Extra-thin to reduce bulk for concealed carry and give shooters with small hands a better hold. Available with Double Diamond checkered to fit 1911 Auto and Officers ACP. All require slim bushings and screws, available separately. Mahogany is deep reddish/brown color of varying intensity.
SPECS: Approximately .165" (4.2mm) thick. Mahogany is genuine Philippine mahogany.
Lisää...
Vähentää tilavuutta, helppo tarttua
Erittäin ohuet kahvat vähentävät kokoa piilokantamista varten ja tarjoavat pienikätisille ampujille paremman otteen. Saatavilla Double Diamond -kuviolla varustettuna, sopii 1911 Auto ja Officers ACP -malleihin. Kaikki vaativat ohuet holkkit ja ruuvit, saatavilla erikseen. Mahonki on syvän punaruskea väri, jonka intensiteetti vaihtelee.
SPECS: Paksuus noin .165" (4,2mm). Mahonki on aitoa filippiiniläistä mahonkia.
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 3,9
Nice for the price(18.12.2022)
With the exception of slight dimensional inaccuracies (grip studs are a tight fit), the grips are nice, period. Mahogany is of reasonably good quality, finished nicely and they really made a difference in my two Caspian-pattern double stack 1911:s. The same grips in quality walnut or cocobolo would be high on my wish list, but you can't have everything can you? Still: recommended.
Great Product!(12.8.2009)
Easliy installed with the bushings and screws I ordered at the same time. The 1911 isn't bulky, but these are amazing in the way that they improve the feel of the pistol. I know the trendy thing these days is for aluminum or composites, and these are supposed to improve your purchase of the weapon. I cannot stand the feel of those things. These are traditional, nicely grained, checkered wood, the checkering is sharp, crisp, and easy on the hand. They aren't ostentatious, they don't have fancy designs, etc. If you want "pretty" grips like that, look somewhere else. If you want something that WORKS, and works WELL, then you want this.
Worked well, inexpensive(26.4.2010)
Perfect fit on my 1911. I added a Pearce grip enhancement underneath and the fit is dead on with my short fingers. Very positive control. You need the slim bushings for the panels and standard length screws with the addition of the Pearce grip. My grip screws are allen heads and I sanded the heads down just a tad for a more flush fit. The sanding was not needed,just my personel preferance. No thread protrusion into the mag well at all.
Not too bad(17.8.2010)
I wanted to try a set of slim grips but didn't want to break the bank on something I was unsure of. That being said, these are inexpensive and not too bad. This was not quite a drop in replacement. The set of grips I received seemed like they were unfinished and very light in color. The checkering wasn't as deep as the set they are replacing either. The cut out for the mag release was a tad bit too high. And they were also too tall on the plunger side pushing up against the plunger and not lining up. This all wasn't too big a deal for me. A little sanding and some finish and these turned out looking good. They also feel good too. Don't forget the slim bushing and grip screws.
Needed some work(19.8.2010)
The grips I received looked like the were unfinished. They were very light in color and the edges were "furry" and needed to be sanded. The left grip was too tall and was pushing against the plunger tube and did not line up with the bushings. The right side had the mag release notch cut too high. That being said, I sanded them to fit and cleaned them up, and finished them with tung oil. They now look and feel good. All in all, they are worth the price. Don't forget the slim bushing and screws.
Good Value(14.3.2011)
These grips were very well matched and the fit was good, too. The slim contour really helps, especially with my short fingers. While they appeared to be "unfinished," the quality and grain of the wood looked great. After just a little "de-whiskering" and a traditional and easy linseed finish, they looked three times their price! These were well worth their modest cost.
Okay but not stellar.(28.7.2011)
I don't really have much more to add to what has already been said. The wood is Philippine Mahogany, which I discovered AFTER-the-fact isn't really mahogany at all, but some kind of cheap jungle plant (lauan). Actually I shouldn't say "cheap"; apparently it has some good qualities, but it is NOT mahogany by any stretch of the imagination. Its main use is to make plywood.
The wood came unfinished. I rubbed in several layers of boiled linseed oil, which was an improvement.
The color of the wood is really light. Again, the linseed oil helped darken it a little, but it's still much lighter than I would have preferred. I'm hoping the wood will darken with age/use, and I plan to continue applying linseed oil during regular cleanings. I may end up just staining them if I don't see an improvement.
As someone else mentioned, the checkering is rather shallow. In spite of that, I think it functions okay.
On the plus side, the grips dropped right in without any additional fitting required (don't forget to order slim grip screws & bushings, too). I didn't need to sand mine to remove "fuzz", either.
I used a calipers to measure the difference in width between these slim grips and the originals; unfortunately, I didn't write down the measurements (my bad). IIRC, there was about a 0.15" difference in width; call it an eighth (but take that with a grain of salt since I'm quoting from memory).
My number 1 reason for buying these grips was price. I'm not disappointed in that regard, but let's face it... the time out of my schedule to finish the wood, the lower quality wood, etc is a trade-off, so the true "value" of the grips is in question (IMO). Nevertheless, if you're like me and don't feel like spending an arm and a leg to "try" a set of slim grips, then these will certainly fill the bill.
These grips aren't going to "wow" you out-of-the-box, but they've met my needs.
double diamond slims(3.2.2013)
reading the other reviews i knew to expect an "unfinished" product. i figured id have to stain them to get the red color i wanted. but out of the package they were red enough for me and just need some kind of oil or "sealing" of the wood to preserve them. i did 2 coats of toms 1/3 gun wax on them and they look great! fit nice too. with the hardware it was under 40.00 very much thinner than my stock rock island grips. much better grip on the gun now.
Poor quality grips, not worth the money(5.12.2013)
Like most of the reviewers here, I purchased these grips due to the low price. However, I should have read the reviews more in depth instead of trusting the aggregate star rating from Brownells. The grips that I received were definitely in unfinished condition.
While I had originally considered returning the grips to Brownells, I figured I'd try to put some work into them to see if they could be salvaged. There was quite a bit of "fuzz" still left on the grips from the checkering process that I had to remove using sandpaper. As the "mahogany" was quite light in color, I decided to stain the grips with Minwax Red Mahogany Stain. However, as Bullwinkle stated in his review, these grips are not real Mahogany but Philippine lauan wood. As you can see from the attached picture, the grips do not stain well at all. The grain profile of the wood results in a very uneven stain pattern.
While the low price is attractive, I feel that you're better off purchasing an alternative product that is in finished form. I'm disappointed that Brownells would carry such a low quality product as everything else I have purchased here has been top of the line.
NICE STRONG GRIPS(24.3.2012)
Perfect fit and strong!!!! Slim and feel great!!
Outstanding stocks(5.12.2011)
I have Navidrex slimline stocks on all of my serious use 1911s. Love them.
The fit and finish on them is excellent, and they are impervious to just about everything.
Tuotenro: 647000018 NAVIDREX MAHOGANY GOVT. DOUBLE DIAMOND SLIM GRIPS Valmistajan tuotenumero: NONE Erittäin ohuet kahvat vähentävät kokoa piilokantamista varten ja tarjoavat pienikätisille ampujille paremman otteen. Saatavilla Double Diamond -kuviolla varustettuna, sopii 1911 Auto ja Officers ACP -malleihin. Kaikki vaativat ohuet holkkit ja ruuvit, saatavilla erikseen. Mahonki on syvän punaruskea väri, jonka intensiteetti vaihtelee.
47.9EUR047,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Erittäin ohuet kahvat parantavat piilokantamista ja sopivat pienikätisille ampujille.
Double Diamond -kuvio, sopii 1911 Auto ja Officers ACP -malleihin, vaatii ohuet holkkit ja ruuvit (saatavilla erikseen).
Valmistettu aidosta filippiiniläisestä mahongista, paksuus noin 4,2 mm.
Ominaisuudet
Ambidextrous Safety Cut:
No
Malli:
Commander,Government
Materiaali:
Wood
Pinta:
Checkered
Tyyli:
Traditional
Valmistaja:
1911
Väri:
Brown
Toimituksen paino: 0,005kgToimituksen korkeus: 5mmToimituksen leveys: 86mmToimituksen pituus: 135mm
Tuotekuvaus
USA:n vientiluvan tyyppi: 0A501.y.1
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Vastuullinen taloudellinen toimija EU-asetuksen mukaisesti
Brownells Finland Oy
Kutojantie 3
02630 Espoo
Suomi
tiedustelut@brownells.fi
Tutustu 1911 SLIM GRIPS NAVIDREX mahonkisiin kahvoihin, jotka tarjoavat paremman otteen 🎯 ja ohuemman muodon piilokantamiseen.
Extra-thin to reduce bulk for concealed carry and give shooters with small hands a better hold. Available with Double Diamond checkered to fit 1911 Auto and Officers ACP. All require slim bushings and screws, available separately. Mahogany is deep reddish/brown color of varying intensity.
SPECS: Approximately .165" (4.2mm) thick. Mahogany is genuine Philippine mahogany.
Lisää...
Vähentää tilavuutta, helppo tarttua
Erittäin ohuet kahvat vähentävät kokoa piilokantamista varten ja tarjoavat pienikätisille ampujille paremman otteen. Saatavilla Double Diamond -kuviolla varustettuna, sopii 1911 Auto ja Officers ACP -malleihin. Kaikki vaativat ohuet holkkit ja ruuvit, saatavilla erikseen. Mahonki on syvän punaruskea väri, jonka intensiteetti vaihtelee.
SPECS: Paksuus noin .165" (4,2mm). Mahonki on aitoa filippiiniläistä mahonkia.
Arvioiden lukumäärä: 11
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 3,9
Nice for the price(18.12.2022)
With the exception of slight dimensional inaccuracies (grip studs are a tight fit), the grips are nice, period. Mahogany is of reasonably good quality, finished nicely and they really made a difference in my two Caspian-pattern double stack 1911:s. The same grips in quality walnut or cocobolo would be high on my wish list, but you can't have everything can you? Still: recommended.
Great Product!(12.8.2009)
Easliy installed with the bushings and screws I ordered at the same time. The 1911 isn't bulky, but these are amazing in the way that they improve the feel of the pistol. I know the trendy thing these days is for aluminum or composites, and these are supposed to improve your purchase of the weapon. I cannot stand the feel of those things. These are traditional, nicely grained, checkered wood, the checkering is sharp, crisp, and easy on the hand. They aren't ostentatious, they don't have fancy designs, etc. If you want "pretty" grips like that, look somewhere else. If you want something that WORKS, and works WELL, then you want this.
Worked well, inexpensive(26.4.2010)
Perfect fit on my 1911. I added a Pearce grip enhancement underneath and the fit is dead on with my short fingers. Very positive control. You need the slim bushings for the panels and standard length screws with the addition of the Pearce grip. My grip screws are allen heads and I sanded the heads down just a tad for a more flush fit. The sanding was not needed,just my personel preferance. No thread protrusion into the mag well at all.
Not too bad(17.8.2010)
I wanted to try a set of slim grips but didn't want to break the bank on something I was unsure of. That being said, these are inexpensive and not too bad. This was not quite a drop in replacement. The set of grips I received seemed like they were unfinished and very light in color. The checkering wasn't as deep as the set they are replacing either. The cut out for the mag release was a tad bit too high. And they were also too tall on the plunger side pushing up against the plunger and not lining up. This all wasn't too big a deal for me. A little sanding and some finish and these turned out looking good. They also feel good too. Don't forget the slim bushing and grip screws.
Needed some work(19.8.2010)
The grips I received looked like the were unfinished. They were very light in color and the edges were "furry" and needed to be sanded. The left grip was too tall and was pushing against the plunger tube and did not line up with the bushings. The right side had the mag release notch cut too high. That being said, I sanded them to fit and cleaned them up, and finished them with tung oil. They now look and feel good. All in all, they are worth the price. Don't forget the slim bushing and screws.
Good Value(14.3.2011)
These grips were very well matched and the fit was good, too. The slim contour really helps, especially with my short fingers. While they appeared to be "unfinished," the quality and grain of the wood looked great. After just a little "de-whiskering" and a traditional and easy linseed finish, they looked three times their price! These were well worth their modest cost.
Okay but not stellar.(28.7.2011)
I don't really have much more to add to what has already been said. The wood is Philippine Mahogany, which I discovered AFTER-the-fact isn't really mahogany at all, but some kind of cheap jungle plant (lauan). Actually I shouldn't say "cheap"; apparently it has some good qualities, but it is NOT mahogany by any stretch of the imagination. Its main use is to make plywood.
The wood came unfinished. I rubbed in several layers of boiled linseed oil, which was an improvement.
The color of the wood is really light. Again, the linseed oil helped darken it a little, but it's still much lighter than I would have preferred. I'm hoping the wood will darken with age/use, and I plan to continue applying linseed oil during regular cleanings. I may end up just staining them if I don't see an improvement.
As someone else mentioned, the checkering is rather shallow. In spite of that, I think it functions okay.
On the plus side, the grips dropped right in without any additional fitting required (don't forget to order slim grip screws & bushings, too). I didn't need to sand mine to remove "fuzz", either.
I used a calipers to measure the difference in width between these slim grips and the originals; unfortunately, I didn't write down the measurements (my bad). IIRC, there was about a 0.15" difference in width; call it an eighth (but take that with a grain of salt since I'm quoting from memory).
My number 1 reason for buying these grips was price. I'm not disappointed in that regard, but let's face it... the time out of my schedule to finish the wood, the lower quality wood, etc is a trade-off, so the true "value" of the grips is in question (IMO). Nevertheless, if you're like me and don't feel like spending an arm and a leg to "try" a set of slim grips, then these will certainly fill the bill.
These grips aren't going to "wow" you out-of-the-box, but they've met my needs.
double diamond slims(3.2.2013)
reading the other reviews i knew to expect an "unfinished" product. i figured id have to stain them to get the red color i wanted. but out of the package they were red enough for me and just need some kind of oil or "sealing" of the wood to preserve them. i did 2 coats of toms 1/3 gun wax on them and they look great! fit nice too. with the hardware it was under 40.00 very much thinner than my stock rock island grips. much better grip on the gun now.
Poor quality grips, not worth the money(5.12.2013)
Like most of the reviewers here, I purchased these grips due to the low price. However, I should have read the reviews more in depth instead of trusting the aggregate star rating from Brownells. The grips that I received were definitely in unfinished condition.
While I had originally considered returning the grips to Brownells, I figured I'd try to put some work into them to see if they could be salvaged. There was quite a bit of "fuzz" still left on the grips from the checkering process that I had to remove using sandpaper. As the "mahogany" was quite light in color, I decided to stain the grips with Minwax Red Mahogany Stain. However, as Bullwinkle stated in his review, these grips are not real Mahogany but Philippine lauan wood. As you can see from the attached picture, the grips do not stain well at all. The grain profile of the wood results in a very uneven stain pattern.
While the low price is attractive, I feel that you're better off purchasing an alternative product that is in finished form. I'm disappointed that Brownells would carry such a low quality product as everything else I have purchased here has been top of the line.
NICE STRONG GRIPS(24.3.2012)
Perfect fit and strong!!!! Slim and feel great!!
Outstanding stocks(5.12.2011)
I have Navidrex slimline stocks on all of my serious use 1911s. Love them.
The fit and finish on them is excellent, and they are impervious to just about everything.
Apu ja yhteydenotto
(0) 
Uutiskirje
Perinteinen näkymä
Mobiilinäkymä