and cleaning but as of now is nothing special. While the inconvenience of this amount of fitment is forgivable given the variance in AK dimensions, the tolerances this trigger operate in - many of which are dependent on fitment by the end user - do not inspire confidence that this product will perform safely and remain as assembled as the device it is installed in (a black metal tube of explosions that sits in the sun for hours at a time) is used and experiences cycles of thermal expansion and contraction.
The bottom line: it is a better trigger than the Tapco, but not superior enough to justify the price premium, and definitely not superior enough to justify the excessive fitment. Feeling it side by side with the G2 in my SLR101s, there is no doubt I will save my time and money in the future and purchase Tapco triggers for any new AKs.
Best trigger for serious shooters Ak47(3.7.2016)
This is a fantastic trigger group. You may get a little trigger slap out of it if you're rapid firing but nothing to complain about. If you want to shorten your trigger pull and tighten your long range shots especially for 200+ yards this is the trigger for you. The staging of this trigger is great. If you want it to stage a little smoother give it a light polish in the proper spot but I just ran some rounds and it stages nicely. You can feel where the trigger is going to break witch is great but the pull and lash is so much shorter you can just tap it and hold your accuracy. I replaced a tapco G2 witch I hated as the trigger pull was incredibly long and completely unable to feel where the trigger would break. Long range shots at a quick rate with the G2 were sloppy if not impossible. I highly recommend this trigger. If you like trigger pull of an AR 15 or a glock trigger (although this is a little different) this trigger is for you. Love it can't say enough about it!!
Great trigger for the AK(26.11.2016)
Replaced stock with this trigger and the gun came to life!
Apu ja yhteydenotto
(0) 
Uutiskirje
Perinteinen näkymä
Mobiilinäkymä