Silicon Carbide Abrasive Balls For Flawless "Inside" Polishing On Revolvers & Semi-Auto Pistols
Mainspring housing hone expertly polishes the inside of a Government or Commander mainspring housing leaving a smooth burr free surface.. The smooth surface finish is essential for that professional trigger job. Hones are available in a medium 400 grit or a fine 800 grit.
SPECS: Med. and Fine grit silicon carbide abrasive, twisted steel shafts. Must be used with Flex-Hone oil. 1911 Slide Lug Area Hone: 8" (20.3cm) long
Mainspring housing hone -ammattilaisväline kiillottaa Government- tai Commander-mallin mainspring housingin sisäpinnan jättäen sileän, karheatonta pintaa. Sileä pinta on olennainen osa ammattimaista liipaisintyötä. Honeja on saatavilla keskikarkeudella 400 grit tai hienolla 800 grit.
SPECS: Keskikarkea ja hieno karbidisilikonihiekkapaperi, kierretty teräsvaarna. On käytettävä Flex-Hone öljyn kanssa. 1911 Slide Lug Area Hone: 8" (20.3cm) pitkä
Lisää...
Asiakasarviot: BROWNELLS FINE 1911 MAINSPRING HOUSING HONE
Arvioiden lukumäärä: 1
Arvostelut brownells.com sivustolla: 1
Arvioiden keskiarvo: 5
Feels like an expensive action job(18.9.2015)
I used both the medium and fine versions with the prescribed FlexHone oil. Chucked in a padded vise at a convenient working angle under a light, I used a quick,rythmic in and out motion to achieve a somewhat crosshatch pattern that becomes shiny with the fine stones.
The purpose of the motion is to avoid "grooving" the spring bore and I would allow the hone to "dwell" at the bottom of the strokes every few seconds to avoid tapering of the bore.
Using a long tailed mainspring cap with a tapered end (like factory Colt parts) will act as a better guide rod and contribute to a smooth feeling cocking stroke that makes your pistol feel like a finely tuned custom!
Tuotenro: 080608211 BROWNELLS FINE 1911 MAINSPRING HOUSING HONE Valmistajan tuotenumero: 00910050806019140 Mainspring housing hone -ammattilaisväline kiillottaa Government- tai Commander-mallin mainspring housingin sisäpinnan jättäen sileän, karheatonta pintaa. Sileä pinta on olennainen osa ammattimaista liipaisintyötä. Honeja on saatavilla keskikarkeudella 400 grit tai hienolla 800 grit.
49.9EUR049,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Tuotenro: 080608111 BROWNELLS MEDIUM 1911 MAINSPRING HOUSING HONE Valmistajan tuotenumero: 00909050806019089 Mainspring housing hone -ammattilaisväline kiillottaa Government- tai Commander-mallin mainspring housingin sisäpinnan jättäen sileän, karheatonta pintaa. Sileä pinta on olennainen osa ammattimaista liipaisintyötä. Honeja on saatavilla keskikarkeudella 400 grit tai hienolla 800 grit.
44.9EUR144,90 €
*
Toimitusaika noin 2-4 viikkoa. 1 kpl. USA:n varastossa
Silicon Carbide Abrasive Balls For Flawless "Inside" Polishing On Revolvers & Semi-Auto Pistols
Mainspring housing hone expertly polishes the inside of a Government or Commander mainspring housing leaving a smooth burr free surface.. The smooth surface finish is essential for that professional trigger job. Hones are available in a medium 400 grit or a fine 800 grit.
SPECS: Med. and Fine grit silicon carbide abrasive, twisted steel shafts. Must be used with Flex-Hone oil. 1911 Slide Lug Area Hone: 8" (20.3cm) long
Mainspring housing hone -ammattilaisväline kiillottaa Government- tai Commander-mallin mainspring housingin sisäpinnan jättäen sileän, karheatonta pintaa. Sileä pinta on olennainen osa ammattimaista liipaisintyötä. Honeja on saatavilla keskikarkeudella 400 grit tai hienolla 800 grit.
SPECS: Keskikarkea ja hieno karbidisilikonihiekkapaperi, kierretty teräsvaarna. On käytettävä Flex-Hone öljyn kanssa. 1911 Slide Lug Area Hone: 8" (20.3cm) pitkä
Lisää...
Asiakasarviot: BROWNELLS FINE 1911 MAINSPRING HOUSING HONE
Arvioiden lukumäärä: 1
Arvostelut brownells.com sivustolla: 1
Arvioiden keskiarvo: 5
Feels like an expensive action job(18.9.2015)
I used both the medium and fine versions with the prescribed FlexHone oil. Chucked in a padded vise at a convenient working angle under a light, I used a quick,rythmic in and out motion to achieve a somewhat crosshatch pattern that becomes shiny with the fine stones.
The purpose of the motion is to avoid "grooving" the spring bore and I would allow the hone to "dwell" at the bottom of the strokes every few seconds to avoid tapering of the bore.
Using a long tailed mainspring cap with a tapered end (like factory Colt parts) will act as a better guide rod and contribute to a smooth feeling cocking stroke that makes your pistol feel like a finely tuned custom!