Korisi on tyhjä.

Ostoskori

09-5122933

Tilaa uutiskirje

BROWNELLS
CAN'T MAR™ 1911 AUTO BUSHING WRENCH

050806102200 080045045

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP), plus copies. Made from super tough ABS "T" grade polymers, Brownells Can't Mar™ wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar™ wrench carries easily in pocket or field kit.

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Lisää...

Ei vahingoita viimeistelyä-Käytännössä Särkymätön- Taskukokoinen-Monipuolinen, Kahden Pään Design

Jokaisen 1911-mallin omistajan ja asekaupan tarvitsee avain poistamaan piipun holkki 1911 Automaateista. Meidän avaimemme sopii kaikkiin kaliipereihin ja variaatioihin; Colt-valmistamat (mukaan lukien tehtaan Officers ACP) sekä kopiot. Valmistettu superkestävästä ABS "T" luokan polymeeristä, Brownells Can't Mar™ avain on paksumpi ja painavampi kuin muut synteettiset avaimet. Se irrottaa tiukimmatkin, kilpatason holkki ILMAAN naarmuttamatta tai vahingoittamatta aseen holkkiin tai liukupinnan viimeistelyä. Käytännössä särkymätön, Can't Mar™ avain kulkee helposti taskussa tai kenttävarustuksessa.

SPECS: Pituus 5½" (14.0cm). Leveys 1¼" (3.2cm). Paksuus .187" (4.75mm). Paino 1 oz. (28.3gm).

Lisää...

Asiakasarviot: BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Arvioiden lukumäärä: 14
Arvostelut brownells.com sivustolla: 14
Arvioiden keskiarvo: 3

Worked once....almost (22.8.2009)

I bought one of these for my Colt Officers ACP. The wrench plastic just deformed on the first use, didn't remove the bushing, and was useless from then on. The bushing is fairly snug on my .45 so maybe that's why it didn't work. Good idea but did not work for me. A waste of my [$] and not worth the cost of returning.

Disappointed.... (14.10.2009)

It worked splendidly a handful of times. After a couple of uses it starts to get seriously chewed up and malformed, leaving bits of orange plastic all down in the guide rod area of the gun. After about 10 uses it was so chewed up it would not successfully break down the gun.

Good tool at a fair price (1.11.2009)

I like this plastic tool better than the Brownells steel Colt wrench because it is light and scratch proof. It does mar slightly because it is plastic. Unless you have super tight bushings, it works perfectly. If you have super tight bushings, you may need the aluminum bushing wrench.

Works Great, Will Not Damage Gun (24.4.2010)

Works great, will not mar finish and holds up Great. have used one in my shop for years and have taken down 100's of 1911's with it, from time to time I have run across a gun with a spring cap, bushing or a slide that has a bur and it can leave a mark on it but that is not the fault of the tool. and if the tool where to brake they are so inexpensive that I would not hesitate to purchase a replacement.

Great Finish Saver (16.8.2010)

This bushing wrench is a real finish saver.. after struggling with an SA Pro bushing, can't imagine what damage may have resulted without it. Although it does shed a little plastic and seems somewhat consumable.. it's well worth every penny compared to refinishing.

It works but has limits (10.10.2010)

The good thing about this plastic wrench is that it doesn't mar the finish, and of course, you probably won't misplace it.

If you have a tight, accurized bushing, as I do, it won't last more than a few times before it gets chewed up. But for the price, buy a few of them.

Doesn't mar your pistols. (9.4.2011)

This tool does what it says but is a little on the soft side for tight bushings. I tore mine up pretty good when fitting a Wilson Combat bushing into my wife's Colt Officers model 1911. The wilson bushing is very tight fitting(good, good,good) after fitting for accuracy. I've recently up graded to the aluminum version.

Good Bushing Wrench and will not damage! (26.3.2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (6.9.2012)

I purchased 2 wrenches but found the tolerances are sloppy for a standard 1911 A1 recoil bushing. Trying to make it fit caused the wrench to slip and the recoil spring plug to go flying off the workbench. Cost to replace the plug plus freight about $16. Recommend to step up to the metal wrench.

Good For The Price (6.5.2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (6.7.2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13.9.2014)

Wears out very fast if you have a tight fitting bushing, this won't last long at all. Material is very soft and won't mar the gun but won't last long at all. On the first use, lots of mat'l chipped away from the tool. I imagine after about three uses it would be junk.

Also, so soft that it flexes so much that you can hardly hold the spring plug down enough to turn the bushing enough to lock back in place but it doesn't scratch your weapon at all.

I have now got the brownells enhanced bushing wrench with the flange that retains the recoil spring plug as you twist the bushing free, Great tool and won't scratch your weapon as it is made of aluminum. Well worth the extra money, remember you get what you pay for.

Should have gotten one sooner (6.9.2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10.12.2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Lue 14 arvostelua lisää brownells.com sivustolla

18.9 18.9 1 EUR

Tuotenro: 080045045
BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH
Valmistajan tuotenumero: 080045045 050806102200 Jokaisen 1911-mallin omistajan ja asekaupan tarvitsee avain poistamaan piipun holkki 1911 Automaateista. Meidän avaimemme sopii kaikkiin kaliipereihin ja variaatioihin; Colt-valmistamat (mukaan lukien tehtaan Officers ACP) sekä kopiot. Valmistettu superkestävästä ABS "T" luokan polymeeristä, Brownells Can't Mar™ avain on paksumpi ja painavampi kuin muut synteettiset avaimet. Se irrottaa tiukimmatkin, kilpatason holkki ILMAAN naarmuttamatta tai vahingoittamatta aseen holkkiin tai liukupinnan viimeistelyä. Käytännössä särkymätön, Can't Mar™ avain kulkee helposti taskussa tai kenttävarustuksessa.

18.9 EUR 843 18,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Malli: Government, Commander, Officers Merkki: 1911

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Top takeaways

Brownells Can't Mar™ 1911 Auto Bushing Wrench on valmistettu superkestävästä ABS "T" luokan polymeeristä, joka on paksumpi ja painavampi kuin muut synteettiset avaimet.
Se sopii kaikkiin 1911-mallin kaliipereihin ja variaatioihin, mukaan lukien Colt-tehtaan Officers ACP sekä kopiot.
Can't Mar™ avain irrottaa tiukimmatkin kilpatason holkit naarmuttamatta tai vahingoittamatta aseen holkkia tai liukupinnan viimeistelyä.

Ominaisuudet

Malli: Commander,Government,Officers Valmistaja: 1911 Toimituksen paino: 0,023kg Toimituksen korkeus: 13mm Toimituksen leveys: 79mm Toimituksen pituus: 150mm

Tuotekuvaus

Made in USA

🔧 Jokaisen 1911-mallin omistajan täytyy saada Brownells Can't Mar™ 1911 Auto Bushing Wrench! Sopii kaikkiin kaliipereihin, superkestävä ja naarmuttamaton. Osta nyt!

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Lisää...

Ei vahingoita viimeistelyä-Käytännössä Särkymätön- Taskukokoinen-Monipuolinen, Kahden Pään Design

SPECS: Pituus 5½" (14.0cm). Leveys 1¼" (3.2cm). Paksuus .187" (4.75mm). Paino 1 oz. (28.3gm).

Lisää...

Asiakasarviot: BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Arvioiden lukumäärä: 14
Arvostelut brownells.com sivustolla: 14
Arvioiden keskiarvo: 3

Worked once....almost (22.8.2009)

Disappointed.... (14.10.2009)

Good tool at a fair price (1.11.2009)

Works Great, Will Not Damage Gun (24.4.2010)

Great Finish Saver (16.8.2010)

It works but has limits (10.10.2010)

Doesn't mar your pistols. (9.4.2011)

Good Bushing Wrench and will not damage! (26.3.2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (6.9.2012)

Good For The Price (6.5.2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (6.7.2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13.9.2014)

Should have gotten one sooner (6.9.2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10.12.2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Lue 14 arvostelua lisää brownells.com sivustolla

Muut ostivat
Vaihtoehtoja

A-ZOOM 7MM-08 REMINGTON SNAP CAPS 2/PACK
A-ZOOM HARJOITUSPATRUUNAT

A-ZOOM

Varastossa

22,90 € * 16,90 € - 49,90 €*

Latausharjoitus- ja klikkipatruunat | Kuivaharjoittelu

4,2

LYMAN 308 WIN - 7.62X54R RIFLE M DIE
RIFLE 'M' DIES

LYMAN

Voi laittaa jälkitilaukseen

49,90 € *

Kiväärin holkit ja holkkisarjat

SMITH & ALEXANDER FLAT BLUE 1911 GOVT-COMMANDER
1911 MAINSPRING HOUSING W/ SLIM LINE MAGWELL

SMITH & ALEXANDER

Ei saatavilla

174,90 € * 169,90 € - 174,90 €*

Pääjousen kotelot

4,3

BRAVO COMPANY MOD-3 GUNFIGHTER GRIP POLYMER BLACK
AR-15 MOD-3 GUNFIGHTER GRIP

BRAVO COMPANY

Varastossa

32,90 € * 32,90 € - 35,90 €*

Pistoolikahvat

4,5

HIVIZ .250" FRONT SIGHT, RED
S&W CLASSIC, PERFORMANCE CENTER & DX MODELS OVERMOLDED SIGHTS

HIVIZ

Voi laittaa jälkitilaukseen

69,90 € * 69,90 € - 74,90 €*

Etutähtäimet

BROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH
1911 ANODIZED BUSHING WRENCH

BROWNELLS

Varastossa

34,90 € * 34,90 € - 42,90 €*

Piippukauluksen työkalut

4,8

Kirjaudu sisään

Unohditko salasanasi?
Rekisteröidy

Some

Sivuillamme

Tuoteryhmät

Tilaaminen

Asiakaspalvelu

Tervetuloa!

Tervetuloa brownells.fi sivustolle. Meillä on Suomen laajin valikoima asesepän tarvikkeita ja työkaluja, aseiden osia, jälleenlatausvälineitä, luoteja, hylsyjä, ammuntavarusteita, optiikkaa ja paljon muuta. Kymmenien tuhansien tuotteiden varasto, josta voit valita itsellesi sopivimmat tuotteet, olitpa sitten ampuja, metsästäjä tai aseseppä.

Tietoa meistä

Ampujat, metsästäjät, asesepät, aseharrastajat ja aseita työssään käyttävät ovat aina voineet kääntyä Brownellsin puoleen etsiessään korkealaatuisia tuotteita, osia, työkaluja, lataustarvikkeita, optiikkaa tai muuta aseisiin liittyvää. Meillä on aina 100% tyytyväisyystakuu!