Case head separation from over-fired or out of spec brass won’t ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.
Kotelopään erottuminen yliladatuista tai speksistä poikkeavista messinkiputkista ei pilaa ampumakokemustasi, jos pidät tämän kätevän työkalun mukanasi taskussa tai kenttävarusteissa. Karkaistu terästyökalu poistaa luotettavasti ja helposti rikkoutuneet patruunat AR-tyyppisestä tai mistä tahansa muusta aseesta, joka on ladattu .223/5.56 NATO tai .308/7.62 NATO patruunoilla. Eksklusiivinen, kierretty, kaksiosainen muotoilu on säädettävissä kokonaispituuden mukaan, joten työkalu tarttuu täysin patruunan suun reunaan; se ei voi liukua läpi tai irrota. Erittäin helppo käyttää: pudota rikkoutunut kuorien poistaja suoraan rikkoutuneen patruunan sisälle. Anna lukon sulkeutua, jotta poistaja tarttuu työkalun reunaan, ja vedä lukko takaisin avatakseksi patruunapesä. Rikkoutunut patruuna poistuu yhdessä rikkoutuneen kuorien poistajan kanssa.