No-fail extractor operates with long-lasting coil springs for increased service life; provides enhanced, reliable performance for self-defense and competitor shooters. Machined from super strong, alloy steel; specially hardened and heat treated to last indefinitly. Installs easily in Series 70 1911 Autos without slide modifications.
SPECS: Steel, in-the-white, heat treated. Includes two sets of springs, complete instructions. NOTE on 9mm: If your slide has a true, 9mm breech face (like the SVI interchangable, some Caspians and Nowlins, order extractor #466-001-038. If your 9mm is built on a .38 Super Slide (most are) order extractor #466-001-009.
Ei-vikaantuva irrotin, jossa on pitkäkestoiset kierrejouset, takaa tuotteen pitkän elinkaaren; tarjoaa huippuluokan ja luotettavan suorituskyvyn sekä itsepuolustukseen että kilpailuampujille. Valmistettu erittäin lujasta seosteräksestä ja se on erikoiskarkaistu sekä lämpökäsitelty kestävyyden varmistamiseksi. Helppo asentaa Series 70 1911 -pistoolimalleihin ilman liukukappaleen muokkausta.
OMINAISUUDET: Teräs, pintakäsittelemätön, lämpökäsitelty. Pakkaus sisältää kaksi sarjaa jousia ja kattavat asennusohjeet. HUOMAUTUS 9mm aseille: Jos aseen liukusi on aito 9mm patruunapesä (kuten SVI:n vaihdettavat, tietyt Caspian ja Nowlin mallit), tilaa irrotin #466-001-038. Jos 9mm pistoolisi on rakennettu .38 Super liukukappaleen pohjalta (kuten useimmat), tilaa irrotin #466-001-009.
Lisää...
Asiakasarviot: MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.
Arvioiden lukumäärä: 7
Arvostelut brownells.com sivustolla: 7
Arvioiden keskiarvo: 4,4
Final Answer in Extractors!(24.8.2009)
This will end your extractor problems in your 1911. I had a Kimber and I could not get the extractor tuned correctly. I spent the extra and got the Millenium over the traditional designs. It installed easily with only minor fitting. Make sure it floats very freely on the firing pin stop. It cured all extractions problems.
Best Extractor Period(15.6.2012)
There isn't a thing to complain about this extractor other than losing the springs when you clean your gun. A little fitting at the firing pin stop and a little shaping (if at all) is all you need to get this extractor running great. The extra cost is actually cheaper in the long run when just having to change the springs and cap compared to changing the entire extractor, fitting, and tuning. I have put well over 5000 rounds on this extractor with no problems at all, and change out the springs and cap just for a yearly tune up. Springs come out still with good spring pressure and the cap isn't beat up at all
Very Disappointed(27.5.2013)
I read good things about this extractor and gave it a try. Unfortunately, I cannot get it to function properly. The instructions talk about fitting a firing pin stop to allow the extractor's slot to pivot around the firing pin stop. After much filing, I've been unable to fit the firing pin stop enough to allow the extractor to exert enough tension on a casing.
Perhaps this company needs to provide its own firing pin stop in the kit.
It'll sit in my spare parts box until I give it away along with a scrapped $20 firing pin stop.
Absolutely the best(14.11.2013)
This is the most reliable extractor that ever was. I wish I had invented it since I am now about to buy my 5th one in about 15 years! No they didn't wear out I'm just putting one on my newest competetion toy. I have NEVER had a failed extraction in 15,000 to 20,000 rounds. I have tried ALL of the others. Watch out for all of the catch phrases like " tough, bullet proof, hard core etc. they talk the talk". Take the time to fit it to the firing pin stop since there are many different sizes. Thickness etc.
Worth Every Penny.(15.3.2014)
My STI Ranger II had failure to extract causing a double feed 5/10 times with reloaded ammunition and about once or twice per mag with factory ammunition. I ordered one of these guys and dropped it in. It fix all of my FTE. I have since ran about 500 rounds through her and i have ZERO issues. For 9mm it's a bit tougher to install an extractor. This product DOES REQUIRE FITTING. you might have to make modifications to your firing pin stop. Mine also sticks out a bit at the back that i will have to file or stone to make it fit flush. I can live with it sticking out a bit so long as my gun guns 100%. This product also requires a breaking in period. It comes with 2 springs and of which i only installed one until the spring softened a little. It is a lot beefier then the stock extractor.
gun fixed(28.6.2015)
Wife favorite gun love to shoot it, 1911 38 super, has has extraction problems right out of the box. Many tunings, no progress Then I bought a high dollar extractor and had the areas "best gunsmith" install and tune it. 70 rounds OK and then problems again with jams and stovepipes again.
Bought one of these extractors installed it myself and she just put "problem free" round number 500 through it today. Problem solved and we are both very pleased with the product.
Worked on a 22 TCM(8.9.2015)
So the Rock Island 22 TCM can be a problematic cartridge. I was starting to have a myriad of FTE's. I read about this and as a last resort thought I'd try it. The 22 TCM is not based on the 9mm but on the 5.56 case head size. So it's a bit smaller. The extractor didn't hold the TCM case as tightly as a 9mm. It didn't matter. It still worked and worked well. For the first time I ran a box of ammo though the pistol with no malfunctions.
It's a bit fiddley to install, more so that a regular extractor but after playing with it a bit I managed to it in...I'm very happy with it. $89.00 is stiff but it does work.
Tuotenro: 466001009 MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP. Valmistajan tuotenumero: ACE-01 Ei-vikaantuva irrotin, jossa on pitkäkestoiset kierrejouset, takaa tuotteen pitkän elinkaaren; tarjoaa huippuluokan ja luotettavan suorituskyvyn sekä itsepuolustukseen että kilpailuampujille. Valmistettu erittäin lujasta seosteräksestä ja se on erikoiskarkaistu sekä lämpökäsitelty kestävyyden varmistamiseksi. Helppo asentaa Series 70 1911 -pistoolimalleihin ilman liukukappaleen muokkausta.
Ei-vikaantuva irrotin, jossa on pitkäkestoiset kierrejouset, takaa tuotteen pitkän elinkaaren ja luotettavan suorituskyvyn.
Helppo asentaa Series 70 1911 -pistoolimalleihin ilman liukukappaleen muokkausta.
Valmistettu erittäin lujasta seosteräksestä, erikoiskarkaistu ja lämpökäsitelty kestävyyden varmistamiseksi.
Ominaisuudet
Kaliiperi:
38 Super (.355-.356)
Malli:
Commander,Government,Officers
Valmistaja:
1911
Viimeistely:
Black
Toimituksen paino: 0,018kgToimituksen korkeus: 8mmToimituksen leveys: 102mmToimituksen pituus: 128mm
Tuotekuvaus
Made in USA
USA:n vientiluvan tyyppi: 0A501.x
USA:n hallitus kontrolloi näitä tuotteita. Niiden vienti USA:sta on sallittu vain siihen maahan, johon ne on tilattu, ja vain vastaanottajan tai loppukäyttäjän käyttöön. Niitä ei saa uudelleenmyydä, siirtää tai luovuttaa mihinkään muuhun maahan tai muulle henkilölle kuin vastaanottajalle tai loppukäyttäjälle, ei alkuperäisessä muodossaan eikä muiden tuotteiden osana, ilman etukäteen hankittua lupaa USA:n hallitukselta tai muuta USA:n lakiin ja määräyksiin perustuvaa hyväksyntää.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Tutustu 1911 ADVANCED COMPETITION EXTRACTOR: pitkäkestoista suorituskykyä ja helppo asennus! 🔧 Täydellinen kilpailuampujille ja itsepuolustukseen.
No-fail extractor operates with long-lasting coil springs for increased service life; provides enhanced, reliable performance for self-defense and competitor shooters. Machined from super strong, alloy steel; specially hardened and heat treated to last indefinitly. Installs easily in Series 70 1911 Autos without slide modifications.
SPECS: Steel, in-the-white, heat treated. Includes two sets of springs, complete instructions. NOTE on 9mm: If your slide has a true, 9mm breech face (like the SVI interchangable, some Caspians and Nowlins, order extractor #466-001-038. If your 9mm is built on a .38 Super Slide (most are) order extractor #466-001-009.
Ei-vikaantuva irrotin, jossa on pitkäkestoiset kierrejouset, takaa tuotteen pitkän elinkaaren; tarjoaa huippuluokan ja luotettavan suorituskyvyn sekä itsepuolustukseen että kilpailuampujille. Valmistettu erittäin lujasta seosteräksestä ja se on erikoiskarkaistu sekä lämpökäsitelty kestävyyden varmistamiseksi. Helppo asentaa Series 70 1911 -pistoolimalleihin ilman liukukappaleen muokkausta.
OMINAISUUDET: Teräs, pintakäsittelemätön, lämpökäsitelty. Pakkaus sisältää kaksi sarjaa jousia ja kattavat asennusohjeet. HUOMAUTUS 9mm aseille: Jos aseen liukusi on aito 9mm patruunapesä (kuten SVI:n vaihdettavat, tietyt Caspian ja Nowlin mallit), tilaa irrotin #466-001-038. Jos 9mm pistoolisi on rakennettu .38 Super liukukappaleen pohjalta (kuten useimmat), tilaa irrotin #466-001-009.
Lisää...
Asiakasarviot: MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.
Arvioiden lukumäärä: 7
Arvostelut brownells.com sivustolla: 7
Arvioiden keskiarvo: 4,4
Final Answer in Extractors!(24.8.2009)
This will end your extractor problems in your 1911. I had a Kimber and I could not get the extractor tuned correctly. I spent the extra and got the Millenium over the traditional designs. It installed easily with only minor fitting. Make sure it floats very freely on the firing pin stop. It cured all extractions problems.
Best Extractor Period(15.6.2012)
There isn't a thing to complain about this extractor other than losing the springs when you clean your gun. A little fitting at the firing pin stop and a little shaping (if at all) is all you need to get this extractor running great. The extra cost is actually cheaper in the long run when just having to change the springs and cap compared to changing the entire extractor, fitting, and tuning. I have put well over 5000 rounds on this extractor with no problems at all, and change out the springs and cap just for a yearly tune up. Springs come out still with good spring pressure and the cap isn't beat up at all
Very Disappointed(27.5.2013)
I read good things about this extractor and gave it a try. Unfortunately, I cannot get it to function properly. The instructions talk about fitting a firing pin stop to allow the extractor's slot to pivot around the firing pin stop. After much filing, I've been unable to fit the firing pin stop enough to allow the extractor to exert enough tension on a casing.
Perhaps this company needs to provide its own firing pin stop in the kit.
It'll sit in my spare parts box until I give it away along with a scrapped $20 firing pin stop.
Absolutely the best(14.11.2013)
This is the most reliable extractor that ever was. I wish I had invented it since I am now about to buy my 5th one in about 15 years! No they didn't wear out I'm just putting one on my newest competetion toy. I have NEVER had a failed extraction in 15,000 to 20,000 rounds. I have tried ALL of the others. Watch out for all of the catch phrases like " tough, bullet proof, hard core etc. they talk the talk". Take the time to fit it to the firing pin stop since there are many different sizes. Thickness etc.
Worth Every Penny.(15.3.2014)
My STI Ranger II had failure to extract causing a double feed 5/10 times with reloaded ammunition and about once or twice per mag with factory ammunition. I ordered one of these guys and dropped it in. It fix all of my FTE. I have since ran about 500 rounds through her and i have ZERO issues. For 9mm it's a bit tougher to install an extractor. This product DOES REQUIRE FITTING. you might have to make modifications to your firing pin stop. Mine also sticks out a bit at the back that i will have to file or stone to make it fit flush. I can live with it sticking out a bit so long as my gun guns 100%. This product also requires a breaking in period. It comes with 2 springs and of which i only installed one until the spring softened a little. It is a lot beefier then the stock extractor.
gun fixed(28.6.2015)
Wife favorite gun love to shoot it, 1911 38 super, has has extraction problems right out of the box. Many tunings, no progress Then I bought a high dollar extractor and had the areas "best gunsmith" install and tune it. 70 rounds OK and then problems again with jams and stovepipes again.
Bought one of these extractors installed it myself and she just put "problem free" round number 500 through it today. Problem solved and we are both very pleased with the product.
Worked on a 22 TCM(8.9.2015)
So the Rock Island 22 TCM can be a problematic cartridge. I was starting to have a myriad of FTE's. I read about this and as a last resort thought I'd try it. The 22 TCM is not based on the 9mm but on the 5.56 case head size. So it's a bit smaller. The extractor didn't hold the TCM case as tightly as a 9mm. It didn't matter. It still worked and worked well. For the first time I ran a box of ammo though the pistol with no malfunctions.
It's a bit fiddley to install, more so that a regular extractor but after playing with it a bit I managed to it in...I'm very happy with it. $89.00 is stiff but it does work.
Apu ja yhteydenotto
(0) 
Uutiskirje
Perinteinen näkymä
Mobiilinäkymä