Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
S&W M&P VORTEX RAZOR SIGHT MOUNT

841370113958 296000698
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs *Rear sight pusher tool highly recommended* The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Smith & Wesson M&P C.O.R.E Series (Already optics ready) Smith & Wesson M&P Shield EZ .380 Smith & Wesson M&P .22 Compact Smith & Wesson SW9VE Smith & Wesson SW40VE Smith and Wesson's rear sight dovetails are known to vary in dimensions. Our sights are made to the same tolerances. Some users may have trouble installing our plate on their slide due to the varying tolerances in your slides. Please keep this in mind when ordering. Our return policy does allow for returns of unused and undamaged parts. These mounts should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.  
84.9 84.9 1 EUR
Tuotenro: 296000698
EGW SIGHT MOUNT FOR VORTEX RAZOR FITS S&W M&P BLACK
Valmistajan tuotenumero: 49445 841370113958 Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Vortex Razor, C-More RTS tai STS punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja laittaa takatähtäimen takaisin paikoilleen. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista takatähtäin* Asenna EGW Tähtäinkiinnike jyväkouruun Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW Tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin laitettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tuleviin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs *Takatähtäimen työntötyökalua suositellaan erittäin* Mukana tulevat ruuvit vaativat 5/64 tuuman kuusiokoloavaimen asennukseen. Tämä kiinnike ei sovi: Smith & Wesson M&P C.O.R.E Series (Jo optiikka valmis) Smith & Wesson M&P Shield EZ .380 Smith & Wesson M&P .22 Compact Smith & Wesson SW9VE Smith & Wesson SW40VE Smith & Wessonin takatähtäimen jyväkourujen mitat tunnetaan vaihteleviksi. Meidän tähtäimemme on valmistettu samoilla toleransseilla. Jotkut käyttäjät saattavat kohdata ongelmia kiinnikkeemme asentamisessa liukukappaleeseensa johtuen vaihtelevista toleransseista. Pidä tämä mielessä tilatessasi. Palautuskäytäntömme sallii käyttämättömien ja vahingoittumattomien osien palautukset. Nämä kiinnikkeet tulisi asentaa ja tarkistaa pätevän aseasepän toimesta. Tuotteemme väärästä asennuksesta tai käytöstä mahdollisesti aiheutuvista vahingoista tai vammoista ei oteta mitään vastuuta.
84.9 EUR 0 84,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: M&P Shield, SD40, M&P 2.0 Compact, SD9-VE, M&P 22 FS, M&P FS Materiaali: Aluminum Merkki: Smith & Wesson Tyyppi: Tactical Väri: Black

Top takeaways

  1. EGW:n kiinnikkeellä voit helposti asentaa Vortex Razor, C-More RTS tai STS punapistetähtäimen poistamalla aseen takatähtäimen.
  2. Asennuspakkaus sisältää kaikki tarvittavat kiinnitystarvikkeet ja asennusohjeet.
  3. Kiinnike ei sovi tiettyihin Smith & Wesson malleihin, kuten M&P C.O.R.E Series ja M&P Shield EZ .380.

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: M&P 2.0 Compact,M&P FS,SD40,SD9-VE,M&P 22 FS,M&P Shield Materiaali: Aluminum Tyyli: Tactical Valmistaja: Smith & Wesson Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Asenna Vortex Razor punapistetähtäin helposti S&W M&P -aseeseesi EGW-kiinnikkeellä. Mukana kaikki tarvittavat kiinnitystarvikkeet. 🚀 Osta nyt ja paranna tähtäystäsi! 🎯

Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs *Rear sight pusher tool highly recommended* The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Smith & Wesson M&P C.O.R.E Series (Already optics ready) Smith & Wesson M&P Shield EZ .380 Smith & Wesson M&P .22 Compact Smith & Wesson SW9VE Smith & Wesson SW40VE Smith and Wesson's rear sight dovetails are known to vary in dimensions. Our sights are made to the same tolerances. Some users may have trouble installing our plate on their slide due to the varying tolerances in your slides. Please keep this in mind when ordering. Our return policy does allow for returns of unused and undamaged parts. These mounts should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.