Korisi on tyhjä.

Ostoskori

Apu ja yhteydenotto

Ilmainen toimitus yli 250€ perustoimituksille

100:n päivän palautusoikeus

Uutiskirje

Tarjoukset

Yli 300 000 asiakasta - kiitämme teitä!

4,93/5 "Erittäin hyvä" (1400+ arvostelua)

Yli 40 000 tuotetta metsästykseen ja ammuntaan

WEIGAND COMBAT
1911 EXTRACTOR TENSIONING TOOL

957000037

Improves Case Feeding, Extraction & Ejection

Easily puts just the right bend in the extractor, without over-bending, for precise tension adjustment, right to the ounce. Use in conjunction with the Weigand Extractor Tension Gauges to fine tune the extractor for optimum extraction and feeding reliability. Carry in your range bag to keep the extractor performing its best.

SPECS: Aluminum, natural finish. 2¾" long. Instructions included.

Lisää...

Parantaa hylsyn syöttöä, irrotusta ja poistoa

Mahdollistaa juuri oikean taivutuksen asettamisen irtiottimeen ilman ylitaivuttamista, tarkkaan säädettynä aina unssiin asti. Käytä yhdessä Weigand Extractor Tension Gauges -mittareiden kanssa hienosäätääksesi irtiottimen optimaaliseen irrotukseen ja syöttövarmuuteen. Kanna mukanasi ampumaradalla varmistaaksesi irtiottimen parhaan suorituskyvyn.

TEKNISET TIEDOT: Alumiinia, luonnollinen viimeistely. Pituus 2¾" (noin 7 cm). Ohjeet sisältyvät.

Lisää...

Asiakasarviot: WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Arvioiden lukumäärä: 9
Arvostelut brownells.com sivustolla: 9
Arvioiden keskiarvo: 4,9

John Browning Would be Proud! (19.3.2010)

If you perform your own maintenance on your 1911 pistol, this is one tool you must own.

Your 1911's extractor is a critical component of your American legend and one that must be kept in prime condition if you expect it to perform reliably.

This tool, along with Weigand's extractor gauge set (very inexpensive) and an RCBS trigger pull gauge (also inexpensive)will allow you to easily and accurately determine and adjust your extractor's tension to just the right amount each and every time. No muss, no fuss, no guesswork.

This ingenius American-Made tool is inexpensive, and is for all practical purposes a hand-held arbor press. The accompanying instuctions make the set so simple to use that even a caveman can do it!

Weigand's extractor tool does exactly what he says it will. John Browning would be proud!

excellent tool (26.6.2010)

It is the right tool for your internal extractor, don't have to struggle with pliers and guessing. Excellent service! Received in three days.

Nice product, easy to use (31.8.2010)

Well machined tool, Made in the USA a plus! Instructions were easy to follow, great product. (Used in conjunction with ETG set from same company)

1911 auto extractor tensioning tool (12.9.2011)

I like the tool, it made adjusting the tension on the extractor very easy. I found the 1.5 inch 1/4-28 cap screw to be too short to adjust a 9 mmm (1911a1) properly. I substituted a 1.75 inch 1/4-28 cap screw which I cut the threads the full length of the cap screw. This gave me plenty of adjustment space to work with.

Great tool for making job easier (30.10.2012)

Great invention by Jack Weigand.
Makes setting precise extractor tension a breeze - no bending on the frame. Can even unbend if you go too much.

Suggest with the extractor tension gauges for a great set.

What a time saver! (1.12.2012)

I was really hesitant to purchase one of these at first because I did not want to spend the money on this, the tension gauge set, and a trigger pull gauge, but after months of failure to extracts from about 30% of my rounds I finally got fed up and forked the cash over. Now I am wishing I had not waited so long!

If you are experiencing symptoms of brass stovepiping in the ejection port, hitting your face or head, or even just never leaving the chamber at all, there is a very high probability that your extractor does not have enough tension and this gauge set will help you correct it.

First, let me say not to waste your time and efforts in following the DIY solutions given on YouTube. You will spend too long guessing and you will end up wasting your time and getting frustrated when you have to retune to your extractor every few weeks.

This tool is extremely easy to use! It even has groves so that your extractor sits in the correct position. Once you figure the proper positioning of the screw, you can lock it in place so the next time you need to do any readjustments, it is already in place for you.

I would highly recommend you get the tension gauge set along with this to adjust your extractor. It is very inexpensive and once you figuring out how to use everything, it will only take a few minutes to correct your tension, instead of the many hours to weeks of trial and error you would have wasted on guessing.

EAT! (6.2.2016)

Perfect tool. No more vice and hammer guessing or trying to bend in frame. Should of bought one years ago.

Allows precise tension (24.9.2016)

Started with a straight new extractor. This tool allowed precise adjustment and consistent pull test within 1-2 oz's. Like other tools for a specific job, this one fits the bill perfectly. Highly recommend for getting the ejector properly tuned.

Worth Every Penny (30.3.2018)

It took about an hour the 1st time I used it. But I took my time and it Works. Tuned the extractor on an ATI Titan 3" Officer model 1911. It would not extract at all until I tuned the extractor with this tool, the Gauge set, and a trigger pull gauge. Set it at 26 ounces and it worked perfect. From the factory it was only 12 ounces. Not nearly enough

<img width="500" src='/userdocs/reviewimages/fa0470fc-17c7-4c1b-ba4e-7e6fd60a9be1.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e6285fb7-0a2e-44a4-ab63-c2718629445b.jpg' alt=''>

Lue 9 arvostelua lisää brownells.com sivustolla

79.9 79.9 1 EUR

Tuotenro: 957000037
WEIGAND COMBAT EXTRACTOR TENSIONING TOOL
Valmistajan tuotenumero: EAT Mahdollistaa juuri oikean taivutuksen asettamisen irtiottimeen ilman ylitaivuttamista, tarkkaan säädettynä aina unssiin asti. Käytä yhdessä Weigand Extractor Tension Gauges -mittareiden kanssa hienosäätääksesi irtiottimen optimaaliseen irrotukseen ja syöttövarmuuteen. Kanna mukanasi ampumaradalla varmistaaksesi irtiottimen parhaan suorituskyvyn.

79.9 EUR 38 79,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Malli: Government, Commander, Officers Merkki: 1911

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Top takeaways

Mahdollistaa tarkan taivutuksen asettamisen irtiottimeen ilman ylitaivuttamista, käytettäväksi yhdessä Weigand Extractor Tension Gauges -mittareiden kanssa.
Valmistettu alumiinista, luonnollinen viimeistely, pituus 2¾" (noin 7 cm).
Ohjeet sisältyvät, sopii malleihin Government, Commander ja Officers.

Ominaisuudet

Malli: Commander,Government,Officers Valmistaja: 1911 Toimituksen paino: 0,159kg Toimituksen korkeus: 28mm Toimituksen leveys: 81mm Toimituksen pituus: 145mm

Tuotekuvaus

Made in USA

Säädä irtiotinta tarkasti 1911 Extractor Tensioning Toolin avulla. 🎯 Varmista optimaalinen suorituskyky ampumaradalla!

Improves Case Feeding, Extraction & Ejection

SPECS: Aluminum, natural finish. 2¾" long. Instructions included.

Lisää...

Parantaa hylsyn syöttöä, irrotusta ja poistoa

TEKNISET TIEDOT: Alumiinia, luonnollinen viimeistely. Pituus 2¾" (noin 7 cm). Ohjeet sisältyvät.

Lisää...

Asiakasarviot: WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Arvioiden lukumäärä: 9
Arvostelut brownells.com sivustolla: 9
Arvioiden keskiarvo: 4,9

John Browning Would be Proud! (19.3.2010)

excellent tool (26.6.2010)

It is the right tool for your internal extractor, don't have to struggle with pliers and guessing. Excellent service! Received in three days.

Nice product, easy to use (31.8.2010)

Well machined tool, Made in the USA a plus! Instructions were easy to follow, great product. (Used in conjunction with ETG set from same company)

1911 auto extractor tensioning tool (12.9.2011)

Great tool for making job easier (30.10.2012)

What a time saver! (1.12.2012)

EAT! (6.2.2016)

Perfect tool. No more vice and hammer guessing or trying to bend in frame. Should of bought one years ago.

Allows precise tension (24.9.2016)

Worth Every Penny (30.3.2018)

Lue 9 arvostelua lisää brownells.com sivustolla

Muut ostivat

ED BROWN

ED BROWN MATCH EXTRACTOR, SERIES 80, 9MM/.38S
1911 MATCH EXTRACTOR

Ulosvetimet

4,7

Varastossa

59,90 €

REDDING

REDDING COMPETITION SEATER DIE 45 ACP
COMPETITION HANDGUN SEATER DIES

Käsiaseiden holkit

Varastossa

194,90 € 189,90 € - 194,90 €

REDDING

REDDING ADJUSTABLE TAPER CRIMP DIE 40S&W/10MM
MICRO-ADJUSTABLE TAPER CRIMP DIES

Kiväärin holkit ja holkkisarjat

Varastossa

144,90 €

Tarkka EXTRACTOR TENSION GAUGE SET ampujille! 🎯 Mittaa reunajännite ja varmista luotettava patruunan syöttö. Sopii useimpiin kaliipereihin.

WEIGAND COMBAT

WEIGAND COMBAT EXTRACTOR TENSION GAUGE SET
EXTRACTOR TENSION GAUGE SET

Ulosvetimen työkalut

4,8

Varastossa

48,90 €

WEIGAND COMBAT
1911 EXTRACTOR TENSIONING TOOL

Asiakasarviot: WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Top takeaways

Ominaisuudet

Tuotekuvaus

Asiakasarviot: WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

WEIGAND COMBAT 1911 EXTRACTOR TENSIONING TOOL

Asiakasarviot: WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Top takeaways

Ominaisuudet

Tuotekuvaus

Asiakasarviot: WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Yhdistä

Turvalliset maksutavat

Ammattijärjestöt

Tervetuloa!

WEIGAND COMBAT
1911 EXTRACTOR TENSIONING TOOL